FX quotations, bid/ask and cross rates — how to read Forex prices

Bid is the price at which the provider buys the base currency from you; ask is the price at which it sells that currency to you. The difference is the spread. Follow a EUR 3,000 exchange to choose the right side, compare the full debit and work through a two-step conversion using bid and ask.

Illustrative EUR/USD bid/ask quote and a cross rate calculated through USD. The 2-pip spread is a hypothetical example, not a live price.

One euro amount, two different prices

A buyer holds Canadian dollars (CAD) and wants to obtain EUR 3,000. A hypothetical provider quotes EUR/CAD 1.4800 / 1.5000, in CAD per euro. Both prices are stated from the provider’s perspective. Its bid of 1.4800 buys euros from clients; its ask of 1.5000 sells euros to them. The buyer wants euros, so the relevant price is 1.5000.

Reading the two sides for EUR 3,000; no additional fees
Client’s actionApplicable sideCalculationCAD paid or received
Buy EUR 3,000Ask 1.50003,000 × 1.5000Pay CAD 4,500
Sell EUR 3,000Bid 1.48003,000 × 1.4800Receive CAD 4,440

To avoid reversing the sides, name what the provider does with the base currency: “it buys my euros” or “it sells me euros”. The everyday word “buy” is ambiguous until you specify who buys what. CME’s quote-convention lesson explains the currency order on which this reading depends.

The spread is a price difference, not a second invoice

Here the spread is 1.5000 − 1.4800 = 0.0200 CAD per EUR. If the buyer purchases EUR 3,000 and immediately sells the entire amount back while both prices remain unchanged, the loss is CAD 60: 4,500 paid minus 4,440 received. That is one complete bid/ask gap for this unchanged-price round trip, before additional charges. Do not subtract the same gap again as if it were another fee.

The midpoint is (1.4800 + 1.5000) ÷ 2 = 1.4900. Multiplying EUR 3,000 by that midpoint gives CAD 4,470, but the provider has not offered to sell euros at that price. Relative to this midpoint, the purchase is CAD 30 higher and the immediate sale CAD 30 lower. Those are two comparisons with a reference, not two extra debits.

A buy-and-sell model isolates the spread. It does not mean that every real transaction ends with the same loss: prices can move, amounts can differ, and an actual payment may involve only the purchase. Commissions, transfer fees and financing follow their own terms.

A better ask can still produce a larger debit

The buyer compares a second provider. A keeps the ask of 1.5000 and charges no additional fee. B offers 1.4900, with a CAD 40 exchange fee. Both confirm EUR 3,000 on the same delivery terms and there are no other charges in this model.

A costs 3,000 × 1.5000 = CAD 4,500. B costs 3,000 × 1.4900 + 40 = CAD 4,510. B’s better ask saves CAD 30 on the currency but its fee is CAD 40, so A is CAD 10 cheaper. If B changes the fee, repeat the calculation: the earlier winner need not remain cheaper.

For a payment, compare the final debit and the currency actually delivered. For a trading position, also establish how opening, closing and any time-based charges are calculated. The FX Global Code discusses clear disclosure of dealing roles and transaction handling in the wholesale market; its scope is not a substitute for a retail product agreement.

A cross rate is calculated by following the actual exchange direction

For a separate model, suppose the buyer can obtain euros in two fully available steps: EUR/USD is 1.1000 / 1.1020 and USD/CAD is 1.3500 / 1.3520. The prices are simultaneous, remain executable for every amount needed below and have no additional fees. First buy the required dollars with CAD at the USD/CAD ask; then buy euros with those dollars at the EUR/USD ask.

EUR 3,000 requires 3,000 × 1.1020 = USD 3,306. Those dollars cost 3,306 × 1.3520 = CAD 4,469.71 (exact: 4,469.712 CAD). The synthetic EUR/CAD ask is therefore 1.1020 × 1.3520 = 1.489904 CAD per EUR. The units check the route: (USD/EUR) × (CAD/USD) = CAD/EUR.

Selling euros through the reverse route uses both bids: 1.1000 × 1.3500 = 1.485000. Thus this hypothetical synthetic bid/ask is 1.485000 / 1.489904. You cannot buy euros at the synthetic bid merely because it is lower. Nor does multiplying two midpoints show an executable purchase price.

The arithmetic does not guarantee access to either leg. Different times, unavailable amounts, extra fees, rounding and a failed second leg can change the result. The detailed sections below cover division-based crosses (including CAD/JPY and PLN/CAD), reciprocal bid/ask, execution and both directions of a triangular-arbitrage test.

Put the explanation to work

Three exercises with worked answers

Every rate and offer in these exercises is hypothetical. Choose an answer before opening the worked explanation. The third exercise is optional.

1. What is the immediate round-trip difference?

Buy EUR 3,000 at the ask of 1.5000, then immediately sell the same euros at the bid of 1.4800. Both prices stay unchanged; there are no other charges. What is the loss in CAD?

Show the answer and explanation

Answer B: CAD 60. The relevant comparison is the actual purchase debit against the actual sale credit. No additional spread fee is added after those cash flows have been calculated.

  • A. CAD 30 compares one side with the midpoint. The complete buy-and-sell difference covers the full bid/ask gap.
  • B. Correct. CAD 4,500 paid − CAD 4,440 received = CAD 60, equal to 3,000 × 0.0200.
  • C. That counts the complete bid/ask gap twice. The two actual cash flows already incorporate it once.
  • D. An unchanged quote can still have two different sides. Buying at ask and selling at bid creates the difference.
2. Does the lower fee change which offer is cheaper?

A sells EUR 3,000 at 1.5000 with no fee. B sells at 1.4900, but now reduces its fee from CAD 40 to CAD 20. The whole amount and delivery terms remain the same. Which answer is correct?

Show the answer and explanation

Answer C. B’s total is 3,000 × 1.4900 + 20 = CAD 4,490. This is a new scenario: copying the winner from the CAD 40 fee example would miss the change in terms.

  • A. A’s absence of a fee is not enough to decide. B’s currency-price saving is now larger than its reduced fee.
  • B. A costs CAD 4,500; B costs 4,470 + 20 = CAD 4,490.
  • C. Correct. A costs CAD 4,500 and B costs CAD 4,490. After the fee reduction, B is CAD 10 cheaper than A.
  • D. CAD 4,470 is B’s currency-only price. Its CAD 20 fee must also be paid.
3. Optional: which prices fund the euro purchase through USD?

Use the separate two-step model: EUR/USD 1.1000 / 1.1020 and USD/CAD 1.3500 / 1.3520. All prices remain executable for the required amounts, with no fees and results rounded to two decimal places. How many CAD are needed to obtain EUR 3,000?

Show the answer and explanation

Answer B: CAD 4,469.71. The route needs 3,000 × 1.1020 = USD 3,306; financing that purchase takes 3,306 × 1.3520 = 4,469.712 CAD (CAD 4,469.71 rounded to cents). This conclusion relies on the explicit availability, timing and cost assumptions in the question.

  • A. Both bids describe selling EUR through USD, not buying EUR with CAD.
  • B. Correct. Buy USD 3,306 at 1.3520, then EUR 3,000 at 1.1020: total CAD 4,469.71 (exact 4,469.712).
  • C. Two midpoints produce a reference calculation, not the offered purchase sides. Their rounded result is not an available offer here.
  • D. The direct quote and the synthetic route are separate hypothetical offers. The direct ask does not determine the other route’s prices.

