Forex position size: lots, notional and pip value

A lot converts a number in an order window into exposure. With a contract size of 100,000 EUR, 0.18 lots of EUR/USD means 18,000 EUR and USD 1.80 per pip. Choosing that number requires more than checking whether margin is available. Follow a hypothetical USD and PLN loss budget through the price distance, currency conversion and permitted volume step.

Standard, mini and micro lots in a linear EUR/USD contract: 100,000, 10,000 and 1,000 EUR respectively. Pip values use an assumed USD/PLN rate of 4.0000; fees are excluded.

Start with a contract, not the default Volume field

A trader wants to test a position-sizing calculation with a USD 62.50 total loss allowance and a flat USD 6.00 fee (illustrated below on a non-USD PLN account at 4.0000 PLN/USD: PLN 250 total loss allowance with a flat PLN 24 fee). This is an arbitrary teaching input, not a recommended account percentage. The model uses a long linear EUR/USD CFD, a 100,000 EUR contract per lot, a pip of 0.0001 USD/EUR and a single conversion rate of 4.0000 PLN/USD.

The flat fee (PLN 24 / USD 6.00 for the complete transaction) is identical in both scenarios below; it is an invented contract term to make the arithmetic explicit, not a typical commission schedule. Execution-price differences include their own bid/ask effect, so no extra spread is deducted.

Permitted volumes are multiples of 0.01 lots, from 0.01 to 100 lots. Real minimums, steps, limits and contract sizes come from the symbol specification. MetaQuotes and cTrader list these properties separately. [1], [3]

Separate the allowance from the price distance

Deducting the fee leaves 250 − 24 = PLN 226 for price loss (equivalent to 62.50 − 6.00 = USD 56.50 in USD). Suppose the position opens at an executed ask of 1.08500 and closes at an executed bid of 1.08200 USD/EUR. The adverse distance is 0.00300 ÷ 0.0001 = 30 pips.

A full lot has a pip value of 100,000 EUR × 0.0001 USD/EUR = USD 10, then USD 10 × 4.0000 PLN/USD = PLN 40 per pip per lot. Over 30 pips, 1.00 lot would produce a USD 300 (PLN 1,200) price loss.

Lots before applying the step = 226 PLN ÷ (30 pips × 40 PLN/pip/lot) = 56.50 USD ÷ (30 × 10 USD/pip/lot) = 0.188333… lots.

The units cancel to lots. Using USD 10 where the allowance is in PLN would mix currencies and oversize the model position fourfold.

Why 0.18 lots passes, while 0.19 does not

Our purpose is to stay within the stated model allowance, so the raw result is rounded down to the permitted 0.01-lot step: 0.18 lots. Conventional rounding to two decimal places would instead give 0.19, which fails the condition.

Same 30-pip execution distance and flat PLN 24 (USD 6.00) fee
VolumePip value (PLN / USD)Price lossLoss including the fee
0.18 lotsPLN 7.20/pip (USD 1.80)PLN 216 (USD 54.00)PLN 240 (USD 60.00) — within 250 / 62.50
0.19 lotsPLN 7.60/pip (USD 1.90)PLN 228 (USD 57.00)PLN 252 (USD 63.00) — above 250 / 62.50

The remaining PLN 10 (USD 2.50) in the first row is unused allowance, not a promised buffer against all execution risk. The acceptable result must also pass the minimum, maximum and total-volume rules; the number of decimal places alone does not establish validity.

Move the model exit farther away: volume changes

Keep the opening ask at 1.08500, but use an executed closing bid of 1.08050 USD/EUR. The adverse distance is now 45 pips. With the same allowance, fee and conversion rate:

226 ÷ (45 × 40) = 56.50 ÷ (45 × 10) = 0.125555… lots → 0.12 lots after the step.

The pip value is PLN 4.80 (USD 1.20), the price loss is 45 × 4.80 = PLN 216 (USD 54.00) and the total including the fee is again PLN 240 (USD 60.00). Rounding up to 0.13 lots would give 45 × 5.20 + 24 = PLN 258 (USD 64.50).

The two cases share the same model loss, but they do not describe the same position: 0.18 lots represents 18,000 EUR; 0.12 represents 12,000 EUR. A longer price distance does not itself justify a larger monetary allowance. Nor does this arithmetic identify a sensible exit level or a good trade.

