Pips, pipettes, points and ticks — measuring exchange rate changes

A pip measures an exchange-rate difference. It does not tell you the money gained or lost, the number of quote updates or which prices an order may use. Start with one EUR/USD trade: the same move is 11.5 pips, 115 platform points and 23 permitted price increments. The difference becomes useful once each number has its own unit.

Pips and pipettes are conventional units of change. Point depends on symbol precision; tick size determines the permitted price grid. Quotes are hypothetical.

What changed between the two prices?

Imagine a hypothetical long EUR/USD CFD position of 0.24 lots. In this contract, 1 lot represents 100,000 EUR. It opens at an executed ask of 1.08620 USD/EUR and closes at an executed bid of 1.08735 USD/EUR. Both are actual execution prices within our model, not chart mid-prices.

The rate difference is 1.08735 − 1.08620 = 0.00115 USD/EUR. Keeping USD/EUR beside the number prevents the first common mistake: calling 0.00115 a dollar profit. It is the price change for one euro; the position contains many euros.

Our symbol has five decimal places, a pip size of 0.0001, a platform point of 0.00001 and a tick size of 0.00005 USD/EUR. These are explicit model parameters. A real specification may differ. MetaQuotes and cTrader document the relevant properties separately. [1], [3]

One difference, three denominators

Divide the same 0.00115 USD/EUR change by the relevant unit
QuestionCalculationAnswer
How many pips?0.00115 ÷ 0.000111.5 pips
How many platform points?0.00115 ÷ 0.00001115 points
How many tick-size increments?0.00115 ÷ 0.0000523 increments

None is an alternative estimate. Each correctly describes the same difference using another ruler. Here, one pip is 10 points, while one permitted increment is 5 points or half a pip.

23 increments does not mean 23 incoming ticks. A tick can mean a data update. One update may jump several price increments; updates may also change another field. The two execution prices alone cannot tell us how many events occurred between them. [2]

How does the move become USD 27.60?

First convert the lot quantity into base-currency units: 0.24 lots × 100,000 EUR/lot = 24,000 EUR. For this linear contract:

24,000 EUR × 0.00115 USD/EUR = USD 27.60.

The euros cancel, leaving dollars. A second route checks the result: 24,000 × 0.0001 = USD 2.40 per pip; then 11.5 pips × USD 2.40/pip = USD 27.60. Both routes agree before separately charged fees.

A short position with the same numerical opening and closing prices would have the opposite price result. In a real short trade, however, opening at the bid and closing at the ask gives its own execution prices. Do not reverse the sign of a long trade’s result and assume that reproduces a short trade’s net result.

Five decimal places do not make every price valid

Our model permits prices at integer multiples of 0.00005. Around the close, the grid is 1.08725 → 1.08730 → 1.08735 → 1.08740. A proposed price of 1.08733 has five decimal places but falls between two grid levels. Rounding it to five places changes nothing.

The adjacent permitted levels are 1.08730 and 1.08735. Which price could be used for a particular order also depends on its direction, trigger rules and minimum distance. We are checking the grid here, not prescribing how to move an order. The detailed grid example separates those checks.

The point describes platform precision; tick size describes the permitted increment. They happen to coincide on some symbols. This example deliberately makes them different, which is why substituting one for the other would give the wrong order-price test.

From dollars to a non-USD account (EUR, GBP or PLN): keep costs separate

Once the price result is calculated in USD (USD 27.60 gross, or USD 23.60 net after a separately charged total fee of USD 4.00 and before overnight financing), convert it only if your account is denominated in another currency. Assuming single conversion rates with no bid/ask spread or conversion fee:

  • EUR account (using the closing reference 1.08735 USD/EUR): 27.60 ÷ 1.08735 = 25.38 EUR gross, and 23.60 ÷ 1.08735 = 21.70 EUR net.
  • GBP account (at an assumed 1.2700 USD/GBP): 27.60 ÷ 1.2700 = 21.73 GBP gross, and 23.60 ÷ 1.2700 = 18.58 GBP net.
  • PLN account (at an assumed 3.9500 PLN/USD): 27.60 × 3.9500 = 109.02 PLN gross, and 23.60 × 3.9500 = 93.22 PLN net.

We used an executed ask to open and an executed bid to close, so their price difference already contains the effect of those execution prices. Subtracting a spread again would count it twice. A model built from mid-prices needs a different cost calculation. Actual account conversion can also use different rates for positive and negative amounts; the two-sided conversion example shows that distinction. [4]

What should travel with any pip figure?

Record the pair, pip size, opening and closing prices, direction, volume, contract size and account currency. To validate an order price, add the point, tick size and relevant order restrictions. A statement such as “11.5 pips” supplies only one part of that record.

The EUR/USD rule cannot be copied unchanged to USD/JPY, whose usual whole-pip convention is 0.01 JPY/USD, or to an inverse-quoted futures contract. Nor does a permitted order price guarantee execution there. The sections below develop the exceptions, conversion routes and exchange specifications without changing the logic: price difference first, units second, money third.

Try it yourself

Three exercises: units, money and an order-price check

The first two exercises check the main explanation; the third is optional. Choose an answer or open the worked solution, which also works without JavaScript.

1. Which three descriptions match the model price change?

EUR/USD changes from 1.08620 to 1.08735. Pip = 0.0001; point = 0.00001; tick size = 0.00005 USD/EUR.

Show the answer and explanation

Correct answer: 11.5 pips, 115 points and 23 increments. Subtract the prices first: 1.08735 − 1.08620 = 0.00115. Then divide by the three stated units.

115 pips confuses points with pips; 23 points exchanges the denominators. A count of price increments does not reveal the number of incoming data events.

Return to the explanation.

2. What is the price result in USD before separately charged fees?

The long position is 0.24 lots; contract size is 100,000 EUR per lot. Opening ask 1.08620; closing bid 1.08735 USD/EUR.