Explore the details

Quotes in full: reversals, cross rates and execution

The buyer’s exchange establishes who buys, who sells and how the money flows. Continue for direct and indirect quotations, dealer shorthand, cross rates calculated by multiplication or division, rounding, last look, chart prices and stop-order execution.

1. How to read an FX quote

1.1. What an exchange rate actually tells you

The buyer’s example used CAD per euro. The following EUR/USD examples use dollars per euro: 1.0850 means USD 1.085 per EUR. Keep the unit visible when moving between the tables. The currency-pair lesson covers base and quote currencies in detail.

Two numbers appear on your screen: 1.0842 and 1.0844. Their average is the mid: (1.0842 + 1.0844) ÷ 2 = 1.0843 — a reference price displayed by some financial information services. The same exchange rate therefore exists in three layers: an indicative rate (1.0843 on an information website), a full quote (1.0842/1.0844) and an execution price (you buy at 1.0844 and sell at 1.0842). The mid is not a guaranteed offer — some institutional mechanisms may match a trade close to the mid, but a retail trader should not assume that this price is available to them.

1.2. Direct and indirect quotation

Direct quotation expresses one unit of foreign currency in domestic currency. For an observer in the United States, EUR/USD 1.0850 is a direct quote (1.0850 USD per 1 EUR), whereas for someone in the euro area that same pair is an indirect quote. Similarly, for an observer whose domestic currency is PLN, EUR/PLN 4.3000 means 4.3000 PLN per 1 EUR (direct), while PLN/EUR ≈ 0.232558 is indirect. The labels therefore depend on the domestic currency chosen — they never change the sides of the transaction: in every pair, the client buys the first currency at the ask and sells it at the bid.

1.3. Market conventions — which currency comes first

The market uses established symbol orders, such as EUR/USD and USD/JPY. This is a convention, not a prohibition on calculating the reciprocal relationship. American terms and European terms refer to the position of USD in the pair, rather than the trader's nationality. CME also discusses differences in quotation direction between futures and spot.[1]

You do not need to reconstruct a pair's history to read its rate. Simply write down the unit of the number: USD/EUR for the EUR/USD symbol, or JPY/USD for USD/JPY. The slash in the price unit denotes a fraction, whereas the slash in the pair name orders the symbols. This distinction prevents errors when multiplying exchange rates.

USD as the quote currency: EUR/USD, GBP/USD, AUD/USD and NZD/USD. The rate tells you how many USD correspond to one unit of the first currency. It does not imply that the first currency is more important or always has a higher exchange rate.

Currencies “below” the dollar (the dollar is the base currency): USD/JPY, USD/CHF, USD/CAD, USD/PLN, USD/TRY. You pay x yen/francs/Canadian dollars/zlotys for one dollar.

When EUR/USD rises from 1.08 to 1.10 USD/EUR, the euro strengthens against the dollar. When USD/JPY rises from 150 to 155 JPY/USD, the dollar strengthens against the yen. The same chart direction describes a different base currency. Write down both units before calculating a cross rate — the instrument name and the economic direction of the position are separate pieces of information.

Notation conventions versus symbol availability

GBP/USD and EUR/USD are conventionally written with the dollar on the right. USD/CHF and USD/JPY place the dollar on the left. A reciprocal rate can be calculated for each relationship, but should not be equated with a separate instrument available from a broker.

Model exchange of 10,000 EUR at bid 1.0842 and ask 1.0844: sale proceeds 10,842 USD and repurchase cost 10,844 USD.
With unchanged EUR/USD 1.0842/1.0844, a full round trip on 10,000 EUR incurs 2 USD in spread. Fees and slippage excluded.

2. Bid and ask — two prices, one pair

2.1. The mechanism: who buys and who sells

The introductory currency pair quote had two sides. The detailed rules below concern such two-way quotations: bid buys the base currency from the client and ask, also called offer, sells it. A single chart or indicative number need not show both sides.

Bid — the price at which the dealer (market maker) is willing to buy the base currency from you. If you want to sell euros in EUR/USD, you receive the bid price.

Ask (offer) — the price at which the dealer is willing to sell you the base currency. Want to buy euros? You pay the ask. Remember the perspective: bid and ask are described from the dealer's side — for you, the bid is the selling price and the ask is the buying price.

In a normal two-way quote, the bid does not exceed the ask. The spread may be positive or zero. A negative ask − bid result requires you to check the time, source and data type; an aggregate may combine prices that are not simultaneously executable for one client. This does not automatically imply arbitrage, a malfunction or a broker's right to cancel a trade. Such rules depend on the specific agreement and execution policy.

A concrete example: EUR/USD 1.0842 / 1.0844.

The client's buying and selling direction at the bid and ask
You want to...PriceWhat happens
Buy euros (open a long)Ask: 1.0844You pay 1.0844 USD for each euro
Sell euros (open a short)Bid: 1.0842You receive 1.0842 USD for each euro

If you buy euros at 1.0844 and immediately sell at 1.0842, the difference is 0.0002 — or 2 pips. This is the spread: an immediate transaction cost incurred before the exchange rate has even moved. Be careful when calculating the round-trip cost: buying at the ask and closing at the bid means paying the spread once (the ask − bid difference), rather than separately on entry and exit.

2.2. The spread — a cost embedded in the price

Spread = ask − bid. The difference is measured in quote currency per unit of base currency. For 1.0842/1.0844, it is 0.0002 USD/EUR. With a pip convention of 0.0001 USD/EUR, this gives 2 pips. Calculate the spread from the current two sides of the same quote, rather than independent rates from two websites.

Buying at an ask of 1.0844 and immediately closing at an unchanged bid of 1.0842 produces a price loss equal to the spread. A 10,000 EUR position gives 10,000 EUR × (−0.0002 USD/EUR) = −2 USD. This is one full spread for that round trip. If you calculate the result from actual entry and exit prices, this component is already included in the rate difference — do not subtract it again.

Across different account currencies, a 1-pip spread on a 0.1-lot (10,000 EUR) EUR/USD position starts as $1.00 USD over the complete round trip — equivalent to roughly €0.92 on a EUR account, £0.79 on a GBP account, or 4 PLN on a PLN account at illustrative rates — see the article on units of measurement or test live conversions in the pip value calculator.

The spread is a component of the price. It is not automatically a commission or the broker's pure profit; the quoted price alone does not reveal how much covers liquidity costs, risk or markup. Commission and the full transaction cost are explained in lesson 2.8 and modelled in the trading costs calculator. Here we mainly need the spread to invert and combine quotes correctly.

Which prices a backtest contains

A backtest based on a single price does not automatically reproduce bid and ask transactions. The data should identify the price type and time; assessing execution also requires requested and executed prices. Comparing a candle alone with an order confirmation may overlook the other side of the quote.

Who is on the other side?

For a CFD, the contractual counterparty is specified in the product documentation. Any external hedge placed by the provider is a separate transaction and does not automatically make the client a counterparty to a bank in the interbank market. The labels ECN, STP and A-book alone determine neither this relationship nor the cost. The structure is described in the article on execution models.