Sometimes the correct result is no permissible volume

Reduce the total allowance to PLN 30 (USD 7.50) while retaining the 30-pip distance and flat PLN 24 (USD 6.00) fee. Only PLN 6 (USD 1.50) remains for price loss. The raw volume is 6 ÷ (30 × 40) = 1.50 ÷ (30 × 10) = 0.005 lots, below the model minimum.

At the minimum 0.01 lots, the price loss would be PLN 12 (USD 3.00) and the total PLN 36 (USD 9.00). Rounding up would violate the PLN 30 (USD 7.50) condition. There is no permissible positive volume under these assumptions. Zero means no position, not a valid 0.00-lot order. A different contract would require a fresh specification and cost calculation.

This is why the minimum deserves its own check. The instruction “always round to the nearest micro lot” would silently change the problem being solved.

A model loss is not a maximum possible loss

Our exit prices are assumed executions. An ordinary stop order does not guarantee them. A gap, slippage, a different conversion rate or additional charges can make the realised loss exceed the model allowance. For a real schedule, a volume-dependent fee belongs inside the sizing calculation rather than being copied from our flat-fee example.

Notional and margin answer different questions. At the opening price of 1.08500, 0.18 lots represents 18,000 EUR × 1.08500 = USD 19,530, or PLN 78,120 at our conversion rate. That notional is neither the PLN 250 allowance nor the collateral required to open the position. The margin section and the next lesson separate those quantities.

The calculation teaches a chain: explicit loss scenario → value per pip in the same currency → raw volume → permitted volume → independent check. Broader risk limits and portfolio decisions require the additional assumptions explained in the course’s position-sizing lesson.

Try it yourself

Three exercises: convert, apply the step, recognise an impossible size

The first two exercises check the main explanation; the third is optional. Choose an answer or open the worked solution, which also works without JavaScript.

1. What does 0.18 lots represent in this specification?

Contract size is 100,000 EUR per lot; pip = 0.0001 USD/EUR; the single conversion rate is 4.0000 PLN/USD.

Show the answer and explanation

Correct answer: 18,000 EUR and PLN 7.20 per pip. Units = 0.18 × 100,000; pip value = 18,000 × 0.0001 = USD 1.80; then 1.80 × 4.0000 = PLN 7.20.

The first and fourth choices shift the volume by a factor of ten. The second correctly counts euros but labels a USD pip value as PLN.

Return to the explanation.

2. Which volume is the largest permitted one within the model allowance?

Total allowance PLN 250; flat fee PLN 24; adverse execution distance 30 pips; pip value PLN 40 per lot. Permitted volumes are multiples of 0.01 from 0.01 to 100 lots.

Show the answer and explanation

Correct answer: 0.18 lots. The price-loss allowance is 250 − 24 = PLN 226. Dividing by 30 × 40 gives 0.188333…; the largest permitted step below that is 0.18.

Its total is PLN 240. At 0.19 the total is PLN 252; at 0.20 it is PLN 264. The raw fractional result is outside the permitted volume grid.

Return to the explanation.

3. Optional: what if the total allowance falls to PLN 30?

Retain the flat PLN 24 fee, 30-pip distance and PLN 40 per pip per lot. Minimum and step are both 0.01 lots; all assumptions are unchanged.

Show the answer and explanation

Correct answer: no permissible positive volume. Only PLN 6 remains after the fee. The raw 0.005 lots is below the minimum; the smallest permissible position totals PLN 36.

0.02 lots totals PLN 48. Rounding upward or ignoring the volume specification would change the problem. No position is different from submitting an invalid zero-volume order.

Return to the explanation.

Explore the details

Go further: volume specifications, currency exposure and calculators

The case above combines a loss scenario with a deliberately simple flat fee. The reference tables and calculator below instead work from a target value per pip. Keep those inputs distinct: a pip-value target is not a complete loss budget.

The examples are hypothetical. Unless stated otherwise, EUR/USD is 1.0850 USD/EUR, USD/PLN is 4.0000 PLN/USD, the contract size is 100,000 base-currency units, and a pip is 0.0001 (with 0.01 as the exception in the JPY examples). A single conversion rate excludes the spread and fees. The notional and pip value in the account currency depend on the rates used; they are not an offer from a bank or broker.