Show the answer and explanation

Correct answer: USD 27.60. Units = 0.24 × 100,000 = 24,000 EUR; result = 24,000 × (1.08735 − 1.08620) = USD 27.60.

USD 2.76 and USD 276.00 are decimal-place errors. 11.5 describes pips and cannot be labelled as dollars without a pip value. Spread is not deducted again from these execution prices.

Return to the explanation.

3. Optional: which proposed price belongs to the model grid?

The permitted prices are integer multiples of 0.00005 USD/EUR. All four choices have five decimal places. Check only the price grid, not other order conditions.

Show the answer and explanation

Correct answer: 1.08735. 1.08735 ÷ 0.00005 = 21,747, an integer. The three other ratios are not integers.

All four prices can be displayed to five places. Only one satisfies this grid. Minimum distance, order direction and execution remain separate checks.

Return to the explanation.

Explore the details

Go further: conventions, currency conversions and exchange contracts

The case above follows one five-digit symbol. The reference sections below explain yen pairs, conversion in both directions, platform properties, futures and percentage comparisons. Their other rates and volumes are separate hypothetical examples.

1. Comparing absolute and percentage moves

In the equity market, you might say: “Apple rose by $3.50” (or “a Warsaw-listed stock rose by 12 PLN”). In the bond market: “the yield fell by 15 basis points”. In Forex: “EUR/USD rose by 45 pips”.

“EUR/USD rose by 45 pips” abbreviates information about an exchange rate difference. With a pip size of 0.0001, it means a move of 0.0045 USD/EUR. It is useful to retain the opening and closing prices in the calculation: the shorthand alone does not give the rate level, percentage change or monetary result of a position. Global turnover does not determine the pip size.

Pip notation makes it convenient to compare changes in the same pair. For two pairs with a pip size of 0.0001, a 45-pip move means the same absolute difference of 0.0045, but not necessarily the same percentage, volatility or value in the account currency. A monetary comparison also requires the position size and conversion rate.

A pip is a conventional unit of exchange rate difference, rather than a percentage or always the smallest price increment. From a starting EUR/USD rate of 1.0800, a 45-pip move is 0.0045 / 1.0800 × 100% = 0.4167%. For USD/JPY at 152.00, with a pip size of 0.01, the same 45 pips is 0.45 / 152.00 × 100% = 0.2961%. Section 7 shows the consequence for comparing units.

Terminology in this article

We use six distinct concepts: pip — a conventional unit of exchange rate change; pipette — 1/10 of a pip; point — a unit of platform precision; tick — a data update event; tick size — a permitted price increment; tick value — the monetary value of that increment. In MT5, point and tick size have separate properties. A symbol property's tick value must be read in the context of the contract size and account currency, rather than treated as the value for your entire position.[1]

2. The pip — a foundation of Forex terminology

2.1. Definition and etymology

For EUR/USD, under the convention used here, 1 pip = 0.0001 USD/EUR. For pairs with JPY as the quote currency, we use 0.01 JPY per unit of base currency. This is the convention used in the examples, rather than a formula derived from the number of digits in the name or the digits setting alone. In cTrader specifications, the pip position and minimum price change can be checked separately.[3]

EUR/USD = 1.0842. A move to 1.0843 is 0.0001, or 1 pip. A move from 1.0842 → 1.0852 is 0.0010 = 10 pips, while 1.0842 → 1.0942 is 0.0100 = 100 pips. The highlighted digit in the first example must be the fourth decimal place: “2”, rather than the third, “4”.

You will encounter expansions of “pip” as “percentage in point” and “price interest point”. We do not derive instrument parameters from uncertain etymology. The calculation requires only an unambiguous pip size in the exchange rate's unit; an order also requires the tick-size grid. A historical story about the market moving from three to four digits does not replace the specification.

The pip definition covers the vast majority of conventionally quoted pairs: those denominated in dollars, euros, pounds, francs, Australian, Canadian and New Zealand dollars, as well as most emerging-market currencies (PLN, TRY, ZAR, MXN). Ultimately, however, the market convention and the broker's symbol specification determine it. Yen pairs are the systematic exception.

2.2. The exception: yen pairs

USD/JPY = 152.50. Here, a pip is not the fourth digit — it is the second. A move from 152.50 to 152.51 is 1 pip. A move from 152.50 to 153.50 is 100 pips.

Mathematically: 1 pip = 0.01 — one hundredth.

The second decimal place in USD/JPY is the convention for JPY as the quote currency. It is not an automatic consequence of the rate level or the number of decimal places on the screen. A symbol may have three decimal places: USD/JPY 152.501. The pip then remains 0.01, while the additional 0.001 is a pipette. Do not transfer this rule to a reciprocal JPY/USD instrument without checking its specification.

Under the traditional FX convention (a whole pip), 1 pip = 0.0001 for most pairs and 1 pip = 0.01 for yen pairs. The number of displayed decimal places depends on the broker (for example, 4/5 digits, or 2/3 for JPY), but does not change the definition of a whole pip — the additional digit is a pipette.

The yen exception concerns pairs in which the yen is the quote currency: USD/JPY, EUR/JPY, GBP/JPY, AUD/JPY, CAD/JPY, CHF/JPY. Under the standard convention, the pip is 0.01 for all of them, although, as always, the broker's symbol specification is decisive.

Gold, commodities and indices have their own specifications

Do not transfer “pip = 0.0001” to gold, indices or an arbitrary CFD. For these instruments, the price unit, contract size, tick size and profit calculation mode matter. “Point” may mean a different unit there from a point in MetaTrader. In MT5, open the symbol specification in Market Watch; in cTrader, its details are in the Active Symbol Panel.[2], [3]

Beyond the yen

For an unusual symbol or pair, do not infer the pip size from the appearance of the price alone. Two decimal places do not establish that the provider calls 0.01 a pip, while five do not guarantee a tick size of 0.00001. Record the instrument's parameters alongside the calculation. If the platform does not provide a pip position, state the convention used in the calculation rather than guessing it from digits.