2.3. What affects the width of the spread

Liquidity and amount. A price for a small amount may be available only at the first level. A larger order requires further offers or a separate request. Comparing EUR/USD with EUR/PLN solely by the number of pips ignores their different units and notionals; pair characteristics are covered in lesson 2.2.

Time. When comparing quotes, record the full timestamp and time zone. Two valid prices from different seconds do not form one common quote. Trading activity hours and session calendars belong in the section on trading hours; the time alone does not guarantee a narrow spread.

Volatility. When prices move quickly, the provider may change the spread or available notional, or withdraw the quote. Not every spread increase has the same cause. A price record can establish changes in bid and ask; assessing the execution mechanism requires documentation and a request history. A wide quote alone proves neither fraud nor the absence of provider responsibility.

Execution terms. Check the notional, quote validity, credit restrictions and order acceptance method. There is no single mandatory size for an “interbank quote”. EBS data account for credit relationships, but even the displayed amount does not guarantee that a request will be filled in full.[4]

Why quotation precision does not determine the spread

More digits allow a smaller difference to be displayed, but do not ensure it in every quote. EUR/USD 1.08420/1.08435 has a spread of 0.00015, or 1.5 pips. The fifth digit describes precision; the actual width is still calculated as ask − bid. Point and tick size are separate parameters — see lesson 2.4.

Hypothetical quotes with the same midpoint and different widths; not measurements of hours or sessions.
Hypothetical quotes with the same midpoint and different widths; not measurements of hours or sessions.

The following table is solely an arithmetic check. It is not a measurement of Bloomberg or EBS spreads, or a retail offering, and does not indicate the “typical” cost of any pair.

Checking the units: the number of pips from two prices
PairHypothetical bid / askMidPrice differenceSpread in pips
EUR/USD1.08425 / 1.084351.084300.00010 USD/EUR1.0 (pip = 0.0001)
EUR/JPY166.30 / 166.36166.330.06 JPY/EUR6.0 (pip = 0.01)
EUR/PLN4.2830 / 4.28704.28500.0040 PLN/EUR40.0 (pip = 0.0001)

Each row contains simultaneous, hypothetical bid and ask prices. The mid is their average. Only after dividing the difference by the pip size do you obtain the final column. Here the pip size is 0.01 for JPY rates and 0.0001 for EUR/USD and EUR/PLN. We are not comparing the availability of these quotes to different counterparties.

A useful data check is simpler than a spread/ATR threshold: reconstruct the spread from two prices and check the unit displayed by the platform. Cost comparison methods belong in lesson 2.8. There is no universal ATR percentage below which the spread ceases to affect the result.

15 January 2015: the SNB decision and the limits of quotations

On 15 January 2015, the Swiss National Bank (SNB) discontinued its minimum exchange rate of 1.20 CHF per EUR.[5] The event distinguishes a price recorded on a chart from an offer available to an order: different sources could show different prices and gaps in quoting. We are not reconstructing a single shared low, spread or client loss here. If a hypothetical calculation moved the rate from 1.20 to 0.86, the difference would be 0.34 CHF/EUR, or 3,400 pips with a pip size of 0.0001 — not 3,000. Stop behaviour during a gap is explained in lesson 2.7.

The SNB 15 January 2015 decision to discontinue the 1.20 CHF per EUR minimum and a separate hypothetical 3,400-pip calculation.
The date and minimum rate describe the SNB announcement. 0.86 is only a hypothetical calculation input, not a market-wide low or an execution price.

3. Dealer language — big figure, handle and “42–44”

Dealers may abbreviate repeated parts of a price if both parties share the context. The shorthand “42/44”, without the pair and leading digits, is not enough to reconstruct the full quote. When learning or checking calculations, it is better to retain the entire price; writing it in full reduces the risk of an error when the leading digits change.

Big figure means the leading digits of an exchange rate, which change infrequently. For EUR/USD at 1.0842, the big figure is 1.08. For USD/JPY at 153.42, the big figure is 153. Dealers assume that both parties know the big figure, so they do not repeat it in the quote.

Small figure (pips price) means the final two digits — the part that changes from second to second. For EUR/USD = 1.0842, the small figure is 42.

Handle — a term used interchangeably with big figure, although it sometimes refers to the next round exchange rate level (for example, “the 1.09 handle” in EUR/USD means that the rate has crossed 1.09).

With a known big figure of 1.08, the shorthand “42/44” means EUR/USD 1.0842/1.0844. When the price crosses 1.0900, the big figure must be established again. The final digits alone reveal neither the date, source, notional nor quote validity. Dealer shorthand does not replace a trade confirmation.

The best visible rate on an institutional platform may relate to different credit relationships and a different amount from a CFD client's quote. EBS provides both a best-price view and credit-screened data. The access chain does not always include a prime broker (PB) and an aggregator. Do not compare prices without knowing to whom, and for what amount, they are available.[4]

Market terminology — “given” and “paid” on EBS

“Given” and “paid” describe the side on which a trade is executed: selling the base currency at the bid or buying it at the ask. For this article's calculations, a full buy/sell description and price are enough. Knowing dealer shorthand reveals neither the future exchange rate direction nor every participant's intentions.

The big figure of 1.08 and shorthand 42/44 reconstruct EUR/USD 1.0842/1.0844 only within an established context.
The big figure of 1.08 and shorthand 42/44 reconstruct EUR/USD 1.0842/1.0844 only within an established context.

4. Cross rates — calculating a price without the dollar

4.1. What is a cross rate?

A cross rate is an exchange rate between two currencies neither of which is the US dollar. EUR/GBP, EUR/JPY and GBP/CHF are all cross rates. The name reflects the historical need to derive the rate from two dollar rates — because a direct market between, for example, the German mark and the yen virtually did not exist. You had to “go through” the dollar.

Today, many crosses have their own direct markets — EUR/GBP and EUR/JPY are traded on EBS and Reuters without going through the dollar. Nevertheless, the cross-rate calculation principle still applies, because it helps keep the network of exchange rates consistent.

4.2. How to calculate a cross rate

Calculating cross rates manually today is about understanding where the price and execution cost come from, rather than placing trades by hand.

There is one principle: arrange the equation so that the dollars cancel. For example: EUR/JPY = EUR/USD × USD/JPY = 1.0850 × 153.40 = 166.44. The dollars cancel, leaving the price of euros in yen. If the dollar is on the same side of both pairs, divide: CHF/JPY = USD/JPY ÷ USD/CHF = 153.40 ÷ 0.8850 = 173.33. If a broker constructs a cross synthetically from two dollar legs, there is a brief risk of non-simultaneous execution — one leg has filled while the other is waiting for liquidity. If the second quote changes or is rejected, the result of the conversion route may differ from the product of the rates. The rate calculation itself does not account for the open exposure between executions.

Reciprocal bid/ask rates — the sides are inverted and exchanged

Inverting a quote is more than calculating 1/x — the bid and ask switch roles:

bidreciprocal = 1 ÷ ask · askreciprocal = 1 ÷ bid

Example: EUR/USD = 1.0842/1.0844 → USD/EUR bid = 1 ÷ 1.0844 = 0.922169, ask = 1 ÷ 1.0842 = 0.922339. Intuitively, buying euros “expensively” at 1.0844 USD means selling dollars “cheaply” at approximately 0.9222 EUR. Calculating 1/bid and 1/ask without swapping the sides produces a quote with a negative spread — a sign of an error.