1. What volume means — two reference tables

The first table answers the question “what do I control at a given volume?” All rows use the same hypothetical EUR/USD specification: a contract size of 100,000 EUR, a rate of 1.0850 USD/EUR, a pip of 0.0001 USD/EUR and a single USD/PLN rate of 4.0000. The EUR notional is fixed for a given number of lots; its USD equivalent changes with the pair’s rate, while the PLN pip value also changes with USD/PLN.

Lots, units, notional and pip value — one EUR/USD model
VolumeBase-currency unitsUSD notionalPip value in USDPip value in PLN
0.01 lots1,000 EUR1,085.00 USD0.10 USD/pip0.40 PLN/pip
0.02 lots2,000 EUR2,170.00 USD0.20 USD/pip0.80 PLN/pip
0.05 lots5,000 EUR5,425.00 USD0.50 USD/pip2.00 PLN/pip
0.10 lots10,000 EUR10,850.00 USD1.00 USD/pip4.00 PLN/pip
0.23 lots23,000 EUR24,955.00 USD2.30 USD/pip9.20 PLN/pip
0.37 lots37,000 EUR40,145.00 USD3.70 USD/pip14.80 PLN/pip
0.50 lots50,000 EUR54,250.00 USD5.00 USD/pip20.00 PLN/pip
1.00 lot100,000 EUR108,500.00 USD10.00 USD/pip40.00 PLN/pip

The 10,850 USD notional in the 0.10-lot row is neither the margin reserved by the broker nor the maximum loss. The figure of 4 PLN/pip describes the change for a one-pip move, not the total transaction cost. No column tells you which volume is appropriate for the account balance: that requires separate assumptions about risk.

The second table works in the opposite direction: the target pip value in PLN is divided by 40 PLN/pip for 1 lot. The model uses multiples of 0.01 lots, a minimum of 0.01 and a maximum of 100 lots. We round down so that the pip value does not exceed the stated target.

Working backwards with minimum and step checks
Target in PLN/pipLots before applying the stepLots after applying the stepAchieved value
0.200.005No permissible resultThe 0.01 minimum would give 0.40 PLN/pip
0.400.0100.010.40 PLN/pip
1.000.0250.020.80 PLN/pip
4.000.1000.104.00 PLN/pip
6.680.1670.166.40 PLN/pip
20.000.5000.5020.00 PLN/pip

A target of 0.20 PLN/pip does not lead to an “almost equivalent” 0.01 lots: that volume would double the pip value. A result below the minimum means there is no permissible volume in this model. Achieving the target would require a different specification, rather than silently rounding up. Whether another contract is available must be checked with the provider.

The default 1.00 in the order window does not follow from these calculations. Before submitting the order, compare the field value with your own unit calculation. Changing the single USD/PLN rate from 4.00 to 4.20 increases the pip value for 1 lot from 40 to 42 PLN. A target of 20 PLN/pip then gives 20/42 = 0.476190... lots; applying a 0.01 step gives 0.47 lots and 19.74 PLN/pip. These figures depend on the model exchange rate, not the account balance.

2. What a lot and contract size mean

A lot is a conventional unit of volume. Contract size specifies how many units of the asset correspond to 1 lot. In this article’s currency model, 100,000 base-currency units means 100,000 EUR for 1 lot of EUR/USD, but 100,000 USD for 1 lot of USD/JPY. These are not equal monetary notionals. In MT5, contract size is a separate symbol property; cTrader displays lot size and currencies in the Active Symbol Panel.[1], [3] For other assets, we use separately stated parameters.

Number of units = lots × contract size. 0.25 lots with a contract size of 100,000 represents 25,000 units of the base currency. Other CFD instruments (gold, indices and oil) may have entirely different contract sizes — see section 9.

In a CFD, notional describes economic exposure, not cash that you physically exchange. Required margin, available leverage and account limits are different quantities. A correctly calculated volume on this page does not itself confirm that a position can be opened. Checking the collateral requirements belongs in lesson 2.6 on leverage and margin.

For a fixed pip size of 0.0001, 100,000 units × 0.0001 gives 10 units of the quote currency. This does not follow from the number of digits displayed by the platform: a full pip can still be 0.0001 when five decimal places are displayed. Unit definitions are covered in lesson 2.4, and wholesale notional conventions in the article on the interbank market.