In EUR/USD, a pip corresponds to the fourth decimal place; in USD/JPY, to the second. An additional place gives a pipette.
In EUR/USD, a pip corresponds to the fourth decimal place; in USD/JPY, to the second. An additional place gives a pipette.

2.3. A pip's monetary value — two cases

Knowing that a rate rose by 45 pips tells you the size of the move. To know how much you made or lost, you also need two things: the position size and how the quote currency relates to the account currency.

Position size (lots) is discussed in detail in the next article — here we assume an illustrative specification in which 1 lot = 100,000 units of base currency (a typical amount, but always determined by the symbol specification). One qualification applies throughout the calculation section: the examples concern a retail CFD on a currency pair — the position is economic exposure, rather than physical acquisition of currency (the distinction is explained in lesson 2.1); we treat the rates given as execution prices, excluding spread, commission and slippage.

The key distinction concerns the quote currency — the one on the right of the pair. A pip's value is always expressed in the quote currency first, then converted into the account currency if necessary.

Case 1: quote currency = account currency (for example, EUR/USD in a dollar account)

This is the simplest case. For EUR/USD, the quote currency is the dollar. If your account is denominated in dollars:

Value of 1 pip = position size × 0.0001 = 100,000 × 0.0001 = 10 USD

The same applies to GBP/USD, AUD/USD and NZD/USD — any pair where the dollar is the quote currency and your account is denominated in dollars. Always 10 USD for a standard lot, provided the account is in USD (or you are calculating the result in USD). Regardless of the pair's current exchange rate.

Case 2: quote currency ≠ account currency (for example, USD/CHF in a dollar account)

For USD/CHF, the quote currency is the franc. The value of 1 pip for 1 lot is:

100,000 × 0.0001 = 10 CHF

To convert it into dollars, divide by the current USD/CHF rate:

10 CHF ÷ 0.8850 = ~11.30 USD

For USD/JPY:

100,000 × 0.01 = 1,000 JPY

1,000 JPY ÷ 152.50 = ~6.56 USD

In the simple USD/JPY model, the pip value is a constant 1,000 JPY for a 100,000 USD position, but its USD equivalent depends on the conversion rate. Therefore, 1,000 / 152.50 gives a different number from 1,000 / 155.00. The model uses a single rate; actual settlement may require bid/ask, fees or a broker-specified conversion rule.

The general pip-value formula

For a pair with an established pip size:

Value of 1 pip (in quote currency) = position size × size of 1 pip

Where the size of 1 pip is 0.0001 for standard pairs or 0.01 for yen pairs — for unusual symbols, the instrument specification determines it.

With a contract size of 100,000 and a pip size of 0.0001, one lot gives 10 quote-currency units per pip. With a pip size of 0.01, it is 1,000 units — 1,000 JPY in the yen examples.

For 10,000 base-currency units (0.1 lot under that contract), a pip size of 0.0001 gives 1 quote-currency unit; a pip size of 0.01 gives 100 units.

For 1,000 base-currency units (0.01 lot), a pip size of 0.0001 gives 0.1 quote-currency units, while a pip size of 0.01 gives 10 units. Do not use “0.1” without specifying the pip size and currency.

If the quote currency ≠ account currency, the result must be converted — and the direction (multiplication or division) follows from the units, rather than one fixed rule:

Conversion direction determined by the units
Your result is in…Your account is in…Conversion rateOperationUnit check
USDEUREUR/USD (USD per EUR)divideUSD ÷ (USD/EUR) = EUR
GBPUSDGBP/USD (USD per GBP)multiplyGBP × (USD/GBP) = USD
CHFUSDUSD/CHF (CHF per USD)divideCHF ÷ (CHF/USD) = USD
JPYUSDUSD/JPY (JPY per USD)divideJPY ÷ (JPY/USD) = USD
USDPLNUSD/PLN (PLN per USD)multiplyUSD × (PLN/USD) = PLN
JPYPLNUSD/JPY and USD/PLNdivide, then multiplyJPY → USD → PLN

The conversion route need not go through USD. Direct GBP/PLN or EUR/GBP rates can convert a result in one operation. This depends on the broker's settlement rules — the existence of a rate does not mean it is the one the broker uses. The single rate in the table is a simplification; below we show positive and negative results separately using both sides of a two-way quote.

Two-sided conversion on a non-USD account: +10 USD and −10 USD need not be symmetric

Assume a hypothetical linear EUR/USD contract: 1 lot = 100,000 EUR, pip = 0.0001 USD/EUR. One pip is 10 USD. On a non-USD account (such as EUR, GBP or PLN), positive results are sold into the account currency while negative results require buying USD to cover the loss. For illustration, assume a simultaneous conversion quote of USD/PLN 3.9990/4.0010 (or symmetrically on an EUR account with EUR/USD at 1.0849/1.0851: +10 USD is sold at the EUR/USD ask of 1.0851 to yield +9.22 EUR, whereas −10 USD is covered at the EUR/USD bid of 1.0849 to debit −9.22 EUR before rounding differences). A broker may apply another documented method or fee; the table below does not pretend to be its specification.

Both sides of a model conversion of one pip
Result in USDConversion directionChange in PLN
+10 USDSelling USD: 10 × 3.9990+39.99 PLN
−10 USDBuying USD: 10 × 4.0010−40.01 PLN
Difference between absolute values40.01−39.990.02 PLN for this 1 pip

Using a common rate of 4.0000 gives 40.00 PLN in both directions. This is a valid model simplification, but not a reconstruction of the two-way quote. Therefore, the conversion price, direction and fee should accompany the result. Do not manually transfer 39.99 PLN from this table to every position and day.