4.3. Cross rates using bid/ask — the spread widens

In real trading, there is not one price but two: bid and ask. Calculating a cross rate using bid/ask requires extra care, because the spread on a synthetic cross is usually wider than on either component pair — the spreads of both “legs” carry through to the resulting pair (in relative terms, rather than by simply adding pips — each pair's pip is a different unit), unless the cross is quoted directly from its own order book.

The general rule: the cross bid is the execution price for selling the cross's base currency, while the cross ask is the price for buying it. Which sides of the legs produce them depends on the operation: when multiplying , use bid × bid and ask × ask; when dividing , divide bid by ask, and ask by bid.

Example: you want to calculate EUR/JPY bid/ask.

Inputs: EUR/USD = 1.0842 / 1.0844. USD/JPY = 153.38 / 153.42.

EUR/JPY bid = EUR/USD bid × USD/JPY bid = 1.0842 × 153.38 = 166.29

EUR/JPY ask = EUR/USD ask × USD/JPY ask = 1.0844 × 153.42 = 166.37

Why bid × bid when multiplying? You sell euros for yen in two steps: sell EUR for USD (receiving the EUR/USD bid), then sell USD for JPY (receiving the USD/JPY bid) — both legs use the bid side. When buying, both similarly use the ask. This logic does NOT carry over mechanically to crosses calculated by division — there, the sides cross (see the example below).

The EUR/JPY spread calculated from the full, unrounded values is 166.368648 − 166.294596 = 0.074052, or approximately 7.4 pips (the displayed quote of 166.29/166.37 suggests 8 — the effect of rounding both ends). For comparison, the EUR/USD spread is 2 pips and the USD/JPY spread is 4 pips, but these numbers cannot simply be added because each pair's pip has a different value; the cross spread always comes from calculating with the legs' bid/ask prices.

A cross calculated by division using bid/ask — the most common beginner's mistake. When the dollar is the quote currency in both pairs (EUR/USD and GBP/USD), calculate EUR/GBP by division, crossing the sides of the legs:

EUR/GBP bid = EUR/USD bid ÷ GBP/USD ask · EUR/GBP ask = EUR/USD ask ÷ GBP/USD bid

Inputs: EUR/USD = 1.0842/1.0844, GBP/USD = 1.2648/1.2652. Then EUR/GBP bid = 1.0842 ÷ 1.2652 = 0.8569, ask = 1.0844 ÷ 1.2648 = 0.8574 — a spread of approximately 4.3 pips (from the unrounded values: 0.85737 − 0.85694). Intuitively, selling euros for pounds means selling EUR for USD (at the bid) and using the dollars received to buy GBP (at the GBP/USD ask — dividing by the larger number lowers the result). Dividing bid by bid overstates the cross bid and produces a quote that does not reproduce the price implied by these two offers.

For you, the practical meaning is simple: when buying a cross, you pay its ask; when selling, you receive its bid. If the broker constructs this rate synthetically from two legs, each brings its own cost and slippage risk.

Understanding the cost of a cross

A common assumption is that if EUR/USD and USD/JPY have tight spreads, EUR/JPY will be cheap too. Not necessarily. If the broker does not have access to a good direct cross market, the cost of going through two legs can be noticeably higher than intuition suggests.

Practical tip

You cannot reliably identify how a price is constructed from visible spreads alone — the broker may aggregate several sources, add its own markup or apply a minimum spread. If your provider's cross spread is unusually wide compared with other offers, treat it as a reason to compare costs, and look for the quotation method in the instrument specification and order execution documentation.

Hypothetical EUR/PLN calculated from two simultaneous quotes; for 10,000 EUR, the amounts are 43,389.15 and 43,418.85 PLN.
Hypothetical EUR/PLN calculated from two simultaneous quotes; for 10,000 EUR, the amounts are 43,389.15 and 43,418.85 PLN.

Cross rates calculated by division: CAD/JPY (G10) and PLN/CAD

First take a major G10 cross where USD is the base currency in both legs: USD/JPY 153.38 / 153.42 and USD/CAD 1.3500 / 1.3504. To find CAD/JPY (JPY per 1 CAD), check the units: (JPY/USD) ÷ (CAD/USD) = JPY/CAD. Because selling CAD buys USD at the USD/CAD ask before selling USD for JPY at the USD/JPY bid (and buying CAD crosses the opposite legs), the sides cross: CAD/JPY bid = 153.38 ÷ 1.3504 = 113.581, and ask = 153.42 ÷ 1.3500 = 113.644 (a synthetic spread of ~6.3 JPY pips, versus 113.581..113.644 × 10,000 CAD = 1,135,811.61 vs 1,136,444.44 JPY).

The exact same rule applies when pairing an emerging/regional currency with CAD — for example USD/CAD 1.3500/1.3504 and USD/PLN 3.9990/4.0010. This is a simultaneous hypothetical model, excluding commission, slippage and volume restrictions. We want CAD per 1 PLN, meaning the PLN/CAD orientation (not claiming every retail broker lists this ticker directly; it is equally an FX conversion check).

Checking the units gives (CAD/USD) / (PLN/USD) = CAD/PLN. The notation USD/CAD ÷ USD/PLN alone does not tell you which sides to divide. You must reconstruct the client's actions. When selling PLN, you buy USD with zlotys at the ask of USD/PLN, then sell USD for CAD at the bid of USD/CAD. When buying PLN, you exchange CAD for USD at the USD/CAD ask and sell USD for PLN at the USD/PLN bid. The sides cross because one leg buys USD and the other sells it.

Dividing a cross: bid divided by ask, and ask divided by bid
PLN/CAD directionFormulaPrice in CAD per 1 PLNCAD for 10,000 PLN
Selling PLN1.3500 /4.00100.3374156463,374.16 received
Buying PLN1.3504 /3.99900.3376844213,376.84 paid

First, selling 10,000 PLN: 10,000 /(4.0010 PLN/USD) = 2,499.375156... USD. Selling those USD at 1.3500 CAD/USD gives you 3,374.156461... CAD, or 3,374.16 CAD after rounding the amount. Buying back 10,000 PLN by the other route costs 3,376.844211... CAD, or 3,376.84 CAD. The exact difference is 2.687750... CAD. Dividing one bid by the other bid would give a different number that does not describe these two client actions.

The reciprocal CAD/PLN gives PLN per 1 CAD. Its bid is 1/ask PLN/CAD = 3.9990/1.3504, while its ask is 1/bid PLN/CAD = 4.0010/1.3500. The model gives approximately 2.961344787/2.963703704 PLN/CAD. Selling 1,000 CAD yields 2,961.34 PLN; buying 1,000 CAD costs 2,963.70 PLN. Converting 1,000 CAD does not use the 10,000 PLN amount from the previous table — we have changed the transaction's base amount.

A rounded display is not a new offer. We calculate using full numbers and display the final amounts to two decimal places. If a provider gives a binding CAD/PLN quote with a specified tick size, its price and available amount determine the transaction. You cannot place an order at any calculator result simply because the mathematical quotient has nine digits.

A practical check for both formulas: the cross bid should be below the ask when the legs have positive spreads and the same conditions apply. If your result is the reverse, check the sides, orientation and price synchronisation. This check detects many errors but does not settle every data issue — two feeds may have different timestamps or show different products.