3. Lot types and volume limits

Standard, mini and micro with a 100,000 EUR contract
NameVolume fieldBase-currency unitsBase-currency notional (EUR/USD)EUR/USD pip valuePip value (in PLN*)
Standard1.00100,000100,000 EUR10.00 USD40.00 PLN
Mini0.1010,00010,000 EUR1.00 USD4.00 PLN
Micro0.011,0001,000 EUR0.10 USD0.40 PLN

* at a USD/PLN rate of 4.00 PLN. At another USD/PLN rate, the PLN value changes proportionally.

A volume of 0.37 lots converted into base-currency units, USD notional and pip value in PLN.
A volume of 0.37 lots converted into base-currency units, USD notional and pip value in PLN.

A micro lot is 0.01 lots. With a contract size of 100,000 units, this represents 1,000 base-currency units. It is not necessarily the symbol’s minimum: the minimum and step are defined separately. A small number in the Volume field does not establish a small notional outside this specification, or low risk across the portfolio.

Fractions such as 0.07, 0.23 or 1.47 lots are also permitted if they fit the symbol’s increments and range. When the aim is not to exceed a target pip value, choose the nearest permissible volume below the calculation. The number of decimal places in the result does not determine the step: 0.167 is not permitted with a 0.01 step, even if the calculator can display three digits.

The platform will not accept just any number. The volume range and step are further symbol-specification parameters:

The minimum, step and maximum are separate constraints
Parameter (MT5)What it specifiesModel value; check your own
SYMBOL_VOLUME_MINMinimum order volume0.01 lots
SYMBOL_VOLUME_STEPPermitted volume increment0.01 lots
SYMBOL_VOLUME_MAXMaximum order volumea value that depends on the symbol and broker

In MT5, check the specification in Market Watch; in cTrader, check the symbol information in the Active Symbol Panel.[2], [3] With permitted multiples of 0.01, a result of 0.167 gives 0.16 lots; with a 0.1 step, it gives 0.1 lots. Also check the maximum for a single order and any limit on total volume in one direction. The latter is not the same as volume max.[1]

4. From lots to units, notional and pip value

From the article on units of measurement you know that, for many pairs, 1 pip corresponds to a change of 0.0001, and for many yen pairs, to 0.01 (the quoting convention and symbol specification are decisive). Before connecting pips with lots, let us organise three quantities that describe the same position:

Three quantities for one position (example: 0.37 lots of EUR/USD, contract size 100,000, rate 1.0850):
• Units = lots × contract size = 0.37 × 100,000 = 37,000 EUR — notional in the base currency
• Equivalent value in the quote currency = base-currency notional × rate = 37,000 × 1.0850 = 40,145 USD — this value changes with the exchange rate
• Pip value = units × pip size = 37,000 × 0.0001 = 3.70 USD, or approximately 14.80 PLN at USD/PLN = 4.00
Formula: Value of 1 pip = position size (in units) × pip size
The result is in the quote currency. If the quote currency ≠ account currency → convert using the current exchange rate.
Pip value for 1.00, 0.10 and 0.01 lots — stated model rates
PairStandard lot
(1.00)
Mini lot
(0.10)
Micro lot
(0.01)
Note
EUR/USD10.00 USD1.00 USD0.10 USDQuote currency = USD → a fixed 10 USD
GBP/USD10.00 USD1.00 USD0.10 USDAs above
USD/JPY~6.56 USD~0.66 USD~0.07 USD1,000 JPY ÷ rate (~152.50). Changes with the rate.
USD/CHF~11.30 USD~1.13 USD~0.11 USD10 CHF ÷ rate (~0.8850). Changes with the rate.
EUR/PLN10 PLN1 PLN0.10 PLNQuote currency = PLN → a fixed value
USD/PLN10 PLN1 PLN0.10 PLNAs above

For EUR/PLN and USD/PLN, the calculations are simplest: if the account is denominated in Polish zlotys and you trade pairs containing PLN, the pip value with a contract size of 100,000 and pip size of 0.0001 is exactly 10 PLN per standard lot. No conversion or calculator is needed.

But if you have a PLN-denominated account and trade EUR/USD, you must convert: pip value = 10 USD × USD/PLN rate (4.00 PLN) = 40.00 PLN. This extra step is a frequent source of mistakes — we describe it in section 5.3.