JPY also requires division. For 1 lot of USD/JPY, a pip size of 0.01 gives 1,000 JPY. At a model rate of 155.00 JPY/USD, we obtain 1,000 JPY /(155.00 JPY/USD) = 6.4516129 USD. At a single USD/PLN rate of 4.0000, this is 25.8064516 PLN, or 25.81 PLN. The same 1,000 JPY gives 26.23 PLN at 152.50 and 25.00 PLN at 160.00. The conversion rate has changed, rather than the JPY amount per pip.

When settling an actual position, distinguish the pip's value “now” from the final conversion of the entire result. The OrderCalcProfit documentation describes estimating profit or loss in the account currency for given prices and volume.[4] Check final booking and fees in the account terms.

2.4. Formulas and a value matrix

The following table uses an explicit hypothetical specification: 1 lot = 100,000 base-currency units, with a pip size of 0.0001 except for JPY (0.01). USD conversions use the single rates listed below the table, without fees. This is a checking matrix, rather than a February 2026 offer or a universal specification for every symbol.

Hypothetical pip values for a 100,000-unit contract
PairRate (example)1 pip = Value in quote currency~Value in USD
EUR/USD1.08420.000110 USD10.00 USD
GBP/USD1.26500.000110 USD10.00 USD
AUD/USD0.65200.000110 USD10.00 USD
NZD/USD0.59500.000110 USD10.00 USD
USD/JPY152.500.011,000 JPY~6.56 USD
USD/CHF0.88500.000110 CHF~11.30 USD
USD/CAD1.37500.000110 CAD~7.27 USD
EUR/GBP0.85500.000110 GBP~12.65 USD
EUR/JPY165.800.011,000 JPY~6.56 USD
GBP/JPY193.500.011,000 JPY~6.56 USD
EUR/PLN4.28000.000110 PLN~2.52 USD
USD/PLN3.97500.000110 PLN~2.52 USD
USD/TRY36.500.000110 TRY~0.27 USD

Model rates: GBP/USD = 1.2650, USD/JPY = 152.50, USD/PLN = 3.9750, USD/TRY = 36.50; for USD/CHF and USD/CAD, the rates in the relevant rows were used. We do not attribute an actual quotation date to these numbers.

The table shows three relationships. For pairs with USD as the quote currency (EUR/USD, GBP/USD, AUD/USD, NZD/USD), the pip value is exactly 10 USD, regardless of the exchange rate. For pairs with USD as the base currency (USD/CHF, USD/CAD, USD/JPY), the dollar pip value changes with the rate. For exotic pairs (EUR/PLN, USD/TRY), a pip is worth much less in dollars — which does not mean it is less important to a trader whose account is denominated in zlotys or lira.

EUR/USD model: 1.00/0.10/0.01 lot gives 10/1/0.10 USD per pip, or 40/4/0.40 PLN at USD/PLN 4.0000.
Assumptions: 1 lot = 100,000 EUR, pip 0.0001 USD/EUR and a single hypothetical USD/PLN 4.0000 rate. Fees and conversion spread excluded.
A pip value is not a fee schedule.

If the result has already been calculated from actual opening and closing prices (ask and bid), the spread and slippage effects are included in those prices. Do not subtract them again. Account separately only for costs not yet included, such as commission, financing and conversion under the account terms. A model using one reference price needs different adjustments from a result taken from an execution report. The full calculation appears in lesson 2.8.

3. The pipette — the fifth decimal place

3.1. Where it came from and how to count it

An extra digit allows a fraction of a pip to be displayed without changing the definition of a whole pip. Instead of EUR/USD 1.0842/1.0844, or 2 pips, the model 1.08420/1.08435 shows a 1.5-pip spread. Display precision alone is not evidence of a lower cost or better execution, however; assessment requires both prices and the transaction terms.

This gave rise to the one-tenth-pip unit (a pipette, or fractional pip):

1 pipette = 0.00001 = 1/10 of a pip

In other words: 1 pip = 10 pipettes.

The same logic applies to yen pairs: a pipette is the third decimal place (0.001), while a pip remains the second (0.01). USD/JPY = 152.501 — the final 1 is a pipette.

For a standard EUR/USD lot, 1 pipette = 1 USD (versus 10 USD per pip). For a mini lot, it is 0.10 USD; for a micro lot, 0.01 USD.

3.2. Reading five-digit quotes

The number of decimal places is a property of a symbol configured on a particular server, rather than an immutable feature of a program's name. In MT5, it is available as digits. Two symbols on the same platform may have different precision, tick size and contract size.[1]

How do you read a five-digit quote?

EUR/USD = 1.08421

From the left: 1.08 is the “big figure” (the part of the rate that changes infrequently — dealers omit it in voice communication). 42 denotes pips. 1 is a pipette.

When a broker says “a spread of 1.3 pips”, it means 13 pipettes — formally correct, because 1.3 × 10 pipettes = 13 pipettes. In market practice, however, people still speak in pips and treat pipettes as fractions: “one point three” or “one three”, without adding the word “pipette”.

The key rule: regardless of how many digits you see on the screen, the pip is still the fourth decimal place (or the second for the yen). The fifth digit is a pipette — a fraction of a pip, rather than a new pip.

Why not six digits?

If the quote has six decimal places, such as 1.084215, the last digit corresponds to 0.000001 of the price. With a pip size of 0.0001, this is 0.01 pips. Do not automatically call this unit a pipette: a pipette is 0.1 pips. A price with more digits still requires a separate tick-size check. We do not attribute one precision level to every institutional platform.

A hypothetical symbol shows that the correct number of digits is not enough to make an order price valid.
A hypothetical symbol shows that the correct number of digits is not enough to make an order price valid.
Model: the price side matters more than the number of digits.

