Forex spreads, commissions and swaps: what each trade really costs

A trade's price result and its final account result are different numbers. Reconcile one hypothetical EUR/USD CFD from its actual fills, commissions and financing. Then learn how to estimate the same components before trading, compare offerings and convert account entries without charging the spread twice.

0.10-lot EUR/USD model. All amounts in PLN. Midpoint is not a guaranteed fill price.

Why does a 10-pip chart move leave only USD 10.50?

Imagine a client reviewing a completed long EUR/USD CFD with a notional amount of EUR 20,000, or 0.20 lot under a contract size of EUR 100,000 per lot. The client compares the bid at entry and exit and sees a 10-pip rise. At USD 2 per pip, that suggests USD 20. The trade's net result is USD 10.50 after the stated charges.

Nothing is missing from the model. The chart comparison uses different prices from the actual opening trade, and the account has separate charges. All numbers below are hypothetical. We assume a linear EUR/USD CFD, a pip of 0.0001, unchanged volume and the complete set of entries stated here. There is no currency conversion, tax or other fee in this opening example.

Start with the prices that actually executed

One opening and one closing trade; prices in USD per EUR
EventBid / askConfirmed fill
Open the long1.0850 / 1.0852Buy CFD, notional EUR 20,000, at 1.0852
Close the whole long1.0860 / 1.0862Sell CFD, notional EUR 20,000, at 1.0860

The price result is 20,000 × (1.0860 − 1.0852) = USD 16. The model has no slippage relative to the relevant quoted ask and bid. The bid-only chart rose from 1.0850 to 1.0860, but the client did not buy at that first bid.

The USD 4 difference from the USD 20 chart comparison is already captured by the execution prices. With the same 2-pip spread at both events, an unchanged-price round trip would cost one full spread: 2 × USD 2 = USD 4. It is not a second commission deducted by the platform. The detailed spread section also considers unequal entry and exit spreads.

Add the separate entries, preserving their signs

Suppose the history records a USD 2 commission on entry, another USD 2 on exit and a USD 1.50 financing debit. Those are the only additional entries. Financing is read from this model statement, rather than inferred from a central bank rate.

Reconcile the full round trip in USD
ComponentSigned amount
Price P&L from confirmed fills+16.00
Opening commission−2.00
Closing commission−2.00
Financing−1.50
Net result+10.50

Check: 16 − 2 − 2 − 1.50 = USD 10.50. Deducting another USD 4 of spread would produce USD 6.50 and count the same price effect twice. A financing credit would instead have a positive sign. A positive credit is still only one part of the position's result. [2] [7]

A cost estimate needs a named starting point

There are two consistent ways to explain the same trade. Starting with the actual-fill result, use USD 16 and add the separate entries. Starting with the model's midpoint benchmark, the midpoints are 1.0851 and 1.0861, giving USD 20 before price costs. Then subtract USD 4 of price cost, USD 4 of commission and USD 1.50 of financing: again USD 10.50.

Mixing those starting points causes double counting. A midpoint is a comparison benchmark, not a promised fill. When actual fills differ from the quoted ask or bid, specify the slippage reference before adding a decomposition. The full multi-currency ledger below extends this method to unequal spreads, slippage and separate currency conversions. It uses a different, explicitly stated set of assumptions. [3]

A number labelled swap is not a complete price schedule

Before estimating financing, identify the mode, unit, position direction, quantity and sum of day multipliers. USD per lot, platform points and an annual percentage require different calculations. Long and short rates are separate. A triple multiplier already includes three single-rate units; adding the same weekend again overstates the charge. [1]

A rate read today does not reconstruct a past charge if the specification changed. For the completed trade above, the recorded financing debit is USD 1.50. For a future scenario, use the relevant specification and calendar, state any rate assumptions and allow for changes. The worked questions keep those two tasks separate.

Make the comparison match the account you are explaining

Compare the same instrument, notional amount, direction and opening/closing period. A “from” spread omits commission scope, minimum fees, execution availability and holding conditions. A swap-free label still needs its fee schedule. None of those labels alone ranks providers by total cost.

If the account is in PLN, establish which USD entries are converted, when, at what rates and with what rounding. Do not convert the whole EUR 20,000 notional simply because it labels the position. Equally, do not add a conversion markup again when it is already included in the effective rate. Keep the quote, fill and separate-entry records together; their reconciled sum is more informative than the smallest advertised spread.

Three checks before accepting a cost calculation

First reconcile actual entries. Then use a separate financing model with an explicit calendar. Finally decide whether an incomplete swap number is enough to calculate anything. Each answer explains the specific mistake it avoids.

1. What is the net result of this completed round trip?

Long EUR 20,000: buy fill 1.0852 and sell fill 1.0860. Commission is USD 2 on each side, financing is a USD 1.50 debit, and there are no other charges or conversions.

Show the answer and explanation

Correct answer: +USD 10.50. Price P&L = 20,000 × (1.0860 − 1.0852) = USD 16. Opening and closing commissions total USD 4; financing is −USD 1.50. Thus 16 − 4 − 1.50 = 10.50.

No extra spread deduction belongs after this fill-based starting point. Return to the reconciled entries.

2. What financing debit follows from this separate calendar model?

Assume a constant long rate of −3 USD per lot per single charging unit and volume 0.20 lot. The position crosses three charging events with multipliers 1, 3 and 0. Use these assumptions rather than the USD 1.50 entry in the opening case.

Show the answer and explanation

Correct answer: −USD 2.40. N = 1 + 3 + 0 = 4. Financing = 0.20 lot × (−3 USD/lot) × 4 = −2.40 USD.

The multiplier 3 already covers three units. Do not add another weekend or use the unrelated opening case's recorded charge. Return to units and calendars.

3. Can “Swap Long = −6.0” establish a USD financing charge?

You know the volume is 0.20 lot and the applicable multiplier is 3. The extract supplies no swap mode, unit or result currency. No account entry is available.

Show the answer and explanation

Correct answer: more specification data is needed. If a confirmed rate were −6.0 USD per lot per unit, 0.20 × (−6.0) × 3 would give −3.60 USD. But that is an additional assumption, not a result established by the extract.

In a points mode, the monetary point value and result currency would also be needed; percentage modes use their own base and day-count method. Read the complete financing calculation.

The full cost calculation: prices, units, calendars and conversion

The short ledger isolates one result. The sections below add complete-offering comparisons, varying spreads, commission minimums, multiple swap modes and a PLN ledger. Each model states its own assumptions; its figures are not current quotes or a broker ranking.

The numbers are hypothetical. For EUR/USD, we assume a contract size of 100,000 EUR per lot and a pip of 0.0001. In the simple tables, we convert at 4.00 PLN per USD, without a conversion fee. The TCO ledger in section 5 uses separate rates for positive and negative entries. The spreads, commissions and swaps are not any firm’s current price schedule. Actual data must be read from the symbol documentation and account history.