4.1. Working backwards: from a desired pip value to volume

A common situation: you want a 1-pip move to be worth a specific amount — for example, exactly 20 PLN on EUR/USD in a PLN-denominated account. Simply rearrange the formula:

Lots = desired pip value ÷ pip value for 1 lot (in the account currency)
Pip value for 1 lot of EUR/USD in PLN: 10 USD × 4.00 = 40 PLN.
Lots = 20 ÷ 40 = 0.50 lots. Check: 0.50 × 100,000 × 0.0001 = 5 USD = 20 PLN per pip.

This rearrangement is valid for a linear instrument and the appropriate pip value for 1 lot in the target currency. For USD/JPY on a PLN-denominated account, you first need to value 1,000 JPY/pip in PLN; only then do you divide the target. For a nonlinear instrument or a different settlement method, do not automatically substitute 100,000 × 0.0001. Check contract size, tick value and calculation mode; in MT5, you can compare your estimate with OrderCalcProfit.[4]

Working backwards in EUR/USD: a target of 20 PLN/pip divided by 40 PLN/pip per lot gives 0.50 lots; checks show 50,000 EUR and USD 54,250 notional at EUR/USD 1.0850.
A pip-value target does not set the maximum loss.

4.2. Multiple positions: gross, net and currencies

Positions with the same base currency can be added in that currency’s units, but their quote-currency exposures still require a separate calculation. Opposite positions in the identical pair partially offset net exposure, but the sum of gross notionals and the margin rules do not automatically disappear. Under a hedging model, two positions may remain open; under netting, the symbol’s position is recorded differently. Simply subtracting lots does not replace a calculation of portfolio risk.[1]

Three positions: gross, net and currencies

Hypothetical CFDs, a contract size of 100,000 base-currency units, EUR/USD at 1.0850 and GBP/USD at 1.2650. In the table, plus/minus signs describe directional economic exposure at these prices. This is not a statement of physically delivered cash or bank currency balances.

Checking the direction of economic currency exposure
PositionEURGBPUSD
Buy 0.30 EUR/USD+30,0000−32,550
Buy 0.20 GBP/USD0+20,000−25,300
Sell 0.10 EUR/USD−10,0000+10,850
Directional total+20,000+20,000−47,000

EUR/USD has a gross volume of 0.30+0.10 = 0.40 lots, or 40,000 EUR, and a net volume of 0.30−0.10 = 0.20 lots, or 20,000 EUR. GBP/USD has 0.20 lots and 20,000 GBP. We do not add 20,000 EUR to 20,000 GBP as though they were one currency. The sum of the gross USD equivalents of all base-currency legs is 32,550+25,300+10,850 = 68,700 USD. Directional USD exposure in this model is −47,000 USD; that is a different quantity.

At unchanged rates, 20,000 EUR × 1.0850 +20,000 GBP × 1.2650 = 47,000 USD, which checks the total in the final row. A change in rates changes the portfolio’s valuation. Financing costs, fees and collateral also depend on how the account is operated. Do not infer from the net figure alone that three contracts have the same costs as one. Risk from shared factors is discussed in the article on correlation and portfolios.

5. Working backwards and applying volume increments

The following reference examples and calculator start from a target monetary value for one pip. This is one input used in the opening case, not a complete loss budget. A budget also needs a price-loss scenario and a cost model. Broader position sizing is covered in a separate article.

5.1. Formula and unit checks

Lots before applying the step = monetary target per pip ÷ pip value for 1 lot
Both monetary values must be in the same currency. Dividing PLN/pip by PLN/pip/lot leaves lots. Then check the step, minimum, maximum and other symbol constraints.

The calculator and examples below explicitly model permitted volumes as multiples of the step. The minimum must belong to that set. If your symbol’s documentation specifies a different rule, these settings do not describe its permissible volumes. Mathematical rounding to two digits can increase the result: 0.167→0.17. For a “no more than” target, round down to the permitted step: 0.16 with a 0.01 step.

1. Target 6.68 PLN/pip desired value target upper limit 2. Value for 1 lot 10 USD/pip x 4 PLN/USD = 40 PLN/pip/lot 3. Divide 6.68 / 40 = 0.167 4. Round down LOT = 0.16 Achieved 6.40 PLN/pip (with a 0.01 step)
From the target pip value in PLN to volume after applying the step. This is a unit calculation; it does not set a loss budget.

5.2. EUR/USD on a USD-denominated account

Model target: 1.67 USD/pip. With 1 lot of 100,000 EUR and a pip of 0.0001 USD/EUR, the value is 10 USD/pip/lot. We divide 1.67/10 = 0.167 lots. A 0.01 step gives 0.16 lots. Check: 0.16 × 100,000 × 0.0001 = 1.60 USD/pip. The notional is 16,000 EUR, or 17,360 USD at EUR/USD 1.0850.

A result of 0.17 lots would give 1.70 USD/pip and exceed the 1.67 target. Applying the step gave 0.16 lots and 1.60, or 0.07 USD/pip less. A test move of 30 pips would change the model value by 48 USD before fees. We do not call that 48 USD a maximum loss or guaranteed stop execution.

5.3. EUR/USD on a PLN-denominated account — an extra step

Model target: 6.68 PLN/pip, with a single USD/PLN rate of 4.0000. The value for 1 lot is 10 USD/pip × 4 PLN/USD = 40 PLN/pip. Volume before applying the step is 6.68/40 = 0.167 lots; with a 0.01 step it is 0.16 lots. Check: 0.16 × 40 = 6.40 PLN/pip, 16,000 EUR of units and a 17,360 USD notional.

Omitting conversion and dividing 6.68 PLN by 10 USD/pip/lot does not give the correct unit. The incorrect numerical result of 0.668 lots would be four times the 0.167 before applying the step. After separately rounding to 0.66 and 0.16, the ratio is no longer exactly 4. That is why we assess the currency error before applying the step, and check the resulting volumes again.

5.4. EUR/PLN on a PLN-denominated account

Model target: 2.50 PLN/pip. With a contract size of 100,000 EUR and a pip of 0.0001 PLN/EUR, 1 lot gives 10 PLN/pip. Lots = 2.50/10 = 0.25; this is a permissible multiple of the 0.01 step and needs no rounding. The units are 25,000 EUR, and the notional at EUR/PLN 4.3000 is 107,500 PLN.

A test move of 80 pips × 2.50 PLN/pip gives a 200 PLN change in the model value before fees. The absence of conversion simplifies the units, but does not determine required cash, fees or execution risk. The 107,500 PLN notional and 200 PLN change are not the same as the balance or margin.

Calculator: from pip value to lots

Linear model. Enter the specification and exchange rates; the result after applying the step does not exceed the target. The calculator does not connect to a broker.

Permissible volume under the model
0.50 lots
Target per pip20.00 PLN/pip
Achieved after applying the step20.00 PLN/pip
Model change for the test move1000.00 PLN
Base-currency units50,000 base-currency units
Equivalent notional in the quote currency54,250.00 USD

Model increments: multiples of the step; the minimum must be a multiple of it. Positive decimal values, up to 12 decimal places; no exponential notation. For a target below the minimum or above the maximum, the calculator does not indicate a permissible volume. Conversion uses a single rate and excludes fees. It does not check margin, total account limits or price availability.

Volume calculated from pip value does not set a stop-loss or a loss budget. The result for the test move excludes separate fees. When assessing a planned loss, distinguish the SL level from the actual execution price; if the result has already been calculated from actual ask/bid prices, the spread is included and must not be deducted again. We discuss order execution and slippage in the article on order types and execution modes, and you can calculate full sizing, notional and required collateral in the position size calculator, the lot value calculator, the margin calculator and the pip value calculator.

Volume describes the size of exposure. Planning a loss budget also requires portfolio rules, execution terms and costs; these are developed in risk per trade and limits and position sizing. A very large amount relative to liquidity may receive a different execution price; the mechanics are discussed in lesson 2.7.

6. The trap: pips versus platform points

NOTE: pips, points and lots are different units.

A typical EUR/USD symbol in MetaTrader is quoted to five decimal places (the number of digits is a symbol property): 1.08421. This fifth digit represents a pipette (fractional pip) = 1/10 of a pip. On such a five-digit symbol, a platform point usually corresponds to one pipette, but point and tick size remain separate specification parameters.

The problem appears in the order window. In MetaTrader, pips are easily confused with points because many settings, indicators and scripts work in points (pipettes). If you want to set a 30-pip SL on five-digit EUR/USD, this will often correspond to 300 points. Verify this on the particular platform and with the particular broker.