A short EUR/USD position has a stop at 1.0850. The bid is 1.0845 and the ask is 1.0853, giving an 8-pip spread. The ask has crossed the stop, even though the bid chart need not show that level. For a long position, the relevant closing side is the bid. Enabling the current ask line does not reconstruct its historical candles. Triggering and execution mechanics are explained in lesson 2.7.

PIP 0.0001 for EUR/USD = 10 USD / lot EUR/USD Market convention Fourth decimal place PIPETTE 0.00001 for EUR/USD = 1 USD / lot EUR/USD 1/10 of a pip Fifth decimal place TICK SIZE Minimum price increment 6E: 0.00005 → 6.25 USD Specification parameter of the exchange or platform
Pip, pipette and tick size — three different units. A pip is an OTC market convention, a pipette is 1/10 of a pip, and tick size is an instrument specification parameter (which differs between an exchange and a CFD broker).

4. Tick, tick size and point — technical parameters

4.1. A tick in the OTC spot market

In the market, “tick” has two different meanings, which should be distinguished because mixing them causes misunderstandings:

  • Tick as an event — the arrival of a new quote update. This is the platform usage (“tick-by-tick changes”, the MT5 NewTick event) and the sense in which “tick volume” is counted. One update may change the price by one minimum increment — or by many increments at once.
  • Tick size — the minimum permitted price increment of an instrument, a specification parameter. This is a broader concept than a pip and is not specific to Forex: stocks, bonds, futures and options have their own tick sizes.

In a common five-digit EUR/USD model, both point and tick size are 0.00001, but they are independent parameters. A move from 1.08420 → 1.08421 is then one tick-size increment and 0.1 pips. A data update may also move the price by several increments or change only one quote side. A tick as an event does not promise a change of exactly one minimum increment.

A third related concept is the point (platform point) — in MetaTrader and related platform terminology, a unit determined by the number of decimal places (the digits parameter) used to store the price; other platforms may use the word differently, so their documentation is decisive. For five-digit EUR/USD, a point is 0.00001 — a pipette, rather than a pip. A 12-point move in such a quote is 0.00012, or 1.2 pips. This distinction can be costly: someone who sets “stop loss = 30” in an automated strategy thinking in pips, while the platform interprets it as points, obtains a stop ten times tighter.

Symbol specifications — for MT4/MT5 users and EA developers

The platform maintains these parameters as separate symbol properties (in MT5: SYMBOL_POINT, SYMBOL_TRADE_TICK_SIZE, SYMBOL_TRADE_TICK_VALUE, SYMBOL_TRADE_CONTRACT_SIZE). An example five-digit EUR/USD specification:

digits = 5 · point = 0.00001 · tick size = 0.00001 · tick value ≈ 1 USD per 1 lot (with a USD account) · contract size = 100,000.

Tick value is the monetary value of a minimum price change. For a linear EUR/USD model with a contract size of 100,000 EUR and tick size of 0.00001 USD/EUR, one lot gives 1 USD/tick, while 0.1 lot gives 0.10 USD/tick. MT5 has separate properties for the increment value of profitable and losing positions. Read them in the context of the symbol and account currency; do not assume equality after conversion. OrderCalcProfit can estimate the result of a specified trade in the account currency.[1], [4]

Even a correctly formatted number may fall outside the permitted grid. When point = 0.01 and tick size = 0.05, prices every 0.01 can be displayed, but not every such level is a valid order price. Check the instrument rule rather than equating screen precision with trading precision. The model below also illustrates this with a five-digit FX price.

Market scenario: a gap around an economic data release.

In the model, the short position's execution price differs from its opening price by 0.0045 USD/EUR. With a pip size of 0.0001, this is 45 pips, regardless of whether the feed recorded 45, 450 or fewer updates along the way. A tick event does not measure exchange rate distance. A gap may skip intermediate prices, while a permitted tick size does not guarantee execution at every level. Stop-loss and slippage mechanics are developed in lesson 2.7.

Tick volume ≠ global turnover.

The MT5 Volumes indicator documentation distinguishes the number of price changes for Forex from actual traded volume for exchange-traded symbols, and lets you select the data type in the parameters. The update count of a specific FX feed is not the sum of executed trades across the OTC market. Check the indicator type and source before assigning it a monetary meaning.[9]

Five digits on the screen, but an increment larger than the point

A hypothetical linear EUR/USD symbol specification: digits = 5; point = 0.00001 USD/EUR; pip = 0.0001; tick size = 0.00005; contract size = 100,000 EUR. The model grid is anchored at multiples of the tick size. We are not claiming that every retail EUR/USD symbol is configured this way.

Separate checks of precision, increment and monetary value
ParameterConversionMeaning
1 tick size0.00005 / 0.00001 = 5 points0.5 pips
Tick value for 1 lot100,000 EUR × 0.00005 USD/EUR5 USD
Example grid prices1.08420 → 1.08425 → 1.08430Each successive increment is 5 points
Price 1.08423Has 5 decimal places, but is not a multiple of 0.00005Displayable, but outside the model grid

For a price of 1.08423, the neighbouring levels are 1.08420 and 1.08425. Ordinary rounding to five decimal places fixes nothing, because it leaves 1.08423 unchanged. The nearest level by distance is 1.08425, but the direction in which an order price should be adjusted depends on the order type. We do not promise that the server will always round it automatically; order rules are explained in lesson 2.7.

The distance trap: 12 points is 0.00012 = 1.2 pips. If the starting price lies on this model's grid, a 12-point shift does not end on the grid. The neighbouring permitted distances are 10 points (1 pip) and 15 points (1.5 pips). By contrast, with tick size = point = 0.00001, a 12-point shift is a valid multiple increment. Both specifications have the same point; the tick size changes.

The check should therefore have two parts: price difference / point describes points, while price difference / tick size describes the number of permitted increments. Only the second number needs to be checked for an integer value. The pip size provides a third, independent conversion. These three denominators cannot be used interchangeably.

4.2. A tick in exchange-traded futures (CME)

For exchange-traded futures, tick size is predefined by the contract specification and often differs from a “pip” as understood in the OTC market.

CME Globex contracts: size and price grid for regular outright trading
CME contractSymbolTick sizeTick valueContract size
Euro FX6E0.000056.25 USD125,000 EUR
Japanese Yen6J0.00000056.25 USD12,500,000 JPY
British Pound6B0.00016.25 USD62,500 GBP
E-micro EUR/USDM6E0.00011.25 USD12,500 EUR

For one Euro FX contract (6E), in regular outright trading on CME Globex, tick size is 0.00005 USD/EUR and contract size is 125,000 EUR. Their product is 6.25 USD/tick. A move of 0.0001, or one whole pip under the OTC EUR/USD convention, gives two ticks and 12.50 USD. Other protocols, calendar spreads or contract variants may have different grids, so a “CME” heading alone is not enough.[5], [8]

Watch the yen contract (6J): CME quotes it in the opposite direction to spot — the price is expressed in dollars per yen (JPY/USD orientation), hence the tiny tick size of 0.0000005. Transferring intuition directly from USD/JPY to 6J means reading the chart “upside down”.

Micro EUR/USD (M6E) has a contract size of 12,500 EUR and tick size of 0.0001 USD/EUR. Its tick value is 1.25 USD. The contract is 10 times smaller than 6E, but its tick value is 5 times smaller: the M6E tick size is twice as large. This is a concrete reason not to scale tick value solely by the ratio of contract sizes.[7]

6E, M6E and 6J tick values of 6.25 USD, 1.25 USD and 6.25 USD follow from contract size multiplied by price increment.
M6E has one-tenth the 6E contract size but one-fifth its tick value. 6J is quoted in USD per JPY, inverse to spot USD/JPY.
The same tick value does not mean the same exposure

For the yen contract 6J, within the same outright scope: 12,500,000 JPY × 0.0000005 USD/JPY = 6.25 USD. The quotation direction is opposite to spot USD/JPY. For British Pound 6B: 62,500 GBP × 0.0001 USD/GBP = 6.25 USD. The same value of 6.25 USD comes from different sizes and units; it does not establish equal exposure or an identical percentage move.[6], [8]

5. Pip, pipette, point and tick — comparing the differences

Six concepts describing price changes
UnitDefinitionValue for EUR/USDValue for USD/JPYUsage context
Pip Change in the fourth decimal place (second for the yen) 0.0001 0.01 A universal unit of market communication
Pipette 1/10 of a pip (fifth digit, third for the yen) 0.00001 0.001 Precision of broker quotes; fractional spreads
Point Platform unit (MetaTrader convention): 10^(−digits) 0.00001 (with 5 decimal places) = pipette 0.001 (with 3 decimal places) Symbol specification, EA code (_Point)
Tick (event) Quote update — — Tick volume, NewTick event
Tick size Minimum permitted price increment OTC: usually 0.00001; CME 6E: 0.00005 Depends on the instrument Instrument specification (exchange/broker)
Tick value Monetary value of 1 tick-size increment for the position 6E: 0.00005 → 6.25 USD CME 6J: 6.25 USD (inverse quotation: JPY/USD) Risk valuation for futures and in specifications

Pips and pipettes are market conventions — agreed units in which traders discuss exchange rate changes. Point, tick size and tick value are technical parameters of the specification, while a tick may simply be an event — the arrival of a new quote. These concepts overlap, but are not synonyms.

6. Step-by-step calculations

6.1. EUR/USD — a pair with USD as the quote currency

Scenario: you buy 1 lot of EUR/USD (100,000 EUR) at 1.0850. The rate rises to 1.0895. You close the position.

Step 1: How many pips?
1.0895 − 1.0850 = 0.0045 = 45 pips

Step 2: The pip value?
Quote currency = USD, with a USD account.
100,000 × 0.0001 = 10 USD/pip

Step 3: Profit?
45 × 10 = 450 USD

No conversion is needed here because the profit and account currencies match, rather than because EUR/USD is special. The same logic applies to any linear pair quoted in USD in a USD account. When the result requires conversion, the conversion rate may change. Fees and actual execution prices are still accounted for separately.

6.2. USD/JPY — a yen pair

Scenario: you buy 1 lot of USD/JPY (100,000 USD) at 152.00. The rate rises to 152.85. You close.

Step 1: How many pips?
152.85 − 152.00 = 0.85 = 85 pips (because pip = 0.01)

Step 2: The pip value?
Quote currency = JPY.
100,000 × 0.01 = 1,000 JPY/pip

Step 3: Profit in yen?
85 × 1,000 = 85,000 JPY

Step 4: Profit in dollars? (with a USD account)
85,000 ÷ 152.85 (the closing rate) = ~556 USD

The USD value of 1 pip changes with the rate, explaining the similar numbers in this article: at 152.00, a pip is worth ~6.58 USD; at 152.50 (as in the table in section 2.4), ~6.56 USD; and at 160, ~6.25 USD. This is a property of pairs with the dollar as the base currency, rather than an error.

PLN account variation — a model using single rates: 1,000 JPY / 152.85 × 3.9750 = 26.005888... PLN/pip, or 26.01 PLN/pip after rounding. Profit of 85,000 JPY / 152.85 = 556.100752... USD, then × 3.9750 = 2,210.50 PLN. We do not round 6.54236... USD/pip to 6.54 before the next multiplication. Premature rounding produces 26.00 PLN. The rates are hypothetical and exclude the conversion spread; actual settlement depends on the broker's rules.

6.3. USD/CHF — a pair with USD as the base currency

Scenario: you buy 1 lot of USD/CHF (100,000 USD) at 0.8850. The rate rises to 0.8895. You close.

Step 1: How many pips?
0.8895 − 0.8850 = 0.0045 = 45 pips

Step 2: The pip value?
Quote currency = CHF.
100,000 × 0.0001 = 10 CHF/pip

Step 3: Profit in francs?
45 × 10 = 450 CHF

Step 4: Profit in dollars?
450 ÷ 0.8895 = ~505.90 USD

This is the difference from X/USD pairs. For EUR/USD, 45 pips always means 450 USD. For USD/CHF, 45 pips means 450 CHF, or ~506 USD at the current rate. The result is not dramatically different, but it is not identical, and it changes with every rate movement.

6.4. EUR/PLN — an exotic pair in a Polish case study

Scenario: you buy 0.1 lot of EUR/PLN (10,000 EUR) at 4.2800. The rate rises to 4.3050. You close.

Step 1: How many pips?
4.3050 − 4.2800 = 0.0250 = 250 pips

Step 2: The pip value?
Quote currency = PLN. Position = 0.1 lot = 10,000 EUR.
10,000 × 0.0001 = 1 PLN/pip

Step 3: Profit in zlotys?
250 × 1 = 250 PLN

Step 4: Profit in dollars? (with a USD account)
250 PLN ÷ 3.9750 (the USD/PLN rate) = ~62.89 USD

The rule is simple: profit or loss is initially expressed in the quote currency. For EUR/PLN, the profit is in zlotys; for EUR/USD, in dollars; and for USD/JPY, in yen. Only then is it converted into the account currency, if that currency differs.

One final combination — a cross without the dollar in a zloty account. 1 lot of EUR/GBP (100,000 EUR) gives a pip value of 10 GBP. In a PLN account, convert the pounds according to the matrix in section 2.3: through the dollar — 10 GBP × 1.2650 (GBP/USD) = 12.65 USD, then 12.65 × 3.9750 (USD/PLN) = ~50.28 PLN per pip — or in one operation at a direct GBP/PLN rate, if the broker uses it. The rates are illustrative single prices; actual settlement uses the appropriate quote side.

250 pips sounds like a lot, but is “only” 0.58%

Starting from EUR/USD 1.0842, a 250-pip move = 0.0250 USD/EUR, or 2.3058%. For EUR/PLN at 4.2800, the same 250-pip description means 0.0250 PLN/EUR, or 0.5841%. The percentages and currencies differ. We do not call moves “typical” or “extreme” without an empirical sample and time horizon.

Faster calculations. The pip-value calculator calculates the value in your account currency (USD, EUR, GBP, PLN and others) for each pair and position size. You can also check contract exposure with the lot value calculator or model the full monetary outcome in the profit and loss calculator.

7. What pips tell you about money — and what they do not determine

A distance of 30 pips in EUR/USD, at a pip size of 0.0001, is 0.0030 USD/EUR. It does not change when volume rises from 0.01 to 1 lot. Its monetary value does change: with a contract size of 100,000 EUR, it is 3 USD or 300 USD before fees. The distance alone does not establish whether an order will execute at the assumed level or what proportion of capital the client commits.

Choosing the target exposure is discussed in lesson 2.5. A loss budget, stop loss, gap risk and portfolio rules belong to risk management; they do not follow from the pip definition. Here we check the multiplication of units: pip count × money per pip = model change in position value.

Pips also help compare costs, but only within the same pair. Comparing pip counts alone across pairs is misleading: a 0.2-pip EUR/USD spread looks “40 times narrower” than 8 pips in EUR/PLN, but converting to money for 1 lot gives 0.2 × 10 USD = 2 USD (≈ 8 PLN at 4.00 PLN/USD) versus 8 × 10 PLN = 80 PLN (≈ 20 USD at 4.00 PLN/USD) — a monetary ratio of approximately 10:1, rather than 40:1. A pip has different monetary weight across pairs, so compare costs in currency or percentages, rather than pips.

At the model USD/PLN rate of 4.0000, a 0.2-pip spread on 1 lot of EUR/USD means 2 USD (= 8 PLN), while 8 pips on 1 lot of EUR/PLN means 80 PLN (= 20 USD). The monetary ratio is 10, although the pip-count ratio is 40. This compares specific positions, rather than recommending a pair; a percentage of notional or volatility may give another picture. The full cost is described in lesson 2.8.

Percentage changes calculated from explicit starting rates; a unit check, rather than an ATR measurement.
Percentage changes calculated from explicit starting rates; a unit check, rather than an ATR measurement.

8. Greater precision: what changes in the calculation

An additional decimal place changes display precision, but need not change the pip, contract or minimum volume. These are separate parameters. To check a new symbol configuration, compare its specifications before and after the change. The chart's appearance alone does not establish that orders have a smaller permitted increment.

Example: symbol A has digits 4 and point 0.0001; symbol B has digits 5 and point 0.00001. Both use a pip size of 0.0001 and contract size of 100,000 EUR. A 0.0003 move is 3 pips in both, but 3 points in A and 30 points in B. The value of that move for 1 lot remains 30 USD if USD is the quote currency. Changing precision creates neither extra profit nor loss.

A fractional unit may have a tangible effect over repeated trades. In a hypothetical model of 150 complete round trips per month, each of 1 lot of EUR/USD, the difference in the total cost of one round trip is 0.4 pips = 4 USD. Therefore, 150 × 4 = 600 USD per month, or 7,200 USD per year with 12 identical months. We do not add the spread again for both legs: entering at the ask and exiting at the bid includes one full spread when the quote is unchanged. The model excludes other fees and does not establish any particular broker's cost.

More digits do not guarantee a smaller spread, available volume or an absence of slippage. In addition to the symbol specification, you need a full quote and execution report. Price mechanics are explained in lesson 2.3; only after this check can monetary results be compared.

A checking calculation without a ready-made pip value

In the EUR/GBP model, the position is 37,500 EUR, the pip size is 0.0001 GBP/EUR and the single GBP/PLN rate is 5.0200. The pip value is 37,500 EUR × 0.0001 GBP/EUR = 3.75 GBP, then 3.75 GBP × 5.0200 PLN/GBP = 18.825 PLN. A move of 0.0008 GBP/EUR means 8 pips. The entire model change is 8 × 18.825 = 150.60 PLN before fees.

An independent route checks the result: 37,500 EUR × 0.0008 GBP/EUR × 5.0200 PLN/GBP = 150.60 PLN. EUR and GBP cancel, leaving PLN. If the result instead contained GBP × PLN or EUR/PLN, the operation's direction would be wrong. Displaying 18.83 PLN/pip is convenient, but using it in 8 × 18.83 would give 150.64 PLN. We therefore rounded only the whole result, rather than each stage.

9. Check an execution record without mixing units

  1. Recreate the price difference. Use the recorded opening and closing sides, then check its sign against the position direction.
  2. Write the denominator. State whether the difference is divided by pip size, point or tick size; never leave the unit implicit.
  3. Rebuild the monetary result independently. Compare units × price difference with pip count × value per pip, retaining precision until the final amount.
  4. Reconcile conversion and charges. Identify the conversion rate, quote side and fees. Do not deduct costs already included in execution prices again.
  5. Separate arithmetic from execution quality. A matching calculation does not prove that an order obtained the best available price, or that a planned stop would have executed without a gap.

FAQ — pip, point and tick

What is the difference between a pip and a pipette?

Under the EUR/USD convention, a pip is 0.0001 USD/EUR and a pipette is 0.00001, or 1/10 of a pip. For USD/JPY in these examples, they are 0.01 and 0.001 JPY/USD respectively. The additional digit does not change a whole pip.

Does a point always mean a pipette?

No. For five-digit EUR/USD in MetaTrader, point is usually 0.00001 and equals a pipette, but with four decimal places it is 0.0001. The symbol property is decisive, while other platforms may use “point” differently.

Can tick size be larger than point?

Yes. In a hypothetical specification with digits 5, point 0.00001 and tick size 0.00005, the minimum increment is 5 points. A price of 1.08423 has the correct number of decimal places, but does not lie on the assumed grid.

How much is one EUR/USD pip worth in a non-USD account (EUR, GBP or PLN)?

It depends on the volume, contract and conversion rate. In the 1-lot (100,000 EUR) model, 1 pip equals 10 USD/pip. Converting at single example rates gives ~9.22 EUR/pip (at EUR/USD 1.0850), ~7.91 GBP/pip (at GBP/USD 1.2650), or 40 PLN/pip (at USD/PLN 4.0000; in the two-sided 3.9990/4.0010 bid/ask model, a positive result settles at 39.99 PLN and covering a negative result costs 40.01 PLN).

Why does a USD/JPY pip have a variable USD value?

For a 100,000 USD position, a pip size of 0.01 gives 1,000 JPY. Convert that amount using the rate in JPY per USD: at 155.00, it is 1,000/155 = 6.4516 USD. The JPY amount per pip stays constant, while the USD conversion rate changes.

Does tick volume represent turnover across the entire Forex market?

No. A tick as a quote update need not be a trade. The update count of a particular feed is not global OTC volume. A price may move by many tick-size increments in one event.

Sources and how they are used

  1. MetaQuotes — Symbol Properties — Separate digits, point, spread, tick size, tick value, contract size and currency parameters; different calculation modes. Accessed: 15 November 2026.
  2. MetaTrader 5 — Market Watch — Symbol specifications and provider-defined parameters. Accessed: 15 November 2026.
  3. cTrader — Active Symbol Panel — Pip position, minimum change, lot size and volume limits as separate information. Accessed: 15 November 2026.
  4. MetaQuotes — OrderCalcProfit — An estimate of profit or loss in the account currency for a given side, prices and volume. Accessed: 15 November 2026.
  5. CME — Euro FX Contract Specifications — 6E: 125,000 EUR; CME Globex outright tick of 0.00005 USD/EUR and 6.25 USD. Accessed: 15 November 2026.
  6. CME — Japanese Yen Contract Specifications — 6J: 12,500,000 JPY; price unit: USD per JPY; the spot symbol has the inverse orientation; an outright tick of 0.0000005 USD/JPY and 6.25 USD. Accessed: 15 November 2026.
  7. CME — Micro FX Futures — M6E: 12,500 EUR, tick of 0.0001 USD/EUR and 1.25 USD. Accessed: 15 November 2026.
  8. CME — SER9641, FX Link rule amendments, December 2025 — Parameter table for 6E, 6J and 6B; 6B: 62,500 GBP × 0.0001 USD/GBP = 6.25 USD. Accessed: 15 November 2026.
  9. MetaTrader 5 — Volumes — The volume type depends on the symbol and settings. Accessed: 15 November 2026.

Exchange specifications concern the stated contracts and type of trading; all conversion rates in the models are hypothetical. The calculations are neither market quotes nor the specification of a particular CFD account.

Your learning progress

Finished this lesson? Mark it yourself. Opening or scrolling a page never marks it complete.

Progress requires JavaScript and browser storage.

Saved only in this browser. No account or cross-device sync. Clearing site data can erase your progress.

Jarosław Wasiński

Editor-in-chief, ForexMechanics.com • Macro & FX analyst

Independent analyst and practitioner with over 20 years of experience in financial markets. Actively involved in Forex since 2007, with a focus on fundamental analysis, OTC market structure, and disciplined capital risk management.

  • Creator and editor-in-chief of MyBank.pl, providing reliable financial education since 2004.
  • Author of hundreds of in-depth market commentaries, structural analyses, and educational materials for traders and investors.
  • Advocate for market transparency, promoting education grounded in hard data and institutional reports (BIS, ESMA, CFTC).

All content is educational and informational only – it does not constitute investment advice or a recommendation. Remember: leveraged trading (Forex/CFD) carries a high risk of rapid capital loss.