Anatomy of a currency pair: base currency, quote currency and quoting conventions

A currency pair expresses the price of the first currency in units of the second. EUR/USD = 1.0800 means USD 1.08 per euro. Start with a photographer’s EUR 2,400 payment to see which amount changes, what buying or selling the pair means and why the account currency is a separate question.

EUR/USD expresses the price of 1 EUR in USD. The rate of 1.0850 is a hypothetical example, not a current quote.

A payment in euros, a budget in dollars

A photographer has received EUR 2,400 for a commission and wants to convert it into dollars for a trip. In our simplified model, EUR/USD is 1.0800: each euro corresponds to USD 1.08. Multiplication gives 2,400 EUR × 1.0800 USD/EUR = USD 2,592.

If the same euros are converted at 1.1000, the amount is USD 2,640, or USD 48 more. The fee from the client has not increased: it remains EUR 2,400. What changed is its value in another currency. That distinction helps when reading an exchange-rate chart or budgeting an international payment.

Every price in this introductory model is hypothetical. We use one exchange price and exclude spreads, fees and taxes to isolate the units. An actual sale needs the provider’s buying price for euros and the terms for the full amount. CME’s explanation of quote conventions sets out the base/quote order.

The first currency is the unit being priced

In EUR/USD, EUR is the base currency and USD the quote currency. Read the slash as “priced in”: euros priced in dollars. The quotation refers to one euro; it does not limit the transaction to one euro. Write down the unit, USD per EUR, before choosing an operation.

If EUR/USD rises, one euro buys more dollars. The euro has appreciated against the dollar. That statement does not establish what happened against the pound, yen or a basket of currencies. Nor does a quotation above 1 prove that an economy is stronger: the size of the currency unit matters.

For our photographer, changing from EUR/USD to USD/EUR changes the question. The reciprocal of 1.0800 is approximately 0.925926 EUR per USD. To convert the euros using that notation, divide: 2,400 ÷ 0.925926 ≈ USD 2,592. Multiplying by both quotations would confuse two different units. With a two-sided quote, invert the opposite sides; the detailed reciprocal section below shows why.

Buying or selling a pair always has a direction

Buying EUR/USD means taking the EUR side against USD: in a deliverable exchange, you receive euros and give up dollars. Selling EUR/USD does the reverse. The photographer who exchanges existing euros for dollars is therefore selling EUR/USD, even though the everyday description “buying dollars” is also correct.

At a hypothetical price of 1.0800, buying EUR 1,200 corresponds to paying USD 1,296, before costs. On a linear EUR/USD CFD with the same EUR 1,200 notional, “buy” describes exposure to a rising euro against the dollar. The CFD does not by itself credit EUR 1,200 to a currency account or deliver dollars for the trip. Check the contract before treating a position as a currency balance.

When buying a pair, a helpful check is to finish the sentence: “I buy the first currency and sell the second.” You can apply it to USD/JPY, GBP/USD or EUR/GBP without memorising a separate direction for each symbol.

The account currency and the instrument specification answer different questions

A GBP-denominated trading account does not turn EUR/USD into EUR/GBP. The pair still describes EUR against USD. In a simple linear EUR/USD calculation, a rate difference multiplied by a euro notional produces a result in dollars; converting that result into GBP is a further operation, under the provider’s terms.

The three-letter codes identify currencies. They do not tell you the contract size, margin requirement, expiry or settlement method. ISO 4217 and a product specification therefore serve different purposes. Two instruments carrying a similar EUR/USD label may have different rights and costs.

Before the exercises, check three things: which currency is one unit of the quote, which currency you receive or gain exposure to, and which currency the final calculation uses. The full lesson develops ISO codes, conventions, futures quotations, position sizing and conversion into the account currency.

Put the explanation to work

Three exercises with worked answers

Every rate and offer in these exercises is hypothetical. Choose an answer before opening the worked explanation. The third exercise is optional.

1. How many dollars does the photographer receive?

The photographer converts EUR 2,400 at the single hypothetical price EUR/USD = 1.1200. Ignore spreads and all other costs. What is the dollar amount?

Show the answer and explanation

Answer A: USD 2,688. The amount in euros is fixed; each euro is exchanged for 1.12 dollars in this model. No trading profit or return on an account balance has been calculated.

  • A. Correct. EUR 2,400 × 1.1200 USD/EUR = USD 2,688. The euro units cancel.
  • B. The multiplication gives 2,688 in USD, the quote currency, rather than EUR.
  • C. Dividing by EUR/USD reverses the required operation. This price is dollars per euro.
  • D. USD 48 was the difference between the two earlier introductory scenarios, not the proceeds at 1.1200.
2. What does selling USD/JPY mean?

Use the currency order only. Which description matches the direction of a sale of USD/JPY?

Show the answer and explanation

Answer B. Identify USD as the first currency, then apply the word “sell”. In an actual exchange this means giving USD and receiving JPY; for a derivative it describes the exposure, subject to its specification.

  • A. That is the direction of buying USD/JPY. A sale reverses it.
  • B. Correct. USD is the base currency, so selling the pair means selling USD against JPY. The product determines whether currencies are delivered.
  • C. A currency pair expresses one currency against another. Selling the pair does not mean selling both sides.
  • D. Account denomination does not replace either currency in the quoted pair.
3. Optional: does the reciprocal fall by the same percentage?

In a separate single-price model, EUR/USD rises from 1.1000 to 1.2100, an increase of 10%. What happens to USD/EUR? Exclude bid/ask and costs.

Show the answer and explanation

Answer C: a fall of approximately 9.09%. Initially USD/EUR = 1 ÷ 1.1000 ≈ 0.909091. Finally it is 1 ÷ 1.2100 ≈ 0.826446. The proportional change is (1 ÷ 1.10 − 1) × 100% ≈ −9.09%. Opposite quotations need not show equal percentage moves.

  • A. Inverting the quotation reverses the direction. The reciprocal falls when the original positive rate rises.
  • B. The percentage base also changes: 1 ÷ 1.10 is approximately 0.909091, a decline of 9.09%, rather than 10%.
  • C. Correct. USD/EUR moves from about 0.909091 to 0.826446. Their ratio is 1 ÷ 1.10, so the decline is about 9.09%.
  • D. The same relationship expressed in reverse still changes. Only the notation, not the underlying exchange relationship, has been inverted.