1. Full round-trip cost — a quick comparison

The opening ledger explains one completed result. We now hold a different set of price and financing assumptions constant to compare complete round-trip costs. This table compares cost components, rather than predicting the price profit of any position.

With a notional amount of 10,000 EUR, or 0.10 lot under our assumptions, an EUR/USD pip is worth 1 USD. The table compares the full opening and closing of the same position. The spread is a hypothetical equal spread on both legs of the trade, commission covers the whole round trip, and financing covers the stated sum of multipliers. We omit slippage and conversion; a complete ledger appears in section 5.

Cost of hypothetical full round trips
ScenarioSpreadCommissionFinancing
(total for N)
Total cost
for 0.10 lot
Day trading — account with a built-in spread
EUR/USD, 1.2-pip spread, closed the same day
1.20 USD001.20 USD
Day trading — raw plus commission account
EUR/USD, 0.1-pip spread, commission 7 USD/lot R.T.
0.10 USD0.70 USD00.80 USD
Holding — 5 financing units, standard
1.2-pip spread, long rate −5 USD/lot per unit
1.20 USD02.50 USD3.70 USD
Holding — 5 financing units, raw
0.1-pip spread and 7 USD/lot round-turn commission
0.10 USD0.70 USD2.50 USD3.30 USD
30 financing units, raw
An illustrative calendar, not every month
0.10 USD0.70 USD15.00 USD15.80 USD

The long rate in this model is −5 USD per lot per single charging unit. For 0.10 lot, that is −0.50 USD; a sum of multipliers of 5 gives a cost of 2.50 USD, and 30 gives 15 USD. Five units do not mean any five consecutive nights. A 7 USD/lot round-turn commission gives 0.70 USD. In the example, the standard offering has a 1.2-pip spread and no separate commission; raw has a 0.1-pip spread and the stated commission. These are comparison assumptions, not ranges typical of the whole market.

Execution priceBuy ask / sell bidSpread and slippage in fillsP&L already includes themDo not deduct them twiceFees and financingCommission: side / round tripSwap: mode and multiplierDebit or creditOther separate feesReconcile in PLNAmount of each entryConversion rates and timesSettlement roundingTotal = account change
Components are accounted for differently: the spread is in the prices, commission is a separate fee, and financing depends on the charges. A longer holding period increases financing’s effect if the rate and exposure remain unchanged.

In this table, raw is 0.40 USD cheaper for each full round trip of 0.10 lot. Frequency increases total savings but does not, by itself, change the cost of one trade. With 30 financing units, swap accounts for 15 / 15.80 = around 94.9% of the cost. Other rates, a commission minimum or positive financing may produce a different proportion. Do not apply the table’s result to an account with different terms.

2. Spread — a cost included in prices

2.1. How the spread works, step by step

In a typical FX quote, the bid is the client’s selling price and the ask is the buying price. Their difference is the spread. For a long position, entry is at the ask and exit at the bid; for a short, the reverse. With a CFD, these are contract execution and settlement prices, rather than currency delivery. Definitions and cross rates are covered in article 2.3; here, we calculate their effect on cost.

With EUR/USD at 1.0849/1.0851, buying at ask 1.0851 and immediately selling at the unchanged bid of 1.0849 gives −2 pips. If the bid later rises to 1.0851, the closing price P&L is zero. This need not be zero net P&L, because commission and financing may apply. Initial valuation at the possible closing price shows the entire current spread; analysis against the midpoint separates the entry and exit components.

Spread cost formula:
Cost = spread (in pips) × pip value (for your volume)

Example: EUR/USD, spread 1.5 pips, 0.10 lot
• Value of 1 pip at 0.10 lot = 1.00 USD (= 4.00 PLN with USD/PLN = 4.00)
• Spread cost = 1.5 × 1.00 = 1.50 USD (6.00 PLN)

The same spread at 1.00 lot: 1.5 × 10.00 = 15.00 USD (60.00 PLN)
At 0.01 lot: 1.5 × 0.10 = 0.15 USD (0.60 PLN)

For a long, the spread cost relative to the midpoints is half the entry spread plus half the exit spread, if both quotes are symmetric around those midpoints and the fills occur at the ask and bid. When the spreads are equal, the sum equals one full spread. With a different exit spread, both values must be used. It is therefore incorrect to assign the entire cost universally to the opening moment alone.

A change in spread between entry and exit

Our illustrative long EUR/USD position is 0.10 lot. The entry midpoint is 1.08500 with a 1-pip spread: bid/ask 1.08495/1.08505. The exit midpoint is 1.08700 with a 3-pip spread: 1.08685/1.08715. We assume fills exactly at the entry ask and exit bid, with no commission or swap.

Midpoint P&L = 10,000 × (1.08700 − 1.08500) = 20 USD.
Fill-based P&L = 10,000 × (1.08685 − 1.08505) = 18 USD.

The price cost relative to the midpoints is 2 USD: half of 1 pip at entry plus half of 3 pips at exit gives 2 pips, at a pip value of 1 USD. This is neither the sum of two full spreads, 1 + 3 = 4 pips, nor just the 1-pip entry spread. With different fill prices, slippage must also be separated; midpoints are not guaranteed execution prices.

Markup in the quote. Assume a reference spread of 0.2 pips and that the provider increases the whole displayed spread by 0.8 pips. The client sees 1 pip, and for 0.10 lot in an unchanged market, the full round-trip cost is 1 USD. Adding 0.8 pips again would produce an incorrect 1.8 USD. If the documentation states a markup of 0.4 pips on each side of the price, the whole spread also increases by 0.8 pips. The unit and description of the markup must be explicit.

Two quotes for a 0.10-lot EUR/USD long: a 1-pip entry spread and 3-pip exit spread; midpoint P&L USD 20, fill-based P&L USD 18 and price cost USD 2 from the two half-spreads.
Commission and financing excluded. Do not add two full spreads.

2.2. Variable and fixed spreads — what to compare

A variable spread may change with the provider’s prices, liquidity, risk and trade size. “From 0.0” does not state the median, the price for a particular volume or the availability of that level. Illustrative observations of 0.5 pips in one hour and 3 pips in another are possible, but without data they do not characterise all EUR/USD accounts.

A fixed spread means an offering with a specified width under the product terms. Documentation may include exceptions for particular hours or events. A fixed width does not ensure no slippage, continuous quotations or execution of the full volume. It cannot be judged more or less expensive in advance without comparing total costs under the same conditions.

Variable and fixed spreads
FeatureA variable spreadA fixed spread
Width in quiet conditionsVaries with the provider’s feedSpecified in the offering, with possible exceptions
Stress and data releasesPossible widening or no available quoteCheck exceptions, continuity and execution rules
Comparison calculationSpread distribution for the relevant times and amountsFixed spread plus other fees and fills

A comparison should include all attempts, including those unfilled. A narrower spread need not produce a lower cost if more requests are rejected and subsequently filled at worse prices. Trigger, slippage and partial-execution rules are explained in article 2.7.

2.3. Spread widening and rollover

Global FX turnover does not determine a particular CFD’s liquidity in a particular second. What matters for cost is the quote available for the requested amount. Conditions may change around announcements, session endings, currency holidays and financing updates. There is no single spread range or time of peak liquidity that applies to every pair and provider.

  • Time of day. EUR and GBP pairs often benefit from European activity, while JPY also benefits from Asian activity. This does not imply that the entire European night is the best window for all yen pairs. Time zones and clock changes are discussed in the section on trading hours.
  • Data releases. Price uncertainty and limits on available amounts may widen the spread. The magnitude requires measurement with the particular provider; a general “5–10 times” multiple is not a specification parameter.
  • Breaks and holidays. The symbol’s opening hours and both currencies’ calendars affect quotations and financing. Reduced activity does not always occur at the same time.
  • Less liquid instruments. Compare the width with the monetary pip value, size and quote status. The number of pips alone does not correctly compare costs across pairs.

Record the spread at the decision and execution times, the volume and the time zone. An average from arbitrary hours may omit the very moments when orders were submitted. The calendar helps identify sample conditions; it does not establish whether a particular execution had to be worse or whether widening complied with the agreement.

Rollover and the trigger price. The financing charge time is a provider parameter; it does not always correspond to midnight on the client’s computer. Wider quotes are possible around it. For a stop, the side checked by the system matters. A widening ask may trigger a short position’s SL even though the bid remained below the level. Saying “the spread widened” is insufficient: the position direction, prices and distance are needed.
A worked AUD/NZD model. We assume the standard ask trigger for a short position. The bid remains at 1.0800, the ask before the change is 1.0803, and the SL is 1.0825. The initial spread is 3 pips, with the ask 22 pips from the SL. If the spread increases to 22 pips, ask 1.0822 still does not reach the SL. Only a spread of 26 pips gives ask 1.0826 and meets the condition. This still does not establish the fill price. All rates are hypothetical; activation and reconstruction are described in the short-stop example in 2.7.

2.4. Spread cost by volume in USD, EUR and PLN — a table

In EUR/USD, the pip value is generated in US dollars. If your account is funded in USD, you pay the spread directly in dollars: at 0.01 lot, one pip = $0.10. If your account is in EUR or PLN, that amount must be converted at the execution-side conversion rate: at 1.0850 USD/EUR it is roughly €0.09, and at 4.00 PLN/USD it is 0.40 PLN. The table below covers common volumes:

Spread cost amounts in USD (EUR / PLN equivalent)
VolumeSpread 0.5 pipsSpread 1.0 pipSpread 1.5 pipsSpread 3.0 pips
0.01 lot (micro)$0.05 (€0.05 / 0.20 PLN)$0.10 (€0.09 / 0.40 PLN)$0.15 (€0.14 / 0.60 PLN)$0.30 (€0.28 / 1.20 PLN)
0.05 lot$0.25 (€0.23 / 1.00 PLN)$0.50 (€0.46 / 2.00 PLN)$0.75 (€0.69 / 3.00 PLN)$1.50 (€1.38 / 6.00 PLN)
0.10 lot (mini)$0.50 (€0.46 / 2.00 PLN)$1.00 (€0.92 / 4.00 PLN)$1.50 (€1.38 / 6.00 PLN)$3.00 (€2.76 / 12.00 PLN)
0.50 lot$2.50 (€2.30 / 10.00 PLN)$5.00 (€4.61 / 20.00 PLN)$7.50 (€6.91 / 30.00 PLN)$15.00 (€13.82 / 60.00 PLN)
1.00 lot$5.00 (€4.61 / 20.00 PLN)$10.00 (€9.22 / 40.00 PLN)$15.00 (€13.82 / 60.00 PLN)$30.00 (€27.65 / 120.00 PLN)

Table assumptions: hypothetical EUR/USD, contract size 100,000 EUR/lot, pip 0.0001 ($10/pip per 1.00 lot), EUR equivalents converted at 1.0850 USD/EUR and PLN equivalents converted at 4.00 PLN/USD (rounded to two decimal places). The stated cost corresponds to one full spread when entry and exit spreads are equal, with no slippage or other fees. For varying spreads, use the two halves as described in section 2.1. You can check custom pairs and volumes with our pip calculator and trading costs calculator.

In the model, 0.10 lot with a 1.5-pip spread costs $1.50 (€1.38 / 6.00 PLN) per full round trip. At 20 such round trips a day, that is $30 (120 PLN); with an assumed 20 days per month, $600 (2,400 PLN); and over 12 identical months, $7,200 (28,800 PLN). That is 288% of an initial capital of $2,500 (10,000 PLN) if we choose that capital as the reference. This is neither a forecast nor proof that an account can sustain that turnover throughout a year: prices, volume, balance and activity change. Frequency scales the cost calculation.

3. Commission — establish the unit and both sides first

3.1. How to calculate commission

Commission is a separate fee, whether the account is called Raw, Pro or something else. The rate may depend on volume, trade value, product and account currency. Raw spread usually describes an offering with a separate commission and a stated narrower spread; it does not prove the absence of a price markup or the origin of every tick. Compare the actual specification and charging method.

The labels ECN and STP do not determine the cost calculation. In this article, standard means an illustrative 1.2-pip spread without a separate commission, and raw means a 0.1-pip spread plus the stated commission. We do not automatically assign them an order route or a conflict of interest. These issues are covered in broker execution models.

Commission formula:
Total commission = rate (USD/lot, round turn) × volume (lots)

Hypothetical rate: 7 USD per lot round turn, covering the full opening and closing cycle. The examples assume proportional charging without a minimum fee. Examples at a rate of 7 USD/lot R.T.:
• 0.01 lot → 0.07 USD (0.28 PLN)
• 0.10 lot → 0.70 USD (2.80 PLN)
• 0.50 lot → 3.50 USD (14.00 PLN)
• 1.00 lot → 7.00 USD (28.00 PLN)

Per side means one side, while round turn means the full round trip. A rate of 3.50 USD/lot per side on entry and exit with unchanged volume gives 7 USD/lot in total. “3.5 USD per lot” without the scope is incomplete. Charging may occur in two entries or upfront for the whole round trip — the price schedule determines this, not the rate’s name. Also check charges for partial closure, rounding and minimums.

Volume discounts require a definition of turnover: whether both sides are counted, the calendar period, notional amounts in USD or the lot count of specified symbols. Do not add a lot of EUR/USD and a lot of another CFD as equivalent cost units. Threshold conditions and when a new rate applies should be specified in the documentation.

If commission is in USD and the account in PLN, a conversion method is needed. A simple 7 USD/lot rate at an assumed conversion rate of 4.00 gives 28 PLN/lot; the actual entry may differ. The provider may use a rate from a specified time, side or with an added margin. Do not assume that every provider converts commission at an average rate or at the same moment as the position P&L.

3.2. Spread-only or raw plus commission — which costs less?

First convert both models to the same monetary amount for a full round trip. Capital size and the name of the trading style do not determine which model costs less. With linear rates, the same model will be cheaper by the same percentage at every volume; a minimum or fixed fee can change this.

Our illustrative model: standard has a 1.2-pip spread; raw has 0.1 pips and a 7 USD/lot round-turn commission without a minimum. For EUR/USD with pip 0.0001 and contract size 100,000 EUR/lot, a pip is worth 10 USD per lot. We compare equal entry and exit spreads, without financing, conversion or slippage:

Raw and standard with linear commission
VolumeBuilt-in spread (1.2 pips)
Cost
Raw + commission (0.1 pips + 7 USD/lot R.T.)
Cost
Cheaper
0.01 lot0.12 USD0.01 + 0.07 = 0.08 USDRaw + commission (33% cheaper)
0.05 lot0.60 USD0.05 + 0.35 = 0.40 USDRaw + commission (33% cheaper)
0.10 lot1.20 USD0.10 + 0.70 = 0.80 USDRaw + commission (33% cheaper)
0.50 lot6.00 USD0.50 + 3.50 = 4.00 USDRaw + commission (33% cheaper)
1.00 lot12.00 USD1.00 + 7.00 = 8.00 USDRaw + commission (33% cheaper)

Under these assumptions, raw costs 8 USD per lot and standard 12 USD, making raw one-third cheaper. This does not imply a lasting raw advantage at other times. If the effective raw spread over the full round trip increases to 0.5 pips, the cost is 5 + 7 = 12 USD/lot and the models become equal, with standard unchanged. In practice, both must be measured simultaneously.

A commission minimum changes the boundary. At 0.01 lot, the raw spread costs 0.01 USD. A minimum of 0.10 USD for the entire round turn gives 0.11 USD in total, still less than the standard 0.12 USD. If the minimum is 0.10 USD per side, the full round-trip commission is 0.20 USD and the total raw cost is 0.21 USD — making standard cheaper. Without specifying per side or round turn, a minimum-charge example cannot settle the comparison.

A full round trip of one EUR/USD lot: standard 12 USD, raw 8 USD, equal at a raw spread of 0.5 pips.
With linear commission and constant spreads, frequency scales the total but does not change the cost ordering for one round trip. A minimum fee requires a separate calculation.

Commission per million and the minimum boundary

An illustrative fee of 25 USD per million USD of notional amount on each side is not automatically a rate of 2.50 USD per EUR/USD lot. For 0.10 lot, or 10,000 EUR, at an entry price of 1.08505, the buy leg’s value is 10,850.50 USD. The commission on that leg is 10,850.50 / 1,000,000 × 25 = 0.2712625 USD. At exit price 1.08694, the value is 10,869.40 USD and the fee 0.271735 USD. Together, these give 0.5429975 USD before rounding, or around 0.54 USD. You must know the currency in which the million is measured and whether both legs are valued separately. This model omits minimums and intermediate rounding; an actual price schedule may apply them.

In a model with a 0.1-pip raw spread and a commission of 3.50 USD/lot per side, with a 0.10 USD minimum per side, the full cost for volume L is:

Raw = 1 USD/lot × L + 2 × max(3.50 USD/lot × L; 0.10 USD).
Standard = 12 USD/lot × L.

Commission minimum and full round-trip cost
VolumeRaw: spread + commissionStandardModel conclusion
0.01 lot0.01 + 0.20 = 0.21 USD0.12 USDStandard cheaper by 0.09 USD
0.02 lot0.02 + 0.20 = 0.22 USD0.24 USDRaw cheaper by 0.02 USD

In the minimum-fee branch, costs become equal at L + 0.20 = 12L, giving L = 0.20 / 11 ≈ 0.01818 lot. With a volume step of 0.01, the exact boundary is not a permitted volume. This illustrates dependence on the price schedule and specification, rather than recommending a larger position to reduce the percentage cost.

4. Swap (rollover) — the overnight cost of a position

4.1. The financing source and the CFD rate

In the underlying market, moving the currency settlement date involves financing prices and forward points. Tom/next concerns a move between consecutive value dates. Some CFD offerings use this mechanism as the basis for overnight financing, but the client’s rate includes the product terms and provider’s cost. It is not a simple subtraction of the Fed rate from the ECB rate. Other models may use percentage rates or reopen the contract.

Long and short directions for the same pair have separate rates. They may have opposite signs, but both may also be negative. Interest-rate or financing-condition changes may affect future pricing, but they do not ensure a particular sign for a CFD swap. Use the rate applicable when the charge was made, rather than a central bank rate reported in the news.

A long EUR/USD CFD position gives economic exposure to EUR against USD. It does not mean the client has a separate euro deposit and dollar loan agreement. Financing is a contract parameter. Its cost for the same number of lots does not fall simply because the account allows higher leverage; margin and financing are separate quantities.

Read the charging time and time zone, swap mode, currency, long/short rates and day multipliers in the documentation. Do not assume every broker uses server midnight or 17:00 New York time (22:00 GMT / 23:00 CET). Differences in daylight-saving clock changes between US, European and server schedules can shift the relationship between those times. Holding across the specified rollover may result in a charge despite a short total holding period.

4.2. How to calculate swap

In MT5, the Market Watch → Specification window contains the symbol parameters. Reading Swap Long alone without the mode and multiplier is incomplete. In cTrader, the Active Symbol Panel shows long/short swap and the triple-rate day, among other information; the scope depends on the application. On other platforms, look for the instrument specification and financing table. Save the data with a date.[1][2]

How to calculate swap in practice:
First establish the charging mode. The following model uses an amount in USD per lot per single unit, rather than points or a percentage. The sum of multipliers N replaces the imprecise number of “nights”. A positive value is an account credit; a negative value is a debit. Example (illustrative values — your broker may use different ones):
EUR/USD, hypothetical long swap: −5.00 USD/lot per single charging unit EUR/USD, hypothetical short swap: +1.50 USD/lot per single charging unit Financing = volume in lots × rate × sum of multipliers N. We assume a constant rate over the model period: • 0.10 lot, long, N = 5: 0.10 × (−5.00) × 5 = −2.50 USD • 0.10 lot, short, N = 5: 0.10 × (+1.50) × 5 = +0.75 USD • 1.00 lot, long, N = 1: 1.00 × (−5.00) × 1 = −5.00 USD

With a per-lot rate, cost scales with volume. In percentage mode, the base is the notional amount and the price specified by the method, rather than reserved margin. The same position at a different maximum leverage has the same financed notional amount. A larger volume increases the amount; the relationship with margin is developed in article 2.6.

Swap in points — how to convert it.
MetaTrader distinguishes points, amounts in the base, margin, profit or account currency, annual percentage rates and reopening modes. The Swap Long/Short unit depends on SYMBOL_SWAP_MODE. A value of −7.2 without that parameter cannot automatically be treated as dollars.[1] In a points model: financing = rate in points × monetary point value per lot × volume × multiplier. With our EUR/USD point size of 0.00001 and contract size of 100,000 EUR/lot, the point value is 1 USD per lot. This follows from the specification, rather than being a rule for every symbol. For a long rate of −7.2 points and multiplier 1: 1.00 lot gives −7.20 USD, and 0.10 lot −0.72 USD. With multiplier 3, those amounts are −21.60 and −2.16 USD. The result currency and conversion must be established separately. The parameters SYMBOL_SWAP_MONDAY…SYMBOL_SWAP_SUNDAY describe day multipliers; zero, one and three rates have different effects. Holidays and specification updates require the correct calendar to be read. Do not add a second “weekend” to a multiplier that already includes it.

With variable rates, calculate each charge separately and then the total. An average from today’s table cannot reconstruct a month in which the rate changed. Historical results are confirmed by account entries; a forecast requires assumptions about future rates and the calendar. Clearly separate these two activities.

Hypothetical points specification for 0.20 lot of EUR/USD and multiplier 3: long minus 4.32 USD, short plus 0.90 USD.
POINTS mode requires the point value, volume, multiplier and currency. These rates should not be read as pips or USD per lot.
Markup may already be included in the rate. If the long/short table shows the client’s final financing, do not add an assumed provider markup again. Only a fee identified as a separate component is recorded separately. Different rates in the two directions do not prove that they depend exclusively on a markup; the contract method and financing cost also matter.

To test swap amounts across different position sizes, quote units and triple-swap days on your own pair, use our overnight swap calculator.

Reading a points specification in full

A hypothetical EUR/USD CFD symbol: contract size 100,000 EUR/lot, point 0.00001, swap mode POINTS, long −7.2 points, short +1.5 points and multiplier 3 for the specified day. The result currency in this linear model is USD and the account is in PLN; for the example, we assume 4.00 PLN/USD without a markup. Volume is 0.20 lot. We do not use the −5 USD rate from the previous model — this is a different specification.

Point value per lot = 100,000 EUR/lot × 0.00001 USD/EUR = 1 USD/lot.
Long = −7.2 × 1 USD/lot × 0.20 lot × 3 = −4.32 USD = −17.28 PLN.
Short = +1.5 × 1 USD/lot × 0.20 lot × 3 = +0.90 USD = +3.60 PLN.

With multiplier 1, long would be −1.44 USD and short +0.30 USD. Reading “−7.2” as pips rather than points would produce a tenfold error under this specification. When tick size differs from point size, the monetary point value must be established from the relevant parameters, such as tick value and the point/tick-size ratio, allowing for the result currency. Detailed units are discussed in article 2.4.

Percentage mode requires a different calculation. With an illustrative profit-currency notional amount of 10,850 USD, an annual rate of −4% and a 360-day basis, a single unit costs 10,850 × 0.04 / 360 ≈ 1.20556 USD. Three units give around 3.61667 USD. We do not multiply by 0.10 lot again if the 10,850 USD notional already represents that position. Whether the opening or current price is used as the base must follow the mode; this example is not a formula for every swap.

4.3. Triple charging and the calendar

Many spot FX trades have a standard value date of T+2, but exceptions and both currencies’ calendars apply. For an illustrative T+2 pair without holidays, moving the value date from Friday to Monday covers three calendar days. The associated charge for three rates often falls at Wednesday’s CFD rollover. This does not make the client’s contract a physical spot transaction; its specification and multipliers are decisive. [8]

Apply multiplier 3 only on the correct day for the symbol. Not every instrument uses Wednesday, and holidays may change the number of days covered by financing. The table of nominal long/short rates and the calendar form one data set; neither alone is enough to calculate a full period.

Example — a long position of 0.10 lot in EUR/USD, swap −5.00 USD/lot/night:
Ordinary night: 0.10 × (−5.00) = −0.50 USD
Wednesday (triple): 0.10 × (−5.00) × 3 = −1.50 USD

For 1.00 lot: ordinary night = −5.00 USD, Wednesday = −15.00 USD.

All values are illustrative. For another symbol or calendar, the triple amount may apply on a different day or take a different form. A country’s interest rates do not replace the financing table.

Do not copy the EUR/USD calendar to gold, indices or other CFDs. Also check whether the provider uses weekend charges, points, a percentage or a futures contract with a separate rollover cost. These calculations concern the specified currency contract.

An illustrative week with multipliers Monday 1, Tuesday 1, Wednesday 3, Thursday 1, Friday 1, Saturday and Sunday 0 gives a total of 7. Five charging events cover seven single-rate units. For a period between two specified moments, add only the rollovers actually crossed by the position.

Hypothetical weekly financing multipliers from Monday to Sunday: 1, 1, 3, 1, 1, 0, 0; five charging events produce seven units, with no second weekend charge.
Hypothetical holiday-free week. Read the day and multiplier from the symbol specification.

4.4. Positive financing and rate changes

A positive swap is an account credit, rather than a guarantee of a profitable position. At a hypothetical short rate of +1.50 USD/lot and a sum of multipliers of 30, a 1.00-lot position receives 45 USD. A 5-pip adverse price move causes a 50 USD loss before other costs. Financing income and exchange-rate exposure must be calculated separately.

Carry trade may exploit the difference between income and financing but is not simply a matter of choosing a positive CFD swap. We leave strategy assessment and historical deleveraging examples to that section and the article on funds and HFT. Here, we account for a positive swap as a signed cash flow in the cost calculation, without recommending a position direction.

A rate-change model. Constant volume of 0.50 lot and a sum of multipliers of 30. At a rate of −15 USD/lot per unit, the cost is 0.50 × 15 × 30 = 225 USD. At −80 USD, it is 1,200 USD. We do not know future pricing, so these are two scenarios. If the first 10 units were charged at −15 and the next 20 at −80, the actual sum is 0.50 × (−15 × 10 − 80 × 20) = −875 USD, rather than 1,200 USD. Rate-update and notification rules follow the agreement and the provider’s applicable obligations.

4.5. Islamic (swap-free) accounts — how they actually work

Swap-free, often offered as an Islamic account, has a defined scope of swap exemption. The label does not establish the absence of holding fees or availability to every client. Check eligibility conditions and pricing. IC’s official offering illustrates separate holding fees and a grace period; those are the terms of that offering, rather than the entire industry.[6]

  • A separate holding fee may apply after a specified number of days; check whether these are calendar or trading days.
  • A different spread or commission may apply; calculate the difference for the same instrument, volume and time.
  • Instrument, grace-period or client-eligibility restrictions; the absence of swap on one position does not describe the entire account.

You cannot conclude that swap-free is always advantageous for a long holding period or always more expensive for a short one. Complete rates and the calendar determine the outcome. If the position does not cross rollover, financing may be zero under both offerings, although spread and commission can still differ.

A short swap-free calculation on a common calendar. We assume 1.00 lot, 15 consecutive calendar nights, a hypothetical 5-night grace period and an 8 USD administration fee for each further night, including weekends. The fee is (15 − 5) × 8 = 80 USD. Under a separate standard schedule, we assume 11 rollover events: 9 single and 2 triple, giving N = 9 + 2 × 3 = 15. A rate of −5 USD/lot produces 75 USD of cost. We do not add weekends again to those 15 units. If the actual calendar gives a different N, the result changes; both schedules must be calculated for the same opening and closing times. This financing comparison omits price costs and commission.

5. Total position cost — examples for different trading styles

Three illustrative profiles differ in volume, the number of full round trips and financing time. They are hypothetical, rather than histories of individuals. EUR/USD, raw spread 0.1 pips, round-turn commission 7 USD/lot, long −5 USD/lot per unit and conversion at 4.00 PLN/USD. These simple calculations omit slippage and conversion fees; entry and exit spreads are the same.

Intraday profile: 0.10 lot, 15 full round trips a day, each without crossing rollover. The label day trading does not itself ensure zero financing; here, that follows from the assumed closing time.

  • Pip value at 0.10 lot = 1.00 USD
  • Spread cost per trade: 0.1-pip spread × 1.00 USD = 0.10 USD
  • Commission per trade: 0.10 lot × 7.00 USD/lot = 0.70 USD
  • Swap: 0 (closes the same day)
  • Cost per trade: 0.10 + 0.70 = 0.80 USD
  • Daily cost: 15 × 0.80 = 12.00 USD = 48.00 PLN

The model cost is 0.8 pips per full round trip: 0.10 USD spread and 0.70 USD commission, at a pip value of 1 USD. Assuming 20 identical days, the monthly total is 20 × 12 = 240 USD, or 960 PLN. A standard 1.2-pip spread without commission would give 360 USD, or 50% more than raw. This result requires all the stated assumptions; an additional minimum or worse execution can change the comparison.

Weekly profile: 0.20 lot, four positions in an illustrative month, each with a sum of multipliers of 7. An illustrative holiday-free week gives five events, including one triple. We do not charge for seven events plus an additional weekend.

  • Pip value at 0.20 lot = 2.00 USD
  • Spread cost per trade: 0.1-pip spread × 2.00 USD = 0.20 USD
  • Commission per trade: 0.20 lot × 7.00 USD/lot = 1.40 USD
  • Long financing, N = 7: 0.20 × (−5.00) × 7 = −7.00 USD
  • Cost per trade: 0.20 + 1.40 + 7.00 = 8.60 USD ≈ 34.40 PLN
  • Cost of four positions: 4 × 8.60 = 34.40 USD = 137.60 PLN

Financing accounts for 7 / 8.60 = around 81.4% of the model cost. A hypothetical short rate of +1.50 USD/lot with the same N would give a 2.10 USD credit; after subtracting it from the 1.60 USD spread and commission, net cost would be −0.50 USD. This compares the financing of two different exposures, rather than arguing for a change in trade direction.

Longer-holding profile: 1.00 lot long and an illustrative calendar with a sum of multipliers of 30. We do not assume that every 30-day period has exactly that sum.

  • Pip value at 1.00 lot = 10.00 USD
  • Spread cost: 0.1-pip spread × 10.00 USD = 1.00 USD
  • Commission: 1.00 lot × 7.00 USD/lot = 7.00 USD
  • Swap — how do you calculate 30 calendar days?
    An illustrative 22 events, including 4 triple events, give 18 × 1 + 4 × 3 = 30 financing units. In a specific period, the opening and closing times, days with multiplier 0 and the holiday calendar matter. The number of days alone is insufficient.
  • Swap: 1.00 × (−5.00) × 30 = −150.00 USD
  • Total cost: 1.00 + 7.00 + 150.00 = 158.00 USD ≈ 632 PLN

Swap accounts for 150 / 158 = around 94.9% of cost. For a hypothetical short rate of +1.50 USD/lot and N = 30, the credit is 45 USD, and the cost including spread and commission is 8 − 45 = −37 USD. A minus sign in TCO means financing credits outweigh the other cost components, rather than a profit on the whole position. Its price P&L can have either sign.

Conversion applies to entries, not the position’s full notional amount. The provider may convert P&L, commission and financing at different times and under different rules. The amount actually converted and the stated markup are needed separately. In a hypothetical model, absolute converted amounts totalling 2,000 USD and a uniform 0.5% markup give 10 USD, or 40 PLN at a reference rate of 4.00. Twelve identical months would give 480 PLN. Do not assume the fee is always invisible: it may be a separate entry or part of the rate. If already included in the effective rate, do not add it again.

A midpoint-based simulation must model execution prices and the other components. If a backtest already uses the correct bid/ask and actual fills, deducting the full spread again understates P&L. We leave strategy selection to other sections; here, we check whether its cost calculation matches the data.

PLN ledger model: midpoint P&L 80 PLN, actual net P&L 64.37 PLN and cost against the benchmark 15.63 PLN.
The 80 PLN benchmark splits into 64.37 PLN net P&L and 15.63 PLN TCO. Spread and slippage are not deducted from fills again. The CSV ledger shows each entry.

TCO ledger: from actual fills to account-currency entries

Our illustrative long position of 0.10 lot in an EUR/USD CFD has a notional amount of 10,000 EUR. At entry, bid/ask is 1.08498/1.08502 and midpoint 1.08500; the buy fill is 1.08505. At exit, bid/ask is 1.08696/1.08704 and midpoint 1.08700; the sell fill is 1.08694. In this model, the 7 USD/lot round-turn commission is charged in one entry at closure. Long financing is −5 USD/lot per unit, with two events using multipliers 1 and 3. All data are hypothetical, and the ledger illustrates how to reconcile an actual statement.

Price cost relative to the midpoints of both events
ComponentCalculation for 10,000 EURAmount
Half of the entry spread(1.08502 − 1.08500) × 10,0000.20 USD
Half of the exit spread(1.08700 − 1.08696) × 10,0000.40 USD
Buy deterioration relative to the ask(1.08505 − 1.08502) × 10,0000.30 USD
Sell deterioration relative to the bid(1.08696 − 1.08694) × 10,0000.20 USD
Total price cost0.20 + 0.40 + 0.30 + 0.201.10 USD

Midpoint P&L is 10,000 × (1.08700 − 1.08500) = 20 USD. Actual-fill P&L is 10,000 × (1.08694 − 1.08505) = 18.90 USD. The 1.10 USD difference matches the table. Financing is −5 × 0.10 × (1 + 3) = −2 USD, and commission −0.70 USD. P&L after those entries: 18.90 − 2.00 − 0.70 = 16.20 USD. We do not deduct the spread or 0.50 USD of slippage again from 18.90 USD — they are already included in the fill prices.

For conversion, we assume a common hypothetical reference rate of 4.00 PLN/USD. In this model, the provider converts positive USD at 3.98 and negative USD at 4.02; the difference is the assumed conversion cost, rather than a universal broker practice. Each entry is rounded to 0.01 PLN. No second, separate fee is charged. In an actual history, the reference rate must be established at the same times, to avoid calling a USD/PLN market move a markup.

Four entries and reconciliation of PLN P&L
EntryUSD amountPLN/USD ratePLN entry after rounding
Financing, multiplier 1−0.504.02−2.01
Financing, multiplier 3−1.504.02−6.03
Price P&L at closure+18.903.98+75.22
Round-turn commission−0.704.02−2.81
Sum of entries+16.20Different rates+64.37 PLN

Converting the entire 16.20 USD at 4.00 would give 64.80 PLN. The difference from the summed entries is 0.43 PLN. Without rounding, the conversion cost is (18.90 + 2.00 + 0.70) × 0.02 = 0.432 PLN; posting to 0.01 PLN gives the stated result. No 0.5% charge applies to the whole 10,000 EUR notional amount, and positive and negative entries cannot first be arbitrarily netted if the agreement provides for separate conversions.

The common midpoint benchmark is 20 USD × 4.00 = 80 PLN. TCO relative to it is 4.40 PLN price cost + 2.80 PLN commission + 8.00 PLN financing + 0.43 PLN conversion = 15.63 PLN. Check: 80 − 15.63 = 64.37 PLN, matching the sum of entries. This is a cost relative to an explicit benchmark, rather than just the sum of deductions in the history. The midpoint was not a guaranteed fill price.

USD and EUR account equivalents (same fills, zero vs. EUR/USD conversion spread): in a USD-denominated account, no FX conversion applies, so the fills give +18.90 USD, commission is −0.70 USD, and the two swap entries total −2.00 USD, leaving +16.20 USD net against the +20.00 USD midpoint benchmark — a TCO of 3.80 USD (1.10 USD spread and slippage + 0.70 USD commission + 2.00 USD financing). In a EUR-denominated account at a 1.0850 USD/EUR midpoint, the midpoint benchmark is 18.43 EUR (zero-conversion-spread net: +14.93 EUR, TCO 3.50 EUR); with a symmetric conversion spread of 1.0900 on the USD profit (+17.34 EUR) and 1.0800 on the USD deductions (−0.65 EUR, −0.46 EUR, −1.39 EUR), the ledger sums to +14.84 EUR net, making TCO 3.59 EUR (including 0.09 EUR conversion spread).

Download the CSV containing this model’s assumptions and entries. To reconstruct your own calculation, you need fill prices and quantities, fee amounts, multipliers and actual conversion rates and dates. Do not replace missing values with today’s price schedule.

6. How to compare costs between brokers

In a pre-trade estimate, TCO includes price cost, separate commissions, financing, conversion and other separately charged fees. Positive financing and price improvement may reduce the total. A markup included in the final spread or swap is not a new entry. After execution, use actual fills or their decomposition relative to a chosen benchmark; these two methods must not be added together.

Step 1 — define the comparison unit. The same pair, contract size, volume, direction, entry and exit times, and account currency. A common financing calendar is as important as the spread. Separate the cost of one round trip from monthly activity.

Step 2 — collect the specification and execution attempts. Convert the commission rate from per side to the full round trip; check its minimum and currency. Record swap mode, long/short, multipliers and conversion. Compare prices at the same times and for the same sizes; arbitrary hours such as “12:00–16:00 CET” cannot replace your own data set. A demo may help you read the panel but does not establish identical fills on a live account.

Step 3 — calculate Total Cost Per Trade (TCPT).

TCPT in a simplified comparison = full round-trip spread cost + round-turn commission − signed financing. Full TCO also requires slippage relative to the appropriate prices, conversion and separate fees. Positive financing reduces the cost; negative financing increases it.

Three hypothetical offerings, rather than identified brokers. A position of 0.10 lot in EUR/USD ($1.00/pip), N = 3 (the sum of multipliers, not any three nights), long swap −5.00 USD/lot per unit ($1.50 USD financing cost), and USD/PLN conversion at 4.00 (6.00 PLN financing cost):
• Offering A (spread 1.2 pips): $1.20 + $0 + $1.50 = $2.70 USD (10.80 PLN)
• Offering B (raw 0.1 pips + $7/lot RT): $0.10 + $0.70 + $1.50 = $2.30 USD (9.20 PLN)
• Offering C (spread 2.5 pips): $2.50 + $0 + $1.50 = $4.00 USD (16.00 PLN)

Financing: $5.00/lot × 0.10 lot × 3 = $1.50 USD (6.00 PLN at 4.00 PLN/USD). You can run side-by-side scenarios with custom spreads, commissions and swap rates in our trading costs calculator and profit & loss calculator. This simplification assigns the same financing rate to every offering; in reality, spreads, financing, execution and conversion may differ, so the table’s result alone does not create a ranking.

Slippage and non-execution require separate documentation. A requote is not itself a monetary deduction; a later fill may be more expensive, better or absent altogether. Executed-trade history alone is insufficient to assess rejections. The comparison points to source data, rather than an obligation to open test positions with your own capital.

A spread comparison tool shows a particular sample and method, often for accounts different from yours. Check whether it measures minimum, average or current spread, over what period and whether commission is included. Do not use it to reconstruct a particular overnight fill. Your existing logs and the provider’s cost statement contain information of a different scope.

Cost statements in the EU. MiFID II, Article 24(4)(c), and Regulation 2017/565, Article 50, provide for disclosure of relevant costs and charges and their effect on returns. The scope of ex-ante and periodic ex-post information follows the rules and type of service; it does not mean an individual forecast of future slippage for every trade. Reports may use estimates or aggregated data. To reconcile your TCO, check the period, currency, amounts included in prices and separate deductions. The legal section covers the full regulations.[4][5]

7. Six rules for controlling costs

1. Compare the complete offering. Raw is not automatically cheaper for a scalper, and standard is not automatically better for a small account. Calculate the same volume, both commission sides, minimums and effective spread. Monthly trade frequency scales the same calculation; it does not alter it without thresholds or fixed fees.

2. Record the price conditions. Time, time zone, volume and market events allow comparable samples to be compared. A narrower spread at one moment does not guarantee a narrower exit spread. Check session boundaries and clock changes in the section on trading hours, rather than assigning one window to every pair.

3. Separate the plan from execution. Include wider-spread and price-change scenarios in the estimate, then record actual fills after the trade. Closing before a data release creates its own round trip and cost; it is not a universal way to reduce cost. Orders and price restrictions are described in article 2.7.

4. Use the rate for the correct direction. Long and short have separate financing. A positive swap on one side is not an argument for changing exposure without assessing its risk. Preserve the sign in TCO: a positive credit is subtracted from cost, while a negative debit increases it.

5. Establish the sum of multipliers. For N = 14 and a rate of −5 USD/lot, financing costs 70 USD per lot, 7 USD at 0.10 lot and 21 USD at 0.30, or 84 PLN. At a pip value of 10 USD per lot, this equals 7 pips. The result in pips is the same for linear volume, but N = 14 does not mean any 14 consecutive overnight charges. Calculate N from the specific calendar. The risk management section covers the full risk/reward methodology.

6. Reconcile the total with the statement. Collect price P&L, commissions, financing, conversion and other separate fees. Check whether costs were charged upfront, at the end or during the holding period. The provider’s ex-post report may help reconcile aggregates, but its method and period must match the comparison. Do not add a cost already included in the effective rate or a separate entry.

Three cost checks: comparable round trips, financing specification and reconciliation of actual PLN entries.
Cost control requires comparable data, correct financing units and reconciled entries. The lowest advertised spread alone does not determine TCO.

8. Before opening an account: 5 questions about costs

  1. What price and size are measured? A spread of 0.5 rather than 2 pips is four times smaller at the same pip value, but it does not describe other fees or execution availability.
  2. How is commission quoted? Per side, round turn, lot or million; in which currency, with what minimum and rounding rule?
  3. How is financing charged? Swap mode, long/short rates, day multipliers and the rollover time and time zone.
  4. How are entries converted into PLN in this example? Check rates, markup, charging times and whether the fee is separate or included in the price.
  5. Are there other holding conditions? Swap-free, a grace period, holding fee, account fee or other separately charged components.

Check whether a cost was deducted twice

P&L from actual fills is +50 USD. Commission is a 7 USD debit and financing a +3 USD credit. The author of the statement adds another 10 USD of spread and reports 36 USD net. Is the result correct? We assume no other fees or conversion.

Answer and calculation

No. The spread is already included in fill-based P&L. Net P&L is 50 − 7 + 3 = 46 USD. The amount of 36 USD results from deducting 10 USD again. If 50 USD were midpoint P&L and 10 USD the correctly established price cost relative to those midpoints, the 36 USD calculation could make sense. The starting point must be named first.

FAQ — frequently asked questions

Should the spread be deducted from P&L calculated from execution prices?

No, if P&L was calculated from the actual buy ask and sell bid, or the corresponding bid and ask for a short. The price cost is already included in those fills. Account separately for commission, financing, conversion and separate fees. Analysing spread cost relative to midpoints is a different way of decomposing the same result.

Does raw spread always cost less than standard?

No. Compare spread, full round-trip commission, minimums, execution and other costs. With linear rates, frequency alone scales the total but does not change the cost ordering for one round trip. A per-side minimum can change the result for a small volume.

How do I convert a swap quoted in points?

First confirm swap mode POINTS, point size, contract size, monetary point value per lot and result currency. In the appropriate model, the amount is the rate in points times point value per lot times volume times the day multiplier. Then apply the correct currency conversion. Do not read points as pips or dollars.

Does triple swap always fall on Wednesday?

No. For many FX pairs, it is linked to the value date moving across the weekend, but the symbol’s calendar is binding. Check day multipliers, holidays and the rollover time. Five events with one triple may mean seven single-rate units, rather than five plus an additional weekend counted twice.

Does a positive swap mean a profitable position?

No. Positive financing is an account credit and reduces TCO, but price P&L and other costs may outweigh it. Long and short rates can change and do not follow solely from the central bank interest-rate differential. The whole position must be accounted for using actual entries.

How do I account for currency conversion on a PLN account?

Establish the amounts actually converted, times, rates and rounding rules. P&L, commission and swap may be converted separately. Do not add a markup included in the effective rate again. Comparing against a reference rate requires matching times to distinguish conversion cost from a USD/PLN market move.

Sources and further reading

  1. MetaQuotes: Symbol Properties — Swap mode, currencies, long/short, point size and day multipliers.
  2. Spotware: Active Symbol Panel — Swap and specification information in cTrader.
  3. BIS: FX execution algorithms and market functioning — TCA, benchmarks and limitations of execution data; the wholesale market, rather than a CFD price schedule.
  4. MiFID II: Directive 2014/65/EU — Article 24(4)(c): information on costs and charges. Current consolidated text: 6 June 2026.
  5. EU Delegated Regulation 2017/565 — Article 50 and Annex II: cost scope, aggregation and ex-ante/ex-post information. Current consolidated text: 2 August 2022.
  6. IC: swap-free terms — Example holding fees and grace period from one offering; neither a recommendation nor an industry rule.
  7. IG UK: overnight funding — Example FX financing based on tom/next and an administration charge; a provider’s offering.
  8. CLS/FNA: Reimagining same-day FX — 6 March 2025, market overview: T+2 as the predominant CLSSettlement convention, with T+1 and same-day exceptions; not a CFD financing tariff. Accessed 15 November 2026.

The numerical scenarios are our own educational models. Platform documentation and examples of offerings confirm the design of the described functions but do not replace the agreement and data for a particular account.

Your learning progress

Finished this lesson? Mark it yourself. Opening or scrolling a page never marks it complete.

Progress requires JavaScript and browser storage.

Saved only in this browser. No account or cross-device sync. Clearing site data can erase your progress.

Jarosław Wasiński

Editor-in-chief, ForexMechanics.com • Macro & FX analyst

Independent analyst and practitioner with over 20 years of experience in financial markets. Actively involved in Forex since 2007, with a focus on fundamental analysis, OTC market structure, and disciplined capital risk management.

  • Creator and editor-in-chief of MyBank.pl, providing reliable financial education since 2004.
  • Author of hundreds of in-depth market commentaries, structural analyses, and educational materials for traders and investors.
  • Advocate for market transparency, promoting education grounded in hard data and institutional reports (BIS, ESMA, CFTC).

All content is educational and informational only – it does not constitute investment advice or a recommendation. Remember: leveraged trading (Forex/CFD) carries a high risk of rapid capital loss.