If you mistakenly enter 30 points (thinking they are pips), your stop-loss is only 3 pips. That stop is ten times tighter than intended — completely changing the trade’s risk profile. The units of the SL/TP fields on the particular platform must be verified (documentation: MetaQuotes, MQL5 Reference) — most simply on a demo account or with one test order.

Pips, points and lots are different units: in the EUR/USD model, 30 pips equal 300 points and a price distance of 0.0030; volume of 0.10 lots represents 10,000 EUR.
Read the order field’s unit from its description.

7. Margin — how much the broker reserves

Notional, volume and margin are different quantities. A correct number of lots describes exposure, while margin is collateral reserved under the account and symbol rules. It is not the purchase price of the entire notional, a transaction cost or a standalone loss limit. Do not derive it from pip value.

Required collateral, available leverage and position-closing mechanisms must be checked separately. Formulas and regulations are covered in lesson 2.6, and client status in the regulation and safety section. This page does not establish one leverage level for every user and instrument.

8. Seven unit checks before entering Volume

  1. What does 1 lot mean? The contract size and asset unit from the specification.
  2. Which currency is the base and which is the quote? The rate notation must specify the quote currency per 1 base-currency unit.
  3. How many units and what notional? Lots × contract size, then × the pair’s rate.
  4. What is the pip value in the account currency? Pip size, volume and an explicit conversion direction.
  5. Does the volume fit the permitted increments? The step and rule for permitted values, not just the number of digits.
  6. Is it within the range? The minimum, order maximum and separate aggregate limit; a result below the minimum does not justify increasing the target.
  7. What are the portfolio’s gross and net exposures? Units of each currency separately; check margin and risk in the relevant articles.

Read any missing parameter from the specification. The calculator operates on the entered data and does not automatically supply private account terms. Sources 1–3 explain what these mean in MT5 and cTrader.

9. Lots in gold, oil and indices — contract specifications

The same number in the Volume field ≠ the same exposure.

On two instruments, 0.10 lots need not mean the same amount of the asset or value of a price move. Comparing them requires contract units and the method for calculating profit or loss. The label “lot” or “point” alone supplies no common denominator. The table below identifies parameters to read from the specification; the model beneath it demonstrates the difference numerically.

In this article, we use a contract size of 100,000 base-currency units for FX. We do not assume that value by default for metals, oil or indices. Even a similarly named symbol may have a different price unit, contract size and tick value with another provider. These are parameters to check, not data to inherit from the previous order.

Parameters to check for FX, metals, oil and indices
InstrumentContract sizeTick sizeTick valueWhere to check
EUR/USD100,000 EUR (this article’s example)0.000011 USD per 1 lotsymbol specification
XAU/USD (gold)according to the particular symbol’s specificationaccording to the brokeraccording to the brokersymbol specification
USOIL (WTI oil)according to the particular symbol’s specificationaccording to the brokeraccording to the brokersymbol specification
US500, DE40 (indices)according to the brokeraccording to the brokeraccording to the brokersymbol specification

These instruments’ specifications can differ substantially between brokers — so instead of “typical” values, the table identifies what to check in the symbol specification before the first order.

For comparison: an exchange-traded euro futures contract (CME 6E) is for 125,000 EUR — futures-market units do not transfer 1:1 to retail CFDs.

Always check your broker’s “Contract Specifications” before opening a position in an instrument other than a currency pair. Checking the specification before the first order in a new instrument prevents serious risk-calculation errors.

The same number of lots does not give the same units or value of a move in a currency pair, gold and an index.
The same number of lots does not give the same units or value of a move in a currency pair, gold and an index.

The same number of lots, different units

Three hypothetical linear specifications, none of which is a broker’s offer. We compare 0.10 lots, but not “the same pip” across all instruments.

0.10 lots under three different contract specifications
ModelSpecification for 1 lotWhat 0.10 lots meansValue of the stated move
EUR/USD100,000 EUR; pip 0.0001 USD/EUR10,000 EUR1 pip: 1 USD
Gold100 ounces; price in USD/ounce10 ouncesA move of 1 USD/ounce: 10 USD
Index1 USD per 1 point per 1 lot0.10 USD/pointA 1-point move: 0.10 USD

For gold, 10 ounces × 1 USD/ounce = 10 USD. For EUR/USD, 10,000 EUR × 0.0001 USD/EUR = 1 USD. Both positions have 0.10 lots, but we compared different units of change. Gold notional also requires the USD/ounce price; the index model requires its level and multiplier. Do not assess exposure size from the Volume field alone.

10. Check your understanding

Exercise: You open 0.23 lots of EUR/USD (contract size 100,000, EUR/USD rate 1.0850, USD/PLN = 4.00). Calculate: (a) the number of units, (b) the USD equivalent of the notional, (c) the pip value in USD and PLN. Finally, work backwards: (d) what volume gives a pip value of exactly 20 PLN?

Answer: (a) 0.23 × 100,000 = 23,000 EUR. (b) 23,000 × 1.0850 = 24,955 USD. (c) 23,000 × 0.0001 = 2.30 USD, or 2.30 × 4.00 = 9.20 PLN. (d) the pip value for 1 lot = 40 PLN, so 20 ÷ 40 = 0.50 lots.

FAQ — lots, notional and volume

What does 1 lot of EUR/USD mean?

With a contract size of 100,000 EUR, it is 100,000 EUR of base-currency exposure. At 1.0850 USD/EUR, the notional is equivalent to 108,500 USD. In a CFD, this does not mean physically receiving euros.

How do standard, mini and micro lots differ?

They are 1.00, 0.10 and 0.01 lots. With a contract size of 100,000 units, they represent 100,000, 10,000 and 1,000 base-currency units. A micro lot is not necessarily the symbol’s minimum volume.

How do you calculate lots from a target pip value in PLN?

First calculate the pip value for 1 lot in PLN, then divide the target by that value. In the EUR/USD model, 10 USD/pip × USD/PLN 4.0000 = 40 PLN/pip/lot; a target of 20 PLN/pip gives 0.50 lots.

What should you do if the result is below the minimum?

Do not present a higher volume as meeting the target. With a target of 0.20 PLN/pip, a value of 40 PLN/pip/lot and a minimum of 0.01 lots, the result of 0.005 is impermissible, while the minimum would give 0.40 PLN/pip. A different specification would be needed.

Can opposite positions simply be subtracted?

Subtraction describes net exposure on the identical pair. Gross exposure remains the sum of notionals, while costs and margin depend on the account rules. Positions in different pairs require a separate currency ledger.

Is a lot the same in FX, gold and an index?

No. Contract size, the price unit and the profit/loss calculation method come from the symbol specification. The same 0.10 lots cannot be equated with the same exposure or value of a move.

Sources and how they are used

  1. MetaQuotes — Symbol Properties — Contract size, profit currencies, volume min/max/step/limit; different calculation modes and hedged margin. Accessed: 15 November 2026.
  2. MetaTrader 5 — Market Watch — The symbol specification and contract parameters. Accessed: 15 November 2026.
  3. cTrader — Active Symbol Panel — Lot size, base/quote currencies, minimum and maximum volume, and minimum price change. Accessed: 15 November 2026.
  4. MetaQuotes — OrderCalcProfit — Estimating profit or loss in the account currency for specified prices and volume. Accessed: 15 November 2026.
  5. CME — Euro FX Contract Specifications — Exchange-traded 6E is for 125,000 EUR; its specification is separate from the 100,000 EUR CFD model. Accessed: 15 November 2026.

All prices and specifications of the OTC models are hypothetical. Our calculations check units, currencies and permitted volume increments; they do not confirm private account parameters.

Your learning progress

Finished this lesson? Mark it yourself. Opening or scrolling a page never marks it complete.

Progress requires JavaScript and browser storage.

Saved only in this browser. No account or cross-device sync. Clearing site data can erase your progress.

Jarosław Wasiński

Editor-in-chief, ForexMechanics.com • Macro & FX analyst

Independent analyst and practitioner with over 20 years of experience in financial markets. Actively involved in Forex since 2007, with a focus on fundamental analysis, OTC market structure, and disciplined capital risk management.

  • Creator and editor-in-chief of MyBank.pl, providing reliable financial education since 2004.
  • Author of hundreds of in-depth market commentaries, structural analyses, and educational materials for traders and investors.
  • Advocate for market transparency, promoting education grounded in hard data and institutional reports (BIS, ESMA, CFTC).

All content is educational and informational only – it does not constitute investment advice or a recommendation. Remember: leveraged trading (Forex/CFD) carries a high risk of rapid capital loss.