A PLN calculation: two routes to the same EUR amount

Hypothetical model. The simultaneous quotes are EUR/USD 1.0850/1.0852 and USD/PLN 3.9990/4.0010. We compare an exchange of 10,000 EUR; both legs have sufficient liquidity and additional fees are zero. This is not a current bank offer or an automatic method for converting CFD profit or loss.

The units guide the calculation: (USD/EUR) × (PLN/USD) = PLN/EUR. When selling EUR, you then sell the USD received, so both bids apply. When buying EUR with PLN, you buy USD and then EUR, so both asks apply. The result must be expressed in zlotys per euro, rather than dollars or a “sum of pips”.

Synthetic EUR/PLN: price and cash flow
DirectionCalculation without roundingPrice resultAmount for 10,000 EUR
Selling EUR → PLN1.0850 × 3.99904.33891500 PLN/EUR43,389.15 PLN received
Buying EUR with PLN1.0852 × 4.00104.34188520 PLN/EUR43,418.852 PLN; rounded to 43,418.85 PLN

The spread is 4.34188520 − 4.33891500 = 0.00297020 PLN/EUR, or 29.702 pips with a pip size of 0.0001. Multiplying by 10,000 EUR gives 29.702 PLN. Rounding each amount to 0.01 PLN (one Polish grosz) gives a difference of 29.70 PLN; we retained full price precision to check the spread.

Comparing two simultaneous quotes for the same amount
QuoteSelling 10,000 EURBuying 10,000 EUR
Via USD43,389.15 PLN43,418.85 PLN
Direct: 4.3392/4.341643,392.00 PLN43,416.00 PLN
Difference in favour of the direct quote2.85 PLN more received2.85 PLN less paid

The exact difference on the buying side is 2.852 PLN; we display 2.85 PLN after rounding to 0.01 PLN units. In this model, the direct quote is better in both directions. With another set of prices, it may be better in only one direction, so the spread alone does not settle the comparison. Adding fees for two transfers or commission on one leg could change the result. Read about costs in lesson 2.8.

Reverse check: if a provider gives PLN/EUR instead of EUR/PLN, do not simply swap the names. For the quote above, the reciprocal bid is (1 / 4.34188520) EUR per PLN, while the ask is (1 / 4.33891500) EUR per PLN. Selling zlotys then means buying euros. Reversing the currency order also switches the sides, because it reverses the exchange direction.

4.4. Directly quoted versus synthetically calculated cross rates

“Direct” or “synthetic” describes how a particular source constructs a price. The same pair may have its own order book, be calculated through an intermediary currency, or appear in several streams simultaneously. You cannot infer the method from the symbol or spread width alone. Price source, execution method and transactional counterparty are three separate pieces of information.

A synthetic price comes from two full quotes. Each leg contributes a spread, but the legs' pip counts are not additive: they have different units and conversion rates. The calculation requires bid and ask for both pairs from the same moment. When the legs execute sequentially, price-change risk arises between them; calculating the cross rate alone does not remove it.

Consider a hypothetical NZD/CAD in two states. In A: NZD/USD = 0.6000/0.6001, USD/CAD = 1.3500/1.3501. The cross is 0.81000000/0.81019501, with a spread of 1.9501 pips at a pip size of 0.0001 CAD/NZD. In B: NZD/USD = 0.5995/0.6005 and USD/CAD = 1.3495/1.3505. The cross is 0.80902525/0.81097525, with a 19.5-pip spread. Widening the legs changes the result, but neither 1 + 1 nor 10 + 10 pips is a formula for the cross spread. This is an arithmetic model, not a record of an economic data release.

Two full sets of leg prices and the NZD/CAD result — a hypothetical model
Model stateNZD/USD bid/askUSD/CAD bid/askNZD/CAD crossCross spread
A0.6000/0.60011.3500/1.35010.81000000/0.810195011.9501 pips
B0.5995/0.60051.3495/1.35050.80902525/0.8109752519.5 pips

*Illustrative values — actual levels depend on the provider, time and conditions. The diagram below shows the synthetic case:

EUR/USD 1.0842 / 1.0844 USD/JPY 153.38 / 153.42 + EUR/JPY (synthetic) bid × bid; ask × ask Model spread 7.4052 pips
Synthetic EUR/JPY: the broker constructs the price from the bid/ask of two dollar pairs. Both legs' spreads carry through to the resulting pair (in relative terms — raw pips cannot be added); the provider may also apply a markup, if it is not already included in the quotes.
Model scenario — a synthetic cross around Canadian data

In state B, selling 10,000 NZD at the synthetic bid gives 8,090.2525 CAD. Immediately buying back the same amount at the ask would cost 8,109.7525 CAD: the 19.50 CAD difference is one full spread for that round trip. In actual execution, each leg requires an available offer for that amount. The model assumes simultaneous prices and excludes commission, fees and exchange rate changes; it does not describe profit from an interest rate forecast.

A direct quote can be compared with the calculated cross bid/ask separately for buying and selling. The comparison must concern the same amount, time and settlement terms. A smaller spread does not guarantee a better price in both directions: the entire quote may be shifted relative to the other. The PLN example also shows this difference.

Cross-rate rounding: calculated, displayed and permitted prices

The synthetic EUR/JPY from the earlier model is 166.294596/166.368648 JPY/EUR. The exact spread of 0.074052 means 7.4052 pips at a pip size of 0.01. Displaying two decimal places as 166.29/166.37 shows a difference of 0.08, or 8 pips. This is not an arithmetic contradiction: both ends were rounded separately and only then subtracted.

For EUR/PLN 4.33891500/4.34188520, a model grid of 0.0001 PLN/EUR and conservative rounding of bid down and ask up give 4.3389/4.3419. The spread is then 0.0030 = 30 pips, rather than exactly 29.702. On 10,000 EUR, the lower bid gives 43,389.00 PLN, or 0.15 PLN less than the full product, while the upper ask costs 43,419.00 PLN, or 0.148 PLN more. This is a deliberately specified model rule, not a statement about how every broker rounds.

Ordinary rounding to the nearest five-decimal result could instead raise the bid from 4.338915 to 4.33892. If treated as a full offer, the screen would then promise 0.05 PLN more for 10,000 EUR. Sometimes the screen rounds only the display while settlement uses greater precision. Sometimes the offer itself has a specified grid. Distinguish these situations and check the trade confirmation.

When checking a cross, retain the raw leg prices, full result, display rule and tick size of any resulting instrument. State whether the result is a calculation, an indicative display or a binding offer. This record lets you later explain a difference of a few hundredths of a zloty without inventing an extra commission. Point and tick size are developed in the next lesson, 2.4.

The same symbol: checking time, amount and quote type

Suppose the EUR/PLN quote of 4.3392/4.3416 comes from source A, while the EUR/PLN cross of 4.33891500/4.34188520 comes from source B. The digits alone allow you to calculate the difference. They do not establish that 10,000 EUR can be bought or sold more cheaply. You need consistent “quote details”: the full pair, product type, sides, time, amount and terms. The following list is a checking method, not an extra fee schedule.

Details of two prices before comparing quotes
Field to retainChecking questionWhy it changes the conclusion
Instrument and orientationEUR/PLN or PLN/EUR; currency delivery or a CFD?A similar price does not make products identical
Price typeBid/ask, mid, last or benchmark?Only the appropriate side describes the action's direction
TimestampProvider or receipt time; which moment are we comparing?An old bid and a new ask may create an artificial spread
Amount and unitEUR in the EUR/USD leg; USD in the USD/PLN leg?The same number, 10,000, denotes a different currency
TermsValidity, fee, counterparty and settlement?A reference price does not confirm executability

Checking the amount on each leg. Buying 10,000 EUR at the EUR/USD ask of 1.0852 requires 10,852 USD. If the USD/PLN ask of 4.0010 is available for only 9,000 USD, we have no evidence of a price for the full 10,000 EUR. With unchanged quotes and no other restrictions, 9,000 USD would cover 9,000/1.0852 = 8,293.402138... EUR. The remainder would require another offer, whose price we do not know. We do not append it at the same ask or call the original result the price of the entire transaction.

On the selling side, 10,000 EUR at the bid of 1.0850 yields 10,850 USD. If the USD/PLN bid covers at most 10,000 USD, the second leg does not cover the whole amount. Under this restriction, the first leg's maximum is 10,000/1.0850 = 9,216.589862... EUR. The available cross amount may therefore differ for buying and selling, even though the screen shows one pair of prices. This is another reason not to treat the best rate as a rate available for any notional.

Checking the time on both legs. In the model, both quotes at 12:00:00.000 match the earlier example. At 12:00:00.200, you receive a new USD/PLN quote of 4.0005/4.0025, but EUR/USD still carries the old 12:00:00.000 timestamp. Combining these numbers creates a new product, but does not establish that both offers were simultaneously available when the order was sent. Two hundred milliseconds is the assumed interval in the model, not a universal threshold for acceptable latency.

If the feed gives receipt time rather than quote creation time, even two equal timestamps do not ensure that the data have the same age. Your own comparison should record what the timestamp means and how the provider removes stale prices. Without this, the cautious conclusion is “a difference in displayed data”, rather than “an executable saving”. Without amount information, the result for 10,000 EUR is an assumption that must be stated explicitly.

Checking the product. The European Central Bank (ECB) reference rate is for information purposes, and the ECB discourages using it for transactions.[8] A currency-delivery offer and a CFD quote may differ in settlement and costs, even when both concern EUR/PLN. This does not automatically justify an inflated price; it indicates that the comparison must first be restricted to matching terms. Bid/ask cannot be compared with a website's single rate as if they were two identical offers.

5. Triangular arbitrage — three prices and execution terms

If EUR/USD = 1.0850 and USD/JPY = 153.40, EUR/JPY “should” be approximately 166.44. But what happens if bank A quotes EUR/JPY at 167.00 — euros are “too expensive” there in yen? The cycle looks like this (simplified to one rate, with no spreads): you sell 1 EUR for 167.00 JPY at bank A, use the yen to buy dollars (167.00 ÷ 153.40 = 1.08866 USD), then use the dollars to buy back euros (1.08866 ÷ 1.0850 = 1.00337 EUR). You finish with approximately 0.34% profit over the full cycle — this is a three-currency arbitrage cycle (triangular arbitrage). Note the direction: sell a currency where it is overvalued and buy it back by the cheaper route — the reverse cycle gives the reciprocal of this multiplier, rather than an exactly symmetric percentage loss.

An inconsistency in single reference prices is not enough to demonstrate arbitrage. Three offers must be simultaneously executable for the same participants and amounts. Only then do you account for the appropriate bid/ask sides, commission, settlement and the risk of executing only part of the cycle. Mid-prices from different sources or moments may suggest an apparent opportunity.

The conditions are demanding: access to every leg, sufficient liquidity, compatible credit limits and execution before the quote changes. There is no public guarantee of how long an “opportunity” lasts or a fixed profit in pips. Manually executing three orders is not an atomic transaction. If the first leg fills and the second is rejected, an open exposure remains that the ideal equation does not show.

Cross relationships are a useful test of exchange rate consistency. A direct price may nevertheless lie within the interval permitted by the two legs' bids and asks without allowing a profitable cycle. Different costs and access terms also create an interval, rather than one absolutely mandatory price. Checking both directions distinguishes this situation from an arithmetic error.

Market event — the sterling flash crash of 7 October 2016

The BIS report on the sterling event of 7 October 2016 describes the interaction of liquidity, orders and market structure.[6] It is a warning against treating a price in one record as simultaneously available elsewhere. We do not use this event as evidence of arbitrage profit or as a universal scenario for stop-loss behaviour.

EUR USD JPY 1. Sell EUR buy JPY @ 167.00 2. Sell JPY buy USD @ 153.40 3. Sell USD buy EUR @ 1.0850 1 EUR → 167 JPY → 1.08866 USD → 1.00337 EUR (model without spreads or fees)
Single-rate model without spreads or fees: 1 EUR →167 JPY →1.08866 USD →1.00337 EUR. It does not establish an executable opportunity; below we check both directions using bid/ask.

Testing both cycles with bid and ask

Simultaneous model: EUR/JPY 166.35/166.38, USD/JPY 153.38/153.42 and EUR/USD 1.0842/1.0844. We start with 1 EUR. For this check, there are no commissions, minimum amounts or credit restrictions. The spread alone is enough for both cycles to return less than the initial 1 EUR.

Two cycle directions using different quote sides
CycleFull formulaEUR at the end
EUR → JPY → USD → EUR166.35 / 153.42 / 1.08440.999887912
EUR → USD → JPY → EUR1.0842 × 153.38 / 166.380.999486693

In the first cycle, sell EUR for JPY at the EUR/JPY bid, buy USD at the USD/JPY ask, then buy EUR at the EUR/USD ask. In the second, sell EUR at the EUR/USD bid and USD at the USD/JPY bid, then buy EUR at the EUR/JPY ask. A result above 1 before fees would only be a condition for further investigation; a result below 1 rules out profit in this model. We do not use the mid to replace any of the six prices.

Checking the first cycle's units: (JPY/EUR) / (JPY/USD) / (USD/EUR) gives a dimensionless multiplier of the initial EUR amount. For 10,000 EUR, multiply the result by 10,000 only if all three offers cover the required amount. A good price for 1 EUR does not establish the same price for 10,000 EUR.

6. Where prices originate — from EBS to your screen

The price on your screen is the result of a specific supply chain: for some brokers it runs from the interbank market through a prime broker and aggregator; for others, from bilateral bank streams, non-bank market makers or an internal book. Below is one common model; the cost of each link is not always a margin added to the quote — it may be commission, a credit fee or a technology fee.

One source may be EBS Market, part of CME Group, which offers an anonymous order book with firm quotes. Others include platforms and bilateral streams from individual providers. There is no single interbank price available to everyone. On EBS, credit-screened data may differ from the overall best quote; the visible quote size alone does not guarantee that a participant can execute the entire amount.[4] The broader landscape is discussed in the article on the interbank market.

A retail CFD provider may base its own quote on external prices and apply a markup, a separate commission or both. This does not mean that every client transaction follows the same chain into an interbank order book. The broker's risk management and the client's counterparty are separate matters. Comparing prices requires their type, time, amount and execution terms; comparing the full cost also requires the fee schedule.

A quote update is not a transaction

A quote update is not equivalent to a trade. A stream may contain changes in the bid, ask or both without any new agreement being entered into. Therefore, do not describe the number of feed updates as market turnover. The distinction between a price tick and tick volume is explained in lesson 2.4.

Price source EBS / bilateral Prime Broker optional credit LP aggregator quote aggregation Retail broker + markup / commission Your screen visible bid/ask Illustrative model: not every structure includes a PB and aggregator
One common FX price-chain model: an interbank price passes through several nodes before reaching your screen. The structure and form of costs differ between providers.

6.1. Last look: the quote, request and final acceptance

Last look is a stage at which a provider receiving a trade request can finally accept or reject it. Checks may cover validity, including credit, and price. It does not automatically apply to every source, platform or account advertised as ECN. Rejection, a new price proposal and execution with slippage are different events; do not call them collectively “last look”.[3]

Principle 17 of the December 2024 FX Global Code calls for transparency about last look: the purpose of the checks, expected duration and operation of the price check, including the direction of its assessment. The Code is a voluntary set of wholesale-market principles, rather than a statutory guarantee of retail CFD execution. We do not give one universal window in milliseconds; specific terms depend on the provider.[3]

A historical quote feed usually does not reproduce an order's full journey: transmission delays, limit checks, rejections and actual volume availability. A backtest based solely on prices therefore does not measure every execution condition. Differences in the result may also have other causes, so they are not standalone evidence of a particular broker mechanism.

Symmetric versus asymmetric last look

A symmetric price check assesses movement in both directions, while an asymmetric check may treat movements favourable and unfavourable to the provider differently. Knowing this rule helps interpret rejections, but data from executed trades alone are not enough to identify it. Rejected requests, their submission times and comparable quotes are also needed. Do not infer a provider's configuration from a few unfavourable fills.

How to check whether your broker uses asymmetric last look

In an execution report, separate the requested price, accepted price, time, amount and outcome: full fill, partial fill or rejection. Compare the ask for purchases and the bid for sales; using the mid as a reference includes the spread itself in the difference. Also retain the source identifier. There is no universal count of 100–200 trades that guarantees detection of asymmetry — without a full sample and control of conditions, the conclusion remains limited.

US non-farm payrolls (NFP) — the spread in the first seconds after the release

An economic data release may change the exchange rate, spread and available volume simultaneously. A hypothetical spread increase from 0.6 to 4.2 pips does not mean that the mid moved by 3.6 pips. The two sides may move apart around a stable midpoint, or while the midpoint also moves. Compare both bid/ask prices and timestamps; release calendars and market reactions belong in fundamental analysis.

WMR 16:00 London — a benchmark versus a live quote

WMR Closing Spot Rates include a benchmark for 16:00 London time. The WMR methodology in the version dated 30 January 2026 describes a five-minute window for closing rates.[7] A benchmark calculated according to its methodology is not a live buy/sell offer for your amount. We do not infer a fixed spread or guaranteed exchange rate movement from the fixing window. When converting to your local time, use the applicable date and time-zone rules.

Hypothetical spread changes with a constant mid; no specific fixing time
Model momentEUR/USD bidEUR/USD askMidSpread
A1.084251.084351.084301 pip
B1.084201.084401.084302 pips
C1.084101.084501.084304 pips

The table values are illustrative — actual levels depend on the day, quote source and liquidity conditions.

The table shows only illustrative spread changes over time. An association with a benchmark time does not establish the cause of every movement. Analysing an actual day would require a particular provider's bid/ask prices, volume and timestamps. WMR should not replace the historical execution price from a client's account.

7. Quotations in practice — what the textbook leaves out

In the model, the spread changes from 0.6 to 4.2, then to 0.8 pips. Without both prices, we do not know whether the mid moved. Without the specification, we do not know whether the chart shows bid, ask or last. The following observations help diagnose data; the numbers are hypothetical and make no promise about the behaviour of a particular pair or provider.

Fixed and variable spreads describe the offering's terms. With a variable spread, you need both prices at each moment examined. With a fixed-spread offer, check its validity period, possible exceptions and execution rules. Providers do not all have the same terms, so do not assume automatic widening or guaranteed constancy in every event.

The price you see may not be the price at which you will buy. Time passes between order submission and execution (latency), during which the price may change. The difference between the expected and executed price is slippage: fractions of a pip in a liquid market, several pips under high volatility; it can be favourable or unfavourable. Some platforms and execution modes let you limit the permissible deviation (for example, maximum deviation or market range) — the feature's availability and operation depend on the platform, execution mode and broker settings; see the article on order types.

7.1. Why a stop loss can trigger outside the candle's range

Why does the chart not show that your stop was hit? A trader posts a screenshot on a forum: “my broker stole my stop loss”. A short EUR/USD position has a stop loss at 1.0850, but the highest candle reaches only 1.0845. The explanation is straightforward: for most retail FX symbols, MT4/MT5 charts are built from bid prices (in MT5, the chart-building mode is a symbol property and may use bid or last), while short positions close at the ask. If the spread jumps from 1 to 8 pips during the example's 14:30 data release, the ask line hits the stop without a trace on the bid chart. To diagnose this, enable “Show Ask line” in the chart properties — it shows the current ask level (historical candles are still built from bid). The full mechanics of order triggering and execution are covered in the article on order types.

Short-position model: the ask can reach the stop level outside the bid candle's range. For a long position, the relevant side is the bid.
Short-position model: the ask can reach the stop level outside the bid candle's range. For a long position, the relevant side is the bid.

Spread widening also affects account valuation: a position is valued at the bid or ask, so a wider spread reduces equity without a midpoint movement — with limited margin, this may trigger stop out. Equity, free margin, position sizing and the close-out threshold are examined in the article on leverage and margin and can be sized in the position size calculator.

The visible price versus the visible bid/ask

A chart price is not evidence of an execution price. Checking an order requires the feed's price type, trigger time, execution side and trade report. A candle screenshot alone or an assumed “typical” slippage does not settle the matter. Retain these data before comparing the model result with the account history.

Model scenario — overnight spread widening

Check the trigger side. For a hypothetical short EUR/USD position, the stop is at 1.0850. At the time checked, the bid is 1.0845 and the ask is 1.0853, giving a spread of 0.0008 = 8 pips. The ask has crossed the level even though the bid candle need not have touched it. For a long position, the relevant side is the bid; an invisible ask does not explain that case. The current ask line alone does not reconstruct the historical high. The chart-building model and symbol specification are described in the MT5 documentation.[2]

Spread correlation during a systemic shock

Rates involving different currencies may respond to a common factor, but establishing correlation requires a period, data frequency and calculation method. Do not equate simultaneous currency weakening with a correlation of 1. Different symbols alone are not enough to assess combined exposure; position-unit checks are shown in lesson 2.5, while risk management is a separate topic.

Watch the spread units. On platforms quoting to five decimal places, a spread of “3” usually means 3 pipettes = 0.3 pips; on four-digit platforms, it means 3 pips. The mistake changes the result by an order of magnitude. Pips, pipettes and points (and tick volume) are distinguished in the article on units of measurement.

Spreads widen at rollover — when positions roll to the next value date (17:00 New York time — 22:00 GMT / 23:00 CET, shifting temporarily when US and European daylight-saving changeover dates differ). Liquidity providers withdraw aggressive quotes then. An important calculation detail: when the spread widens symmetrically around a stable mid, the marked-to-market value of an individual position worsens by approximately half the widening (a long position is valued at the bid, a short at the ask), rather than the entire widening. With limited margin, this can still hurt. Rollover, triple charges and overnight costs are explained in the article on costs and in the trading costs calculator.

Weekend gap. After the weekend, the first quote may open far from Friday's close — a stop loss then triggers at the first available price, with a wide opening spread. Order mechanics during gaps are covered in the article on order types.

An information website's price is a reference, not an offer. A financial information website's chart may use the mid, bid, last trade or another reference feed. Calculating a potential result from it ignores the visible spread (which usually already includes the broker's markup) and differences in quote source and time. Retail trades execute at the ask for purchases and the bid for sales.

Model of symmetric spread widening around a stable mid; the valuation side changes by 1 pip, rather than the full 2-pip widening.
Model of symmetric spread widening around a stable mid; the valuation side changes by 1 pip, rather than the full 2-pip widening.
The platform suffix trap. Brokers create different “classes” of the same instrument (for example, EURUSD and EURUSD.pro), but suffix meanings depend entirely on the broker — they may indicate an account type, a different specification, settlement currency or price source. A mistake can have a tangible effect: a trader selects an instrument that does not match their account type and pays a cost several times higher. Check the instrument specification before the first trade.
Level 2 / DOM at a CFD broker is not a global order book. Depth of Market on a retail platform shows only part of the liquidity from a particular aggregator or broker, rather than the full OTC market. Do not interpret “buy walls” in a CFD broker's DOM as you would CME order flow.

8. What to remember

How to read a quote in 10 seconds — a checklist

1. Which currency is the base (the first)? It is the “commodity”.
2. Is USD in the numerator or denominator? This determines what a “rising rate” means.
3. Bid (lower) = your selling price. Ask (higher) = your buying price.
4. Ask − bid = spread = your entry cost in pips.
5. A cross? Check whether the broker quotes it directly or calculates it from two legs.

Interpreting a price correctly requires the symbol, bid/ask side, unit and instrument specification. Then come the time, amount and access terms. Only this set of information lets you compare two quotes and reproduce the calculation. You can complete the following test without forecasting the market.

A short test: what does the screen tell you, and what is still missing?

You receive three numbers: EUR/USD 1.08420/1.08435, a chart price of 1.08428 and a spread of “15”. Are they contradictory? Not necessarily. The first two prices differ by 0.00015 USD/EUR, or 1.5 pips at a pip size of 0.0001. “15” may mean 15 points with point = 0.00001. The chart price of 1.08428 is close to the midpoint of 1.084275, but similarity alone does not prove that the feed shows the mid.

To sell 10,000 EUR, the starting point is the bid of 1.08420: 10,842.00 USD. Buying that amount at the ask costs 10,843.50 USD. The difference is 1.50 USD. A conversion rate is missing if you want to express that USD figure in an EUR, GBP or PLN account; available volume and execution rules are missing to confirm executability. A fee schedule is missing for the total cost. This list of missing data is more useful than extra decimal places.

FAQ — quotations, bid/ask and cross rates

What does EUR/USD 1.0842/1.0844 mean?

You sell 1 EUR for 1.0842 USD at the bid and buy 1 EUR for 1.0844 USD at the ask. They are sides of the same pair. The amount, offer availability and execution terms require additional information.

Is the ask always above the bid?

Yes, in a standard quote with a positive spread. A zero spread is also possible. An unusual display with the ask below the bid requires checks of time, source and executability; it does not automatically prove arbitrage.

How do you invert a bid/ask quote?

The reciprocal bid is 1/ask, while the reciprocal ask is 1/bid. For EUR/USD 1.0842/1.0844, this gives USD/EUR of approximately 0.922169/0.922339, in euros per dollar.

How do you calculate a synthetic cross rate through USD?

When USD is on opposite sides of two pairs (for example EUR/USD × USD/CAD or EUR/USD × USD/PLN), multiply bid × bid for the cross bid and ask × ask for the cross ask. When USD is on the same side (for example CAD/JPY from USD/JPY ÷ USD/CAD, or EUR/GBP from EUR/USD ÷ GBP/USD), cross-divide: bid ÷ ask for the cross bid and ask ÷ bid for the cross ask. Both legs must be simultaneous and executable for your amount.

Why can a short position close outside the bid candle?

A short position closes through a purchase at the ask, while the chart may show the bid. The ask may reach the stop level without the bid touching it. Check the chart type and both historical prices; the current ask line does not reproduce the history.

Is a mid-rate or reference rate an executable offer?

You should not assume so. The mid is the average of bid and ask, while a benchmark has its own methodology. An offer for a specific amount requires a buying or selling price and execution terms.

Sources and how they are used

  1. CME Group — Understanding FX Quote Conventions — Base/quote currencies and American/European conventions; not evidence of historical spreads. Verified: 15 November 2026.
  2. MetaQuotes — Symbol Properties / Market Watch — SYMBOL_CHART_MODE, SYMBOL_POINT, SYMBOL_SPREAD; bid or last charts, spread in points. Verified: 15 November 2026.
  3. GFXC — FX Global Code, December 2024, Principle 17 — Last look: validity and price checks, transparency of rules; a voluntary code. Verified: 15 November 2026.
  4. CME EBS — Credit Screened Market Best Processing — Credit-dependent prices; the displayed amount may not be fully executable for a particular participant. Verified: 15 November 2026.
  5. SNB — Discontinuation of minimum exchange rate, 15 January 2015 — Discontinuation of the minimum rate of 1.20 CHF/EUR; not evidence of a single low or market-wide spread. Verified: 15 November 2026.
  6. BIS Markets Committee — The sterling flash event of 7 October 2016 — Description of the event and market structure; not used to arbitrarily attribute profits to retail traders. Verified: 15 November 2026.
  7. LSEG — WMR FX Benchmark Methodology, version 30 January 2026 — WMR Closing Spot Rates, 16:00 London and the five-minute closing-rate window. Verified: 15 November 2026.
  8. ECB — Euro foreign exchange reference rates — Informational reference rates; the ECB discourages their use for transactions. Verified: 15 November 2026.

Every price table in this article is an explicitly hypothetical model. The calculations check quote sides, units and rounding; they are not market quotations.

Your learning progress

Finished this lesson? Mark it yourself. Opening or scrolling a page never marks it complete.

Progress requires JavaScript and browser storage.

Saved only in this browser. No account or cross-device sync. Clearing site data can erase your progress.

Jarosław Wasiński

Editor-in-chief, ForexMechanics.com • Macro & FX analyst

Independent analyst and practitioner with over 20 years of experience in financial markets. Actively involved in Forex since 2007, with a focus on fundamental analysis, OTC market structure, and disciplined capital risk management.

  • Creator and editor-in-chief of MyBank.pl, providing reliable financial education since 2004.
  • Author of hundreds of in-depth market commentaries, structural analyses, and educational materials for traders and investors.
  • Advocate for market transparency, promoting education grounded in hard data and institutional reports (BIS, ESMA, CFTC).

All content is educational and informational only – it does not constitute investment advice or a recommendation. Remember: leveraged trading (Forex/CFD) carries a high risk of rapid capital loss.