Explore the details

From the basic calculation to market conventions

The photographer’s payment establishes the units and direction. The following sections extend those ideas to ISO codes, quoting conventions, real product specifications, account-currency conversion and BIS statistics. The numerical examples in the detailed sections are separate models with their own assumptions.

1. Anatomy of a currency pair

1.1. Base currency and quote currency

The photographer’s payment used a currency pair as a conversion relationship. For a product specification, make one further distinction: the same EUR/USD relationship can underlie a deliverable exchange or a derivative without currency delivery. The notation identifies the two currencies and the price direction; the agreement identifies the rights.

Base currency means the first currency, to the left of the slash: EUR in EUR/USD. Its one-unit quotation does not set the transaction size. Documentation may call this currency 1 (CCY1); the number identifies its place in the pair, not greater importance.

Quote currency, also called counter currency or currency 2 (CCY2), is the second currency: USD in EUR/USD. Both currencies are assets. Calling the first a “commodity” and the second its “price” is a reading aid, not a product description or settlement rule.

A quote of EUR/USD = 1.0850 reads: you pay 1.0850 dollars for one euro. If the rate rises, for example to 1.0950, the euro has strengthened against the dollar — more dollars are needed for the same euro. If it falls, the euro has weakened against the dollar. The qualification “against the other currency in the pair” is not pedantry: the EUR/USD rate alone does not tell you whether the euro has strengthened against all currencies or the dollar has weakened against all of them.

A universal rule for reading an exchange rate

The rate of pair X/Y expresses the price of one unit of currency X in units of currency Y. This identifies the unit of the exchange rate; the transaction price is taken from the appropriate bid/ask side. The currency on the left is the base, and the one on the right is the quote. This logic determines how to interpret an exchange rate move and the direction of every position.

1.2. What the exchange rate actually tells us

EUR/USD = 1.08 does not mean that the euro is “strong”. It means that the exchange relationship at that moment is 1 EUR = 1.08 USD — and a single number may be a mid-rate or reference rate; the actual transaction price depends on the bid or ask side (section 1.3). The exchange rate is a relative price: it changes in fractions of a second, responding to interest rates, macroeconomic data and capital flows.

The nominal exchange rate level is not an assessment of the economy's condition. USD/CHF = 0.88 means 0.88 CHF per 1 USD, while USD/JPY = 152 means 152 JPY per 1 USD. The second number is larger because the currency unit has a different scale. It does not mean that the dollar is “152 times stronger”. We identify appreciation or depreciation by comparing rates over time and always naming the other currency. The Reserve Bank of Australia (RBA) distinguishes a bilateral exchange rate from a rate weighted against a basket of currencies: they answer different questions.

Exchange rate units and redenomination

Redenomination changes the unit in which amounts are expressed. In France, from 1960, one new franc equalled 100 old francs; in Poland, from 1995, one new zloty equalled 10,000 old zlotys; and in Turkey, from 2005, one new lira equalled one million old lira. These changes are confirmed by Monnaie de Paris, Poland's redenomination act and the TCMB. In a purely hypothetical 100:1 redenomination of the yen, a rate of 152 JPY per USD would become 1.52 new units per USD, and 15,200 JPY would become 152 new units. The dollar value of both amounts would remain the same: 100 USD. Removing zeros alone does not create purchasing power.

1.3. Every transaction has two sides

Every currency transaction is simultaneously a purchase of one currency and a sale of the other. Buying EUR/USD means buying euros and selling dollars; selling EUR/USD reverses this. There is no one-sided currency transaction.

Bid and Ask
The platform shows two prices: bid (the price at which the market buys the base currency from you — the price at which you sell) and ask (the price at which the market sells it to you — the price at which you buy). Example: EUR/USD 1.0842 / 1.0844. The difference is the spread; its size, variability and role as a cost are covered in the article on quotes and the article on costs.
CFD: economic exposure, not physical delivery

On a typical retail CFD account, buying EUR/USD does not create a euro balance and a dollar loan in your account. The contract gives economic exposure that is long EUR against USD, with cash settlement of the difference. The exposure breakdown in the next section is a way of describing this exposure. In the linear model presented, the relationship between profit or loss and the exchange rate change is the same as for appropriately matched currency cash flows, but delivery, financing and the relationship with the counterparty are different. Regulatory definitions of a CFD are set out in ESMA Decision (EU) 2018/796 (Article 1) and the UK FCA Handbook (COBS 22.5) (implemented in Poland via point 2 of KNF Decision DAS.456.2.2019); the product structure is explored in the lesson on the retail market.

The two sides explain a phenomenon that surprises readers encountering Bank for International Settlements (BIS) statistics for the first time: currency shares add up to 200%, not 100%. According to the final BIS data for April 2025, the dollar was on one side of approximately 89.1% of all transactions, the euro 28.5%, the yen 16.9% and sterling 10.2% (followed by, among others, the renminbi at 8.6% and the franc at 6.3%). The four largest shares sum to approximately 145%; the shares of all currencies add up to 200%, because every transaction involves exactly two currencies and both are counted.

These two sides have another consequence that is easy to forget: in economic terms, there is no “cash on the sidelines”. After closing all positions, a trader no longer has exposure from FX instruments (nothing uses margin or remains an open position on the platform), but still holds funds in the account currency, whose international purchasing power moves with that currency's exchange rates. A trader with a euro or sterling account who “has no position” still, economically, holds EUR or GBP.

The two sides help identify shared exposure. Long EUR/USD means long EUR and short USD. Short USD/CHF means short USD and long CHF. Both positions therefore have short exposure to the dollar. If the dollar strengthens against both the euro and the franc, both position directions are unfavourable before costs. The positions are not identical, however: the other currencies, notionals and size of the moves may differ. Two symbols alone do not establish diversification or equal sensitivity to USD; you need to know the position sizes. The direction itself can be read without calculating lots.

1.4. Position exposure in numbers

Everything above can be expressed in a single calculation. Assume an illustrative instrument specification in which 1 lot equals 100,000 units of the base currency (a typical value, but always determined by the broker's symbol specification). You buy 1 lot of EUR/USD at 1.0850:

Exposure after opening a long position of 1 lot EUR/USD @ 1.0850
SideCurrencyAmount
Positive exposure to the baseEUR+100,000 EUR
Negative exposure to the quoteUSD−108,500 USD (100,000 × 1.0850)
Buying and selling the same pair at 1.0850 — a hypothetical notional of 100,000 EUR
DirectionEUR — baseUSD — quoteWhat a rise in EUR/USD means
Buy EUR/USD+100,000 EUR−108,500 USDa favourable price move before costs
Sell EUR/USD−100,000 EUR+108,500 USDan unfavourable price move before costs

The signs describe the economic equivalent of the exposure. On a CFD account, they are not entries for actual balances or loans.

Now the rate rises to 1.0950. The short exposure is unchanged: its economic equivalent is still 108,500 USD (on a CFD account, no actual debt is created — this is a measure of exposure, not an obligation to pay). Your 100,000 EUR is now worth 100,000 × 1.0950 = 109,500 USD. Profit or loss is the same under both approaches:

109,500 − 108,500 = 100,000 × (1.0950 − 1.0850) = +1,000 USD

In this model, profit or loss arises in USD, the quote currency. A rate move of 0.0100 USD per EUR changes the value of a 100,000 EUR notional by 1,000 USD. If the rate falls from 1.0850 to 1.0750, the long position loses 1,000 USD and the short gains 1,000 USD before costs. This notation lets you check the units: EUR × USD/EUR = USD. It does not yet tell you how much money the broker reserves or the result after financing and commissions. Position size is covered in the lesson on lots (or test notional sizes and results with the lot value calculator and profit/loss calculator), while conversion into a non-USD account currency (such as EUR, GBP or PLN) is covered in section 8.

Anatomy of EUR/USD: EUR is the base, USD is the quote; a hypothetical price of 1.1250 USD per 1 EUR.
1 EUR is the unit of quotation, not a limit on transaction size. The rate of 1.1250 is a separate hypothetical example.

1.5. The euro can rise against the dollar and fall against the yen (or pound)

The statement “the euro rose” is incomplete until you identify the comparison currency. The hypothetical model below illustrates this across three major currencies. The rates in each row refer to the same moment; bid/ask and costs are excluded. EUR/JPY equals EUR/USD multiplied by USD/JPY, so all three relationships are consistent.

Consistent rates at two points in time: three currencies, different directions of change
TimeEUR/USD (USD per EUR)USD/JPY (JPY per USD)EUR/JPY (JPY per EUR)
T01.1000150.00165.00
T11.1220145.50163.251
Change from T0+2.00%−3.00%−1.06%

The euro strengthened against the dollar by 2.00%, while weakening against the yen by 1.06%. There is no contradiction: the dollar lost more against the yen than the euro gained against the dollar. The percentage changes multiply rather than simply add: 1.02 × 0.97 = 0.9894 (−1.06%). The exact same arithmetic applies to EUR/USD, USD/PLN and EUR/PLN, or EUR/GBP: a reader who sees only a rising EUR/USD does not yet know how the euro moved against another currency. Deriving executable cross rates from both sides of the quote is covered in lesson 2.3.

2. Currency codes — the ISO 4217 standard

2.1. How a currency code is constructed

The three-character codes USD, EUR, GBP, JPY and PLN are defined by ISO 4217. The standard also contains numeric codes and information on currency subdivisions. ISO describes the rules for constructing them, while updates and lists are maintained by SIX Financial Information as the maintenance agency on behalf of SNV. An edition number such as ISO 4217:2015 does not mean that the currency list stopped changing in 2015. The list is updated following monetary changes.

For many national currencies, the following rule applies: the first two letters are the country code under ISO 3166, and the third is usually the first letter of the currency's English name:

ISO 4217 currency codes
ISO 3166 code (country)+ Currency letter= ISO 4217 codeCurrency
US (United States)D (Dollar)USDUS dollar
GB (United Kingdom)P (Pound)GBPpound sterling
JP (Japan)Y (Yen)JPYJapanese yen
PL (Poland)N (Nowy złoty — new zloty)PLNPolish zloty
CH (Confoederatio Helvetica)F (Franc)CHFSwiss franc
AU (Australia)D (Dollar)AUDAustralian dollar
CA (Canada)D (Dollar)CADCanadian dollar
CN (China)Y (Yuan)CNYChinese yuan
Insight — Confoederatio Helvetica

The abbreviation CH refers to the Latin name Confoederatio Helvetica. In the code CHF, the letter F stands for franc. The country code and currency code should not be treated as two versions of the same identifier: CH identifies the country, while CHF identifies the currency, which may be used in transactions far beyond Switzerland. ISO gives CHF as an example of the relationship between the two standards.

2.2. Exceptions to the rule

The “country code + currency letter” rule has exceptions. These include currencies shared by several countries, designations for metals and units of account, and codes changed following a reform of the currency unit.

EUR — the euro area is not a country, so it has no ISO 3166 code. The code does not correspond to a single state. Following Bulgaria's adoption of the euro on 1 January 2026, the euro area comprises 21 countries, as confirmed by the ECB announcement. The use of the same currency by several countries does not create several separate EUR codes.

Codes starting with X are used when a code does not refer to a single state — for both metals and actual circulating currencies of monetary unions:

ISO codes for metals and supranational units
CodeMeaningContext
XAUgold (aurum)troy ounce — quoted as XAU/USD
XAGsilver (argentum)troy ounce — XAG/USD
XDRSpecial Drawing Rights (SDR)IMF reserve asset and unit of account; not a circulating currency
XOFCFA franc (UEMOA)currency of the West African monetary union
XAFCFA franc (CEMAC)currency of the Central African monetary union

Codes and names: the current SIX list. The IMF explains that the SDR is not a currency, although eligible holders can exchange this asset for currencies. An ISO code alone does not guarantee the availability of a retail FX instrument.

XAU/USD is not a currency pair in the strict sense

Gold has a code in the ISO list, but remains a metal. XAU/USD is the price of gold expressed in dollars, not a relationship between two currencies issued by central banks. The standard meaning of the XAU unit does not determine the size of a position described as “1 lot” by a broker. A gold contract specification may differ from a currency instrument specification. Using the same symbol field on a platform does not mean the product or contract unit is the same; the details are shown in the lesson on lots.

A change in the currency unit may require a new code. Following Poland's redenomination in 1995, PLN distinguishes the new zloty from PLZ: 10,000 old zlotys equalled one new zloty. Mexico's MXN replaced MXP following the 1993 reform; Banco de México gives a ratio of 1,000:1. Reading historical data therefore requires the code, date and unit. Simply replacing the old code with the new one in a file can create an apparently enormous exchange rate move, even though only the scale of the notation changed.

Zimbabwe: the reform date and the code change date

The SIX historical list contains the codes ZWD, ZWN, ZWR and ZWL, while the current list includes ZWG for Zimbabwe Gold. This was not a simple sequence of five uninterrupted periods of circulation: the codes and reforms had separate dates, and the country also used foreign currencies. One important detail: the introduction of ZiG in April 2024 and the inclusion of ZWG in ISO are two different events. ISO amendment number 177 introduced ZWG from 25 June 2024; ZWL moved to the historical list from September. Earlier reforms were associated with hyperinflation: Hanke and Kwok estimated monthly inflation in November 2008 at approximately 79.6 billion percent. This is the authors' estimate, not a daily official release from the statistical office.

2.3. Numeric codes and “minor units”

Alongside alphabetic codes, ISO 4217 assigns currencies three-digit numeric codes (USD = 840, EUR = 978, PLN = 985, JPY = 392), used in settlement systems and banking messages. They are useful in automated data processing and wherever the designation should not depend on the alphabet or language.

The ISO list contains a minor unit field describing the subdivisions of a currency. The current list shows 2 for USD, EUR and PLN, 0 for JPY and 3 for KWD. These cases help distinguish the currency unit from the number of digits displayed by the platform:

The numeric code and minor unit are not FX tick parameters
CurrencyISO numeric codeMinor unit in the listWhat this means for payments
USD84021 dollar = 100 cents
EUR97821 euro = 100 cents
PLN98521 zloty = 100 groszy
JPY3920no decimal subdivision in this field
KWD41431 dinar = 1,000 fils

Source: SIX, the current ISO 4217 list. This field does not set the contract price precision, minimum price increment or value of a point of movement.

Beware a common mistake: minor units describe currency subdivisions in payments, not FX quoting precision. ISO lists zero minor-unit decimal places for the yen, yet it is quoted to two or three decimal places in the FX market (USD/JPY = 152.503). The number of decimal places in a quote depends on the order of magnitude of the exchange rate and the instrument specification, not ISO. What a pip and a pipette are, and how much one point of movement is worth for different pairs, are covered in a separate article on units of measure.

3. Currency order in a pair — a convention that was never legislated

3.1. Where the currency order comes from

EUR/USD, GBP/USD and USD/JPY have established quoting directions. They cannot be derived from GDP comparisons, the exchange rate level or the list of ISO codes. The market uses accepted conventions that make prices easier to compare. CME's materials on FX conventions illustrate both OTC practice and the different quoting directions of some futures. The convention is a feature of the quoting method, not a measure of a currency's importance.

The historical role of London and sterling provides background to the market's development, described in the lesson on Forex history. GBP/USD should not, however, be described as a quote “in pounds”: in this notation, the price is expressed in dollars. Sterling is the base currency. The modern convention can be read without reconstructing the gold parity or the historical settlement practices of London dealers; no rule makes the first currency stronger.

The Australian and New Zealand dollars are also usually written before the US dollar: AUD/USD and NZD/USD. The US dollar, by contrast, comes first in USD/CAD, USD/CHF, USD/JPY and USD/PLN. This set is enough to explain the basic exception to the intuition that “the dollar always comes first”. This practice is neither a legal requirement nor a ranking of currencies by importance. Rather than transferring the direction from one pair to another, check the first currency in each notation.

For the euro, a specific institutional document is available: in its announcement of 8 July 1998, the ECB adopted publication of reference exchange rates in the form “1 euro = a number of foreign currency units”. The document specifies how these rates are published. It is neither a rule requiring every platform worldwide to use a particular currency order nor evidence that the euro must be the base in every possible product.

Typical OTC spot currency order: EUR, GBP, AUD, NZD, USD, CAD, CHF, JPY. The earlier currency is usually the base.
This is a notation convention, not a ranking of currency strength. On other markets, such as futures, the quoting direction may be reversed.

3.2. Typical conventions for major currencies

For the most popular currencies, the following order has become established in the OTC market (a currency higher in the order is the base in a pair with a currency lower in the order):

EUR → GBP → AUD → NZD → USD → CAD → CHF → JPY

A practical illustration of this convention (not proof — the order is custom, not law): the market quotes CAD/CHF, CAD/JPY and CHF/JPY, so CAD comes before CHF and CHF before JPY in the convention. The reciprocal notations are mathematically correct but are not the dominant convention for these pairs. Beyond these eight currencies, the rule becomes less consistent: the order in emerging-market currency pairs may vary by market and platform.

The order does not reflect the strength of economies — AUD comes before USD in the customary notation, which does not imply Australia's economic superiority. The dollar sits in the middle: it is the quote currency (EUR/USD, GBP/USD, AUD/USD, NZD/USD) and the base currency (USD/CAD, USD/CHF, USD/JPY, USD/PLN). A “rise in the rate” therefore sometimes means a stronger dollar and sometimes a weaker one, a major source of mistakes. This is a customary convention, not a rule without exceptions: for pairs of emerging-market (EM) currencies (PLN/CZK, PLN/HUF), the order may vary by platform, and outside the spot market there are other conventions, as discussed below.

3.3. Consequences: four position combinations

The currency order determines the sign of profit or loss. The view that “the dollar will strengthen” is expressed by buying USD/JPY, but by selling EUR/USD, because the dollar is the quote currency in that pair. The same currency and the same view require two opposite clicks. Anyone who memorises a direction rather than the convention will open one of these positions the wrong way round. The four possible combinations are:

Four combinations: position direction × exchange rate move (using EUR/USD)
PositionExposure to EUR (base)Exposure to USD (quote)Rate risesRate falls
Long (buy the pair)longshortprofitloss
Short (sell the pair)shortlonglossprofit

The table shows the sign of profit or loss from the exchange rate change before costs; a small favourable move may not cover transaction costs. Long = long the base and short the quote — always both sides at once.

An example of a direction error: the expectation is that “the franc will weaken against the dollar”. Buying USD/CHF expresses that view: long USD and short CHF. Selling USD/CHF gives the opposite exposure — long CHF against USD. With an assumed notional of 100,000 USD, a rise of 0.0050 CHF per USD gives +500 CHF on the long and −500 CHF on the short before costs. The difference between the results is 1,000 CHF. Direction and units are what matter in this example; conversion of the result into your account currency (USD, EUR, GBP, PLN or another currency) and point-based units are explored in the lesson on pips and ticks and can be tested in the pip value calculator.

Moving between markets is a separate source of mistakes, because exchange-traded futures are sometimes quoted inversely to spot:

The Swiss franc across different instruments and contexts
ContextNotationBase currency
OTC spot (interbank)USD/CHFUSD
CME futuresCHF/USD (contract 6S)CHF
Retail FX board / bank rate table (e.g. CHF/PLN, bank card desk)1 CHF = x domestic unitsCHF

CME explicitly warns in its educational materials that some futures contracts are quoted inversely to the OTC convention (the exchange has historically quoted in “American terms”). CME describes this difference in conventions. A short position in the 6S contract (CHF/USD) and “Sell” on USD/CHF give opposite exposures to the franc — copying the Buy/Sell command alone reverses the direction of exposure. This does not mean that spot and futures have identical prices or equal notionals: a futures contract has a specified size and maturity. CME also explains the difference between spot and futures prices.

4. American terms and European terms

In the American terms convention, the exchange rate expresses the number of US dollars per unit of foreign currency — the foreign currency is the base currency and the dollar is the quote currency. GBP/USD (1.26 — “1.26 dollars per pound”), EUR/USD, AUD/USD and NZD/USD are quoted this way.

The European terms convention is the reverse: the amount of foreign currency per US dollar — the dollar is the base currency. USD/JPY (152.50), USD/CHF and USD/PLN are quoted this way. The name is historical and misleading: it does not indicate where trading takes place or where the currency originates. EUR/USD is quoted in American terms even though the euro is a European currency. Both names refer solely to the position of USD in the notation.

The terminology direct/indirect quote is similarly tricky: it depends on the observer’s domestic currency. EUR/USD is a direct quote for an observer in the United States (the number of US dollars per euro), but an indirect quote for an observer in the euro area (the number of foreign currency units per euro). Similarly, USD/CAD is a direct quote in Canada, while EUR/PLN = 4.28 is a direct quote in Poland. If the pair does not contain the observer’s domestic currency at all — such as EUR/USD for someone in Japan or the UK — the distinction ceases to be useful. That is why instrument documentation uses the unambiguous terms base currency / quote currency — and this article does the same.

Conventions at a glance

American terms: the dollar is the quote currency (GBP/USD, EUR/USD). European terms: the dollar is the base currency (USD/JPY, USD/PLN). “Direct/indirect” depends on the observer’s country — “base/quote” is less ambiguous.

American terms: USD is the quote currency; European terms: USD is the base currency.
The names describe the position of USD in the pair, not the country where trading takes place. The exchange rates shown are hypothetical.

5. Notation conventions — the slash, Bloomberg and CME

In the interbank market and in texts about currencies, you will encounter the notation XXX/YYY: EUR/USD, USD/PLN. In trading systems, the slash may be omitted — EURUSD — or a data provider’s identifier may be used. Bloomberg uses the Curncy asset class, while Reuters/Refinitiv/LSEG data use their own RIC codes; CME materials also use the futures symbols 6E (euro), 6J (yen), 6B (pound) and 6S (franc). A provider’s ticker is not a currency-pair standard in its own right. ISO 4217 specifies the currency code, not the syntax of an instrument symbol. EURUSD, EUR/USD and EUR-USD usually describe the same relationship, but the identifier must be interpreted using the documentation for the particular system.

Market convention versus the broker’s instrument specifications

A broker’s instrument specification contains several fields that beginners often read as one: the symbol (EURUSD and EURUSD.pro may be different instruments with different terms), the base currency, the profit currency — in which the position’s profit or loss is calculated; usually the quote currency — and the margin currency. Platforms such as MT5 store these as separate symbol properties. There is also the account currency: if it differs from the profit or margin currency, the amounts are converted according to the platform’s rules. Before comparing two brokers’ terms, make sure you are comparing the same fields.

Did you know? “Big figure” and “handle”

In voice trading, dealers omit the part of the rate that “everyone knows”: with EUR/USD at 1.0842/1.0844, the quote is simply “42–44”, and the omitted “1.08” is the big figure (or handle). When the rate moves from 1.0999 to 1.1001, it is described as “breaking the big figure”. In electronic systems, the execution price must be unambiguous in the context of the instrument and the full quote. Abbreviated notation on screen or in conversation requires knowledge of the omitted part of the price; “42–44” alone is not enough to reconstruct it.

EUR/USD, Bloomberg EURUSD Curncy, LSEG EUR= and CME 6E on Globex and EC on ClearPort; BGN is the quote source.
ISO 4217 specifies currency codes. Provider identifiers and futures symbols require documentation for the particular system; spot, CFDs and futures have different terms.

5.1. The same pair, different products and currency fields

With a symbol such as EURUSD.pro, you may recognise familiar currencies and still not know the contract’s most important terms. The suffix may distinguish an account type or offering, but it has no single meaning shared by all brokers. MetaQuotes documentation distinguishes the base currency, profit currency and currency used to calculate margin. The account currency is another separate parameter. This distinction helps you read the specification; it does not require writing code.

What the pair name tells you and what you need to check in the product documentation
FieldWhat it describesExample or limit of the information
EUR/USD pairthe price relationship: USD per 1 EURdoes not specify the lot size or settlement date
EURUSD.pro symbolan identifier in a particular systemthe suffix has no universal meaning
Base currencythe first currency in the FX relationshipEUR in the established EUR/USD convention
Profit currencythe currency in which profit and loss are calculatedusually USD for EUR/USD in a standard linear FX CFD
Margin currencythe currency used to calculate the required collateralshould not be inferred from the account currency
Account currencythe currency used to display the balance and settle account transactionsmay be EUR, GBP, AUD or PLN for the EUR/USD pair
Product typecurrency exchange, a CFD, futures or another contractdetermines, among other things, delivery, timing and the settlement method

In a currency exchange involving EUR/USD, you can receive euros and pay dollars on the agreed date. A CFD settles the difference in the contract’s value. Futures also have exchange-defined specifications for each contract series and an expiry date. Charts may show similar movements, but the pair symbol alone is not enough to transfer position size, order side or settlement rules from one product to another. In subsequent lessons, we will cover units of price movement, lots and margin separately.

A currency code and a market-segment designation may also look similar. ISO specifies CNY for the renminbi; CNH is a market designation for the offshore segment, not a separate ISO code for a second currency. The distinction between the two markets and the scope of the BIS aggregate are explained in the lesson on pair classification.

6. Market nicknames

Cable means GBP/USD. It is a nickname, not a separate currency symbol or contract type. Other names referring to individual currencies have also become established in market language: Aussie for AUD, Kiwi for NZD and Swissie for CHF. These are nicknames, not specification fields. They do not replace identifying both currencies, the direction of the position and the product type. An unambiguous symbol remains the most reliable choice when placing an order or comparing data.

Loonie means the Canadian dollar and, depending on context, also the USD/CAD pair. The Royal Canadian Mint documents how the name derives from the loon on the one-dollar coin introduced in 1987. Chunnel is sometimes used for EUR/GBP and Fiber for EUR/USD, but the scope of such names is not standardised. “The loonie is rising” may therefore refer to CAD, while a falling USD/CAD is precisely its appreciation against USD. The pair code removes this ambiguity.

7. The reciprocal rate and a change of perspective

Reversing the notation does not create a new currency: USD/EUR describes the same relationship as EUR/USD, with the units exchanged. The short example below shows what changing the order entails. The full derivation of reciprocal and cross rates, selecting the correct side and comparison with a direct quote belong in lesson 2.3 on quotations.

Mathematically, reversing a pair is straightforward: if EUR/USD ≈ 1.0842 (a single indicative figure), then USD/EUR = 1 / 1.0842 ≈ 0.9223. It is the same information viewed from the other side. In the OTC market, however, the conventional order is used (EUR/USD, rather than USD/EUR) — it keeps data, pricing and communication consistent, while reversing the notation can help compare two conventions, such as a currency-exchange table and an exchange-traded instrument. The units and price sides must still be preserved.

With a two-way quote, however, you must invert both sides of the quote — the sides switch. The reciprocal bid comes from the original ask, and the reciprocal ask from the original bid:

Inverting the EUR/USD quote of 1.0842 / 1.0844
USD/EUR sideFormulaCalculationResult
bid1 / ask(EUR/USD)1 / 1.08440.92217
ask1 / bid(EUR/USD)1 / 1.08420.92234

Sanity check: bid < ask (0.92217 < 0.92234) — correct. Why? Buying dollars with euros (at the USD/EUR ask) is the same transaction as selling euros for dollars (at the EUR/USD bid) — the side you trade on must be consistent in both notations.

Reversing the rate also changes the comparison base: percentage changes are not symmetric when the rate is inverted. An increase in EUR/USD from 1.00 to 1.10 is +10%, but USD/EUR then falls from 1.00 to 0.90909 — a decline of 9.09%, not 10%. The discrepancy grows with larger moves, and one percentage must not be substituted for the other. This is a property of the reciprocal rate, separate from converting an account’s profit or loss into another currency.

Inverting the pair switches the price sidesEUR/USD: bid 1.0842, ask 1.0844. USD/EUR: bid 0.92217, ask 0.92234. The reciprocal bid is one divided by the ask, and the reciprocal ask is one divided by the bid.EUR/USD · USD per 1 EURbid1.0842ask1.0844bid0.92217ask0.922341 / xUSD/EUR · EUR per 1 USDCheck after inversion: bid < ask
Hypothetical quote. Lesson 2.3 develops the method and its application to cross rates.

8. Case study: account currency vs quote currency (EUR, GBP and PLN)

Because quote conventions are independent of account denomination, a trader in Frankfurt, London, Sydney or Warsaw often trades a pair whose quote currency differs from their deposit currency. Common European regional pairs such as EUR/PLN, USD/PLN, GBP/PLN and CHF/PLN also place PLN on the right as the quote currency — the reciprocal notation (PLN/EUR) can be calculated mathematically and may appear in informational tables, but the wholesale market follows the convention of placing PLN as quote.

On any standard quote, a rise means the base currency strengthens and the quote currency weakens. For example, a move in EUR/PLN from 4.28 to 4.35 means the euro has strengthened against the zloty (you pay more zlotys for one euro), while a move down to 4.20 means the zloty has strengthened. This logic can seem counterintuitive when viewing domestic rates: a “higher EUR/PLN rate” means a weaker zloty. For unhedged revenue in EUR, a higher rate increases PLN proceeds; for a liability in EUR, it increases PLN cost. The overall effect on a business also depends on cost currencies and hedging.

Whenever the account currency differs from the instrument’s quote currency, settlement introduces a third currency. Return to the exposure breakdown in section 1.4: a profit of +1,000 USD on EUR/USD. Depending on whether the trading account is denominated in EUR, GBP or PLN, that +1,000 USD profit is converted at the relevant conversion rate (illustrative rates):

The same profit of +1,000 USD in non-USD account currencies
Account currencyIllustrative conversion rate (scenarios)Result credited to account
EUR accountEUR/USD 1.0800 vs 1.1200+925.93 EUR vs +892.86 EUR (diff: 33.07 EUR)
GBP accountGBP/USD 1.2500 vs 1.3000+800.00 GBP vs +769.23 GBP (diff: 30.77 GBP)
PLN accountUSD/PLN 3.9700 vs 4.1000+3,970.00 PLN vs +4,100.00 PLN (diff: 130.00 PLN)

In every row, the trade itself earned exactly +1,000 USD in EUR/USD’s quote currency; the third currency enters solely at the profit/loss settlement stage. These figures use illustrative mid-rates and exclude conversion spreads or broker mark-ups; the exact timing and side (typically bid when selling a positive USD profit balance) are specified in the broker’s documentation. Compare pip-by-pip conversions in the pip value calculator and profit/loss calculator, or read the article on units of measurement.

Did you know? Central bank reference rates (ECB and NBP)

Central banks publish official reference rates rather than tradable dealer quotes. The European Central Bank (ECB) publishes euro foreign exchange reference rates around 16:00 CET based on a daily concertation procedure between central banks at 14:15 CET. Similarly, Narodowy Bank Polski (NBP), Poland’s central bank, publishes Table A of average exchange rates every business day between 11:45 and 12:15 local time (and Table B, covering additional currencies, generally on Wednesdays). Neither set is an official classification into majors and exotics, nor an executable rate: they serve tax calculations, accounting valuations and financial reporting, whereas executable rates depend on a bank or broker’s live bid/ask quotes.

The pair and the account currency

A EUR, GBP or PLN account does not add a third currency to the price formation of EUR/USD itself. In a standard linear contract, a move in EUR/USD first produces P&L in USD, which is then converted into the account currency. Fluctuations in EUR/USD, GBP/USD or USD/PLN affect only that second conversion step — they do not mean the broker opened two separate positions on your behalf. Always check your broker’s product specification for P&L conversion and margin-currency rules.

EUR/PLN = 4.28: EUR is the base currency and PLN the quote currency. NBP determines EUR/PLN as at 11:00 and publishes Table A on business days between 11:45 and 12:15 local time.
Example of a regional pair quotation (EUR/PLN = 4.28): a rise means the base currency strengthens and the quote currency weakens. Hypothetical rate; central bank reference rates are not offers to exchange currency.

9. The most traded currency pairs

According to the final BIS annex for April 2025, EUR/USD, USD/JPY, USD/CNY and GBP/USD led global turnover in spot and OTC derivatives combined. The renminbi pair’s rise to third place, ahead of the sterling pair, is one of the most significant shifts in the composition of turnover since the previous survey. The top ten also include USD/CAD, USD/CHF, AUD/USD, USD/HKD and USD/SGD, among others. Detailed figures for individual pairs are provided in the final BIS statistical annex and our interactive currency pair profiles, while the next article in this section explores the classification of pairs into majors, minors and exotics, together with the implications for liquidity and costs.

BIS 2025: EUR/USD 20.7%; USD/JPY 14.4%; USD/CNY 8.2%; GBP/USD 7.5%; USD/CAD 5.2%; AUD/USD 4.9%; USD/CHF 4.8%; USD/HKD 3.6%; USD/SGD 2.3%; USD/INR 1.9%.
Daily averages in April 2025; spot and OTC derivatives, on a net-net basis. Source: BIS, final annex published in June 2026. Shares are rounded to 0.1 percentage point.

Two observations matter for this article. First, every pair at the top of the ranking has the dollar on one side, illustrating the dollar’s role as the main vehicle currency. EUR/CNY appears in the BIS survey, but its turnover is much smaller than that of USD/CNY, which is consistent with the dollar’s intermediary role (although turnover data alone do not show the execution route of any particular transaction). Second, the notation of these pairs illustrates the order explained in section 3: EUR/USD, GBP/USD and AUD/USD are quoted in American terms (the dollar as the price), while USD/JPY, USD/CNY, USD/CAD, USD/CHF, USD/HKD and USD/SGD are quoted in European terms (the dollar as the commodity). The article on quotations discusses cross rates and their relationship with dollar pairs.

10. What a currency pair does NOT mean

Myth versus reality
Common mythThe reality
“I am buying euros”This may be understandable in conversation, but it does not define the full exposure unless you specify the currency exchanged for them. You buy euros with dollars (EUR/USD) or with zlotys (EUR/PLN) — these are different positions with different risks.
“The base currency is more important or stronger”The order is a historical convention. Placing AUD before USD is neither a ranking of economic strength nor an exchange rate forecast.
“The rate is rising, so both currencies are becoming more expensive”An exchange rate expresses a relationship: a rise in EUR/USD means that the euro is strengthening against the dollar — and, at the same time, that the dollar is weakening against the euro.
“A rate above 1.00 means a strong currency”The level of the rate is a matter of units. USD/JPY = 152 does not make the dollar “strong”, and GBP/USD = 1.26 does not make it “weak”.
“I only have a long position”Being long a pair means having long exposure to the base currency and short exposure to the quote currency; being short a pair means the reverse. The direction is specified relative to a particular pair.

11. Test your understanding

One exercise that tests everything this article teaches. USD/CAD = 1.3600 / 1.3602. You open a short position of 1 lot (assume an illustrative specification of 1 lot = 100,000 USD).

(a) Which currency are you selling, and how much of it?

You sell the base currency, US dollars: 100,000 USD (1 lot = 100,000 units of the base currency). At the same time, you buy the equivalent amount in Canadian dollars — a short position in USD/CAD is simultaneously short USD and long CAD.

(b) At which price do you enter?

You sell at the bid = 1.3600 (the market buys the base currency from you at the bid price). The economic equivalent of your long exposure in Canadian dollars is 100,000 × 1.3600 = 136,000 CAD — in a CFD account, this does not mean that you physically receive that amount.

(c) What is the hypothetical CAD/USD bid/ask quote?

The sides are swapped: bid(CAD/USD) = 1 / ask(USD/CAD) = 1 / 1.3602 = 0.73519; ask(CAD/USD) = 1 / bid(USD/CAD) = 1 / 1.3600 = 0.73529. Check: bid < ask — correct.

If you can identify both sides of the exposure and the correct side of the quote, you are reading the structure of a currency pair correctly. Apply the same transformation in the other direction: shorting 1 lot of USD/JPY (under the illustrative specification) means selling 100,000 USD and buying the equivalent amount in yen. Identifying these two amounts prepares you for the next lesson: reading bid/ask prices and calculating cross rates.

FAQ — frequently asked questions

What exactly am I buying when I buy EUR/USD?

Exposure to the relationship between the two currencies: long the euro and short the dollar. With an illustrative contract size of 100,000 units of the base currency, a 1-lot position at a rate of 1.0850 corresponds to economic exposure of +100,000 EUR / −108,500 USD. In a retail CFD account, there is no physical delivery of currencies — you obtain the economic equivalent of this exposure, settled through the difference in value, and your counterparty is the CFD provider, in practice the broker (see the article on the retail market for details).

Why is the zloty on the right in pairs with the euro and the dollar?

Because in standard market quotations, emerging market currencies are the quote currencies against EUR, USD, GBP or CHF — this is a customary convention, not a law. The reciprocal (PLN/EUR) can be calculated mathematically (by swapping the bid/ask sides — section 7), but the wholesale market quotes EUR/PLN.

Can I trade USD/EUR instead of EUR/USD?

You will usually encounter EUR/USD, but you need to check the platform’s offering for the availability and direction of the symbol. The reciprocal notation is mathematically valid. You can, however, reverse the direction of your position: a short position in EUR/USD gives exposure in the same direction as a hypothetical long position in USD/EUR. It is not literally “the same”, though: the notional amount would be measured in dollars rather than euros, and, as section 7 shows, the percentage changes of the two reciprocal quotations are not mirror images.

I am moving from CME contracts to the OTC market. Why does my short position in the Swiss franc work the other way round?

Because CME quotes the Swiss franc contract in American terms (CHF/USD, symbol 6S), whereas the OTC market quotes it the other way round (USD/CHF). A short position in 6S is a position against the franc; “Sell” on USD/CHF is a position against the dollar, which means in favour of the franc. Copying the direction from one market to the other reverses your exposure — before clicking, check which currency is the base currency in that notation.

Does a rate below 1.00 mean that the base currency is weak?

No — it is a matter of units, not value. USD/CHF = 0.88 only tells you that one dollar costs less than one franc. It is the change in the rate over time that tells you whether a currency has strengthened against the other, not whether its price exceeds 1.00. A currency basket index shows a broader relationship; for example, DXY measures the dollar against a specified basket and is not a universal index for every currency.

Sources and further reading

  1. ISO: ISO 4217 — Currency codes — Rules for alphabetic and numeric codes, minor units and maintenance of the list by SIX.
  2. SIX: current ISO 4217 list — Current codes and minor-unit fields; verified 15 November 2026.
  3. SIX: historical currency code list — PLZ, MXP and historical Zimbabwe codes; this is not a substitute for a chronology of banknote circulation.
  4. SIX: ISO 4217 amendment No. 177, 20 June 2024 — ZWG from 25 June 2024; ZWL moved to the historical list from September.
  5. BIS: final annex to the 2025 FX turnover survey, June 2026 — Table 1: global turnover and currency shares; Tables 3–4: currency pairs. Daily averages for April 2025, spot and OTC derivatives combined, on a net-net basis.
  6. CME: Understanding FX Quote Conventions — Base and quote currencies, American/European terms and the inverse quotation convention for CHF futures compared with spot.
  7. CME: Reconciling FX Spot and Futures Prices — The difference between the spot price and a contract with a specified maturity; reciprocal notation does not make the instruments identical.
  8. MetaQuotes: Base, quote, and margin currencies of the instrument — Separate base/profit/margin properties and prefixes and suffixes in broker symbols.
  9. ESMA: Decision (EU) 2018/796 of 22 May 2018 — EU-wide product intervention criteria for retail CFDs, defining the CFD contract and difference settlement (superseded locally by national measures such as Poland’s KNF Decision DAS.456.2.2019).
  10. UK FCA: COBS 22.5 Restrictions on the retail marketing, distribution and sale of CFDs — Permanent UK rules for retail currency CFDs, margin close-out and negative balance protection.
  11. KNF: Decision DAS.456.2.2019 of 1 August 2019 — Point 2: the CFD contract and settlement of the difference in value; national Polish implementation alongside EU framework.
  12. RBA: Exchange Rates and Their Measurement — Bilateral exchange rates, changes in relative prices and effective exchange rates against a basket.
  13. ECB: euro reference exchange rate convention, 8 July 1998 — Publication of rates in foreign currency units per 1 EUR; the announcement concerns ECB reference rates.
  14. ECB: Euro foreign exchange reference rates — Daily concertation at 14:15 CET and publication around 16:00 CET; reference rates for information and valuation rather than executable quotes.
  15. ECB: Bulgaria introduces the euro, 1 January 2026 — Bulgaria becomes the 21st euro area country.
  16. IMF: What is the SDR? — The SDR is a reserve asset and unit of account, not a currency; eligible holders can exchange it.
  17. Polish Act of 7 July 1994 on the redenomination of the zloty — Articles 2 and 12: the 10,000:1 conversion ratio and the reform’s entry into force on 1 January 1995.
  18. Monnaie de Paris: a 5,000-franc banknote overstamped as 50 francs — The French reform from 1 January 1960, with a 100:1 conversion ratio.
  19. TCMB: Our History — Removal of six zeros and the new lira from 1 January 2005.
  20. Banco de México: frequently asked questions — The new peso from 1 January 1993 and conversion of the old unit at 1,000:1.
  21. Hanke and Kwok (2009): On the Measurement of Zimbabwe’s Hyperinflation — The original paper by the authors of the monthly hyperinflation estimate; the figure of 79.6 billion percent is an estimate.
  22. NBP: information on exchange rate publication times — Publication schedules for Tables A and B; an official average exchange rate is not an offer to execute a transaction.
  23. Royal Canadian Mint: 1 dollar — Introduction of the coin in 1987 and the origin of the name loonie from the loon.
  24. Morgan Stanley: EUR/USD — identification of the underlying instrument — The issuer’s documentation references Bloomberg EUR Curncy; an example of an identifier class, not an ISO standard.
  25. LSEG Developer: on-demand extraction — IdentifierType Ric — The provider’s documentation uses the Ric identifier type; it is not an ISO currency code.

Your learning progress

Finished this lesson? Mark it yourself. Opening or scrolling a page never marks it complete.

Progress requires JavaScript and browser storage.

Saved only in this browser. No account or cross-device sync. Clearing site data can erase your progress.

Jarosław Wasiński

Editor-in-chief, ForexMechanics.com • Macro & FX analyst

Independent analyst and practitioner with over 20 years of experience in financial markets. Actively involved in Forex since 2007, with a focus on fundamental analysis, OTC market structure, and disciplined capital risk management.

  • Creator and editor-in-chief of MyBank.pl, providing reliable financial education since 2004.
  • Author of hundreds of in-depth market commentaries, structural analyses, and educational materials for traders and investors.
  • Advocate for market transparency, promoting education grounded in hard data and institutional reports (BIS, ESMA, CFTC).

All content is educational and informational only – it does not constitute investment advice or a recommendation. Remember: leveraged trading (Forex/CFD) carries a high risk of rapid capital